LLURIA MO28 Flex LED Strip with High Light Owner’s Manual
- June 22, 2024
- LLURIA
Table of Contents
LLURIA MO28 Flex LED Strip with High Light
Product Information
Specifications:
- Model: Inside IP20 MOON 28,8
- LED Strip Type: Flex LED strip
- Light Quality: High
- Luminosity: High
- Recommended Use: General lighting installations, indoor use
Product Usage Instructions
Installation:
- Ensure the area where the LED strip will be installed is clean and dry.
- Cut the strip to the desired length if needed, following cutting guidelines if provided.
- Connect the strip to the power source according to the manufacturer’s instructions.
- Secure the strip in place using appropriate mounting hardware or adhesive.
Power Supply:
Use the recommended cables based on the length of the LED strip:
- 5m: 0.75mm2
- 15m: 2.5mm2
- 25m: 4mm2
Maintenance:
Regularly check the LED strip for any signs of damage or malfunction. Clean
gently with a soft, dry cloth if needed.
Frequently Asked Questions (FAQ):
-
Q: Can the LED strip be used outdoors?
A: No, this LED strip is designed for indoor use only. Using it outdoors may result in damage. -
Q: What is the warranty period for this product?
A: The warranty period varies, please refer to the manufacturer’s warranty information provided with the product. -
Q: Can I dim the LED strip?
A: Depending on the model, some LED strips may be dimmable. Refer to the product specifications or contact customer support for more information.
Flex LED strip with high light quality and high luminosity.
Ideal for general lighting installations. For indoor use.
Technical data
Dimensions
Circuit diagram
- Respect the maximum lengths to avoid drops voltage and variations in light intensity.
Cable section
Distance LED – Profile
- Minimum distance that should be left at the ends, both sides, between LED strip and profile.
Assembly detail
- Do not bend de LED strip to adapt them to sharp radius or angle, cut for the cut mark and weld a section of cable to make the turn.
Life time
The life time of our LEDs is 50.000h at an ambient temperature of 23ºC and
provided with a heat dissipation system. Off cycles are recommended to extend
the life of the LEDs.
Warnings
- To ensure the life of the LED, it is request to place on a surface that dissipates the heat they generate.
- Caution when handling cables to avoid damage to the welds.
- The voltage surges can cause damage.
- If diffuser is used with the dissipating profile, there may be variations in the color temperature.
