SBWD1000EDU Magnetic Mounting Kit for ScreenBeam Installation Guide
- July 29, 2024
- ScreenBeam
Table of Contents
SBWD1000EDU Magnetic Mounting Kit for ScreenBeam
Product Information
Product Name: Magnetic Mounting Kit for ScreenBeam 1xxx-Series Receiver
Applicable SKUs: SBWD1000EDU, SBWD1000EDUG2, SBWD1100P, SBWD1100F
Specifications
- Mounting Kit Type : Magnetic
- Screw Size: KM4*10mm
- Compatible with ScreenBeam 1xxx-Series Receivers
Product Usage Instructions
- Place the magnetic mounting module onto the bottom of the ScreenBeam receiver, aligning the pins with the mounting holes.
- Slide the magnetic mounting module to lock it in position, ensuring the screw holes align well
- Fasten the magnetic mounting module to the receiver using the provided screws.
- Attach the receiver with the magnetic mounting module to a flat metallic surface.
- Ensure the receiver is magnetized to the surface securely.
Frequently Asked Questions
- Q: Can I use the magnetic mounting kit with other ScreenBeam receiver models?
- A: No, the magnetic mounting kit is specifically designed for use with ScreenBeam 1xxx-Series Receivers only.
- Q: Is it necessary to use the adhesive included in the kit?
- A: The adhesive is optional and can be used for additional stability if needed. It is not mandatory for installation.
Applicable for the following SKUs:
- SBWD1000EDU
- SBWD1000EDUG2
- SBWD1100P
- SBWD1100F
After completing the following steps, you will be able to attach the ScreenBeam receiver to most metal surfaces magnetically.
Installation
Follow the steps below to install the magnetic mounting module:
- Place the magnetic mounting module onto the bottom of the ScreenBeam receiver and align the locking pins with the mounting holes on the bottom.
- Slide the magnetic mounting module to lock it in position, and make sure the four screw holes of the module align well with the screw holes of the receiver.
- Fasten the magnetic mounting module to the receiver with the provided screws.
- Attach the receiver with the magnetic mounting module to a flat metallic surface, and ensure the receiver is magnetized to the surface.
DIMENSIONS
*SCREW SPEC: KM410mm**
Documents / Resources
|
ScreenBeam SBWD1000EDU Magnetic Mounting Kit for
ScreenBeam
[pdf] Installation Guide
SBWD1000EDU, SBWD1000EDUG2, SBWD1100P, SBWD1100F, SBWD1000EDU Magnetic
Mounting Kit for ScreenBeam, SBWD1000EDU, Magnetic Mounting Kit for
ScreenBeam, Mounting Kit for ScreenBeam, ScreenBeam
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>