LLURIA D-JE19.2-RGBW-6P Waterproof Digital Juno Estanca LED Strip Instruction Manual
- July 26, 2024
- LLURIA
Table of Contents
LLURIA D-JE19.2-RGBW-6P Waterproof Digital Juno Estanca LED Strip
Specifications
- Product Name : Waterproof IP67 Digital Juno Estanca 19,2W/m RGBW
- Model: D-JE19,2 RGBW
- LED Strip Reference : D-JE19,2-RGBW-6P
- Color Options: Red, Green, Blue, 3000K
- Lumens per meter : 155 (Red), 395 (Green), 85 (Blue), 600 (3000K)
- Power Consumption: 19.2W/m, 96W total
- Voltage: 24V
- LED Type : 5050
- LED Quantity: 60 LEDs per meter
- IP Rating: IP67
- Length: 5m
Technical data|
---|---
Power| 19,2W/m
Roll power 5m| 96W
IP| 67
Voltage| 24V
LED type| 5050
LEDs/m| 60
LEDs/px| 6
Px/m| 10
Chip IC| UCS512H4
Signal| DMX
Pixel continuity| Sí Yes
Pitch| 16,7mm
Beam angle| 120º
Min. cutting lenght| 100mm
Roll length| 5m
Life time| 50.000h
Ambient temperature| -25~60ºC
Storage temperature| -40~80ºC
Warranty years| 3
Needs heatsink| Sí Yes
Needs controller| Sí Yes
Product Usage Instructions
Waterproof IP67
Digital Juno Estanca 19,2W/m RGBW
High-quality flexible digital LED strip light. Ideal for all types of
installations, general lighting, accent lighting and decorative lighting. For
indoor use.
- Sistema control
Control system
Installation
- Identify the appropriate length needed for installation.
- Cut the LED strip at designated cut marks if necessary.
- Connect the strip to the control system following the provided diagram.
- Ensure proper alignment and secure the strip in place using adhesive backing or mounting clips.
Dimensions
Circuit diagram
Respect the schematic that will be delivered with the position of each of
elements and the resupply.
Power Connection
Connect the power supply to the designated input on the LED strip according to
polarity (+/-).
Assembly detail
- Do not bend the LED strip to adapt them to sharp radius or angle.
- Check that the direction of the arrows or the text “LLURIA” are in the right direction.
- Check the operation of the LED strip before placing it on the profi le.
- The installation of the system must be done without the power being switched on.
- Avoid using the same ignition and wiring or to put LED strips near a 220V signal or devices that may cause interference (motors, fans, washing machines, etc.).
- Follow the order of the installation according to the schematic.
- Leave zones with registers to access amplifi ers, sources and resupply.
- Avoid passing wires in front of the LEDs in the installation to avoid shadows.
- The section of the power wiring from the source to the diff erent resupplies must have a minimum section of 1.5mm for lengths of 10m, 2.5mm for lengths of 20m and 4mm for lengths of 30m.
Control System Setup
- Refer to the control system manual for programming and operation instructions.
- Sync the LED strip with the control system for desired color and lighting effects.
Lifetime
The lifetime of our LEDs is 50.000h at an ambient temperature of 23ºC and
provided with a heat dissipation system. Off cycles are recommended to extend
the life of the LEDs.
Warnings
- To ensure the life of the LED, it is request to place on a surface that dissipates the heat they generate.
- Caution when handling cables to avoid damage to the welds.
- The voltage surges can cause damage.
If diffuser is used with the dissipating profile, there may be variations in the color temperature.
Maintenance
Regularly check for any loose connections or damages to the strip. Clean
gently with a soft cloth if needed.
Lluria reserves the right to modify specifi cations.
FAQ
Q: Can I connect multiple strips together?
A: Yes, you can connect multiple strips together by following the provided
connection guidelines and not exceeding the maximum length.
Q: Is the LED strip suitable for outdoor use?
A: Yes, the IP67 rating ensures the LED strip is waterproof and suitable for
outdoor installations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>