ELECOM P-TPACSTEN02 series Stylus Pen User Guide

ELECOM P-TPACSTEN02 series Stylus Pen

Product Information

• Materials:
  • Main body: Aluminum
  • Pen tip: Polyacetal
  • USB Type-C Port Cap: Silicone
  • Power switch: ABS plastic
• Dimensions:
  • Length: approximately 155 mm/6.1 in.
  • Diameter of main body: approximately 10 mm/0.4 in.
  • Pen tip: approximately 1.5 mm/0.06 in.
  • Weight: approximately 14 g/0.49 oz

Product Usage Instructions

Charging
To charge the device, follow these steps:

1. Insert the USB Type-C cable into the charging port.
2. Refer to the LED indicator for the remaining charge status.

Power On/Off

To power on the device:

1. Slide the power switch on the top of the unit.
2. The LED will light up, indicating the device is powered on.

To power off the device:

1. Slide the power switch to turn off the device.
2. The LED and power will be turned off.

Auto-Sleep Function
If the device is inactive for approximately 5 minutes, it will enter auto- sleep mode.

To wake up the device:

1. Slide the power switch to OFF.
2. Slide the power switch back to ON.

Note:
The auto-sleep function is vibration-sensitive. Ensure the stylus pen is turned off before storing it to prevent accidental activation.

FAQ

Q: What is the operating time of the P-TPACSTEN02 series?
A: The operating time is approximately 17 hours.

Q: How do I know the remaining charge of the device?
A: The LED indicator will show different colors based on the remaining charge percentage:

• 0% – 10%: Red flashing light
• 11% – 34%: 1 constant blue light
• 34% – 67%: 2 constant blue lights
• 67% – 100%: 3 constant blue lights

Q: What should I do if the LED does not light up when I slide the power switch?
A: Please charge the product using the USB Type-C cable if the LED does not light up when you try to power it on.

Names of parts and their main functions

• Operating time
  Approximately 17 hours

• About charging
  Insert the USB Type-C cable into the charging port to charge.

• The LED will indicate the remaining charge**
  Remaining charge| 0% – 10%| 11% – 34%| 34% – 67%| 67% – 100%
  ---|---|---|---|---
  In operation| Red flashing light| 1 constant blue light| 2 constant blue lights| 3 constant blue lights
  Charging while the power is o| –| 1 flashing green light| 2 flashing green lights| 3 flashing green lights
  Charging while the power is on**| –| 1 green flashing light + 1 blue constant light| 2 green flashing lights + 2 blue constant lights| 3 green flashing lights + 3 blue constant lights

• Power on

  • Slide the power switch on the top of the unit, and the LED will light up and the power will turn on.
  • Please charge this product if the LED does not light up.

• Power off
  The LED and the power will be turned off by sliding the power switch on the top of this product while the power is on.

The auto-sleep function will activate after approximately 5 minutes of inactivity and this product will be turned off. To wake up this product, slide the power switch to OFF, and then slide it to ON again.

• The auto-sleep function is vibration-sensitive.
• When the stylus pen is not turned off before placing it in a pocket or bag, the auto-sleep function may not activate if movement is detected.

Specifications

• Materials
  • Main body: Aluminum
  • Power switch: ABS plastic
  • Pen tip: Polyacetal
  • USB Type-C Port Cap: Silicone
• Dimensions
  • Length: approximately 155 mm/6.1 in.
  • Pen tip: approximately 1.5 mm/0.06 in.
  • Diameter of main body: approximately 10 mm/0.4 in.
  • Weight: approximately 14 g/0.49 oz

Package contents

• Stylus pen
• USB Type-C cable

Usage Precautions

• You may not be able to use the pen on the screen edges on some devices.

• This is to prevent accidental operation.

• Please power off the stylus pen after use.

• Use in an environment of 15 ℃/59 °F or higher.

• Subjecting the stylus to impact, such as dropping it, may damage the pen tip as shown in the figure on the right.

• If the stylus pen is worn out (the metal part is exposed) or damaged as shown in the figure on the right, please replace the pen tip.

  • The replacement pen tip is P-TIPACST02.

• You may not be able to attach this product to your tablet, whether the magnet on the tablet is covered by the shape of the tablet case.

• The operational feel of the stylus pen may differ depending on the user.

• If you are using a liquid crystal screen protective film, it may lead to a decrease in the sensitivity of the stylus pen.

• If you are using a liquid crystal screen protective film, the pen tip may leave scratch marks on the film.

• Using any part other than the pen tip on the screen may lead to damage to the screen.

• Do not tap or rub the screen vigorously with this product.

• Replace the pen tip when it has deteriorated.

• Tilting the pen tip excessively may break the main body.

• Keep out of reach of children to prevent accidental ingestion.

• Do not use alcohol-based agents or other chemicals on this product.

• Direct contact with objects made of resin, such as synthetic leather, may stain the product.

• Avoid exposing the product to high temperatures, humidity, and direct sunlight. Doing so may cause deformation or deterioration of this product and your device.

• Please be aware that we accept no responsibility for any damage, breakdown, or data loss associated with your device.

• Do not subject this product to strong vibration or impact.

• Do not use this product for any purpose other than that indicated herein.

• The sensitivity of the stylus pen may be affected by the usage status of the device and the application used.

• The operation cannot be guaranteed on all devices.

• Do not attempt to disassemble, repair, or modify this product.

• Do not immerse the product in water and use it. Do not touch this product when your hands are wet.

• This product contains magnets. Do not put it close to magnetic cards.

Limitation of Liability

• In no event will ELECOM Co., Ltd be liable for any lost profits or special, consequential, indirect, or punitive damages arising out of the use of this product.
• ELECOM Co., Ltd will have no liability for any loss of data, damages, or any other problems that may occur to any devices connected to this product.

Compliance status

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

To make improvements to this product, the design and specifications are subject to change without prior notice.

Responsible party

• ELECOM USA, Inc. 4041 MacArthur Blvd Suite 400, Newport Beach, CA 92660 USA
• elecomusa.com.

Trademark and name of the manufacturer:

ELECOM CO., LTD.
Fushimimachi 4-1-1, Chuo-ku, Osaka City www.elecom.co.jp/global/.

• ELECOM CO., LTD. owns the copyright of this manual.
• Unauthorized copying and/or reproducing of all or part of this manual is prohibited.
• The images are for illustration purposes only and may differ from your actual product.
• The specifications and appearance of this product may be changed without prior notice for product improvement purposes.
• Please contact the shop where you purchased this product if you have any feedback or questions about the contents of this manual.
• To make improvements to this product and for improved safety, the colors and specifications are subject to change without prior notice.
• We shall bear no responsibility for any device failure or malfunction of other devices resulting from the use of this product.
• When exporting this product, check the export regulations for the country of origin.
• USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
• The company and product names on the packaging and the manual are, in general, trademarks or registered trademarks of their respective companies.

Warranty

• A customer who purchases outside Japan should contact the local retailer in the country of purchase for inquiries.
• In “ELECOM CO., LTD. (Japan)”, no customer support is available for inquiries about purchases or usage in/from any countries other than Japan. Also, no foreign language other than Japanese is available.
• Replacements will be made under the stipulation of the Elecom warranty.

Global Support

www.elecom.co.jp/r/s536

Stylus Pen
Manual, Safety Precautions, and Compliance with Regulations 1st edition, February 6, 2024.

©2024 ELECOM Co., Ltd. All Rights Reserved.

References

• ELECOM USA
• ELECOM Global | エレコム株式会社
• ページを移動します

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>