HUMIDEX HCS Wall Control User Manual
- June 10, 2024
- HUMIDEX
Table of Contents
HUMIDEX HCS Wall Control User Manual
Service and Warranty
For Customer Assistance
To aid in answering questions if you call for service or warranty purposes, please record below the model and serial number located on the side of the unit.
Please Note the above information before contacting us.
IMPORTANT
To properly validate your warranty, you must fill out and return the warranty
card as soon as possible.
If your unit is not registered, a proof of purchase will be necessary should
it require any services. You can also register your warranty online
http://www.clairitech.com/register .
Consumer Limited Warranty
ClairiTech Innovations Inc. warrants to the first consumer that this product, when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its discretion, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for the period(s) set forth below. The defective part must be returned to the manufacturer ClairiTech Innovations Inc. All transportation charges are the sole responsibility of the purchaser.
This warranty does not apply to any appearance items of the product nor to the additional excluded item(s) set forth below of which have been damaged, defaced, subjected to improper voltage, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser must fill out and return the warranty card as soon as possible. If your unit is not registered, a proof of purchase will be necessary should it require any services.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of ClairiTech Innovations Inc.
The warranties described herein shall be the sole and exclusive warranties granted by ClairiTech and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of ClairiTech to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, and strict liability or otherwise. In no event shall ClairiTech be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer, unless approved by ClairiTech in writing. Nor shall ClairiTech be liable or in any way responsible for any incidental or consequential economic or property damage.
This warranty is non-transferable and applies to residential use only
To obtain supply, accessory or product information, contact us.
Refer to Page 2 for Contact Information.
Installation
Description
The HCS Wall Control is intended for the following models:
– HCS-BS (included)
– HCS-CS (included)
– HCS-APT (optional)
– HCS-APTHC (optional)
The LCD display on this unit has a built-in backlight to allow for better
readability in darker locations.
This backlight turns on when any button on the control panel is pressed and
turns off after no button has been pressed on the unit for a period of 10
seconds.
Wiring and Attaching the Control
LCD Display and Control Layout
The following sections of this operating manual refer to the user interface presented below:
The user interface consists of:
- LCD Display
- Up Arrow Button
- Down Arrow Button
- Cancel Button
- Ok Button
The LCD Display
The LCD Display consists of:
- User Set Humidity Level
- Operating Fan Speed
- Desired Max Fan Speed Indicator
Navigating the LCD Menu
The HCS has an LCD display that allows the unit to display information about its operation. The LCD display also has a 4 button user interface that allows the user to navigate the LCD menu and change settings such as the maximum operating speed of the unit, the dehumidistat setting, as well as access the unit’s built in override mode. The following sections explain how to navigate the LCD menu and change the settings, as well as how to access the override mode.
Entering the Main Menu
To change any settings for the HCS, you must first enter the main menu. To do so simply press the up arrow and cancel button at the same time.
Once inside the main menu, the arrows keys can be used to cycle through the relative humidity menu, override menu and fan speed menu. The blinking icon will allow you to know which section you’re looking at (Red icons are blinking icons).
To select one of these menus, press the Ok button. To return to the main screen press the cancel button.
Relative Humidity Menu
Once the relative humidity menu has been selected, the screen will change in order to allow the user to change the desired humidity level. Using the arrows keys will allow you to increase or decrease the desired RH value in increments of 5%. To accept a new value, select OK Button or the Cancel button to return to the main menu. If the wrong level is entered, repeat this procedure.
** Recommended humidity level for summer season is 55% and 45% for the winter season. Please note this does not show current humidity level, but rather the desired humidity level.
Override Timer Menu
The override function allows you to provide maximum ventilation for a predetermined amount of time, regardless of the fan speed chosen by the computerized/sensor control, to alleviate certain conditions such as fumes from new paint, flooring, furniture or excess moisture from hot showers, cooking, etc. To set an override timer, the override menu must be selected. Once this is done the following screen will be displayed. Use the Up/Down Arrow Buttons to cycle through the different override timer options and once the desired override time is chosen, press the Ok Button to begin the override or the Cancel button to return to the main menu. If the wrong time is entered, repeat this procedure.
Changing Fan Speeds
To change the maximum fan speeds, simply select the fan speed menu from the main menu. Once the display has changed to the Fan speed menu screen, you can use the Up/Down Arrow Buttons to cycle through all of the different fan speeds and then you can select the speed by pressing the Ok Button or the Cancel button to return to the main menu. If the wrong speed is entered, repeat this procedure.
The solid bars will denote the actual speed at which the fan is operating, the arrow below denotes the maximum chosen setting.
** Please note the unit will not exceed the maximum user set fan speed, unless the override mode is running. The control will choose the proper fan speed depending on humidity, temperature and dew point conditions.
Return and Exchange Policy
Clairitech Innovations Inc. values its relationship with you and offers you the option to return most products you purchase directly from Clairitech Innovations Inc., as set forth in detail below.
Policy
Return period of 30 days for unused products and accessories:
Unless you have a separate agreement with Clairitech Innovations Inc., or subject to the provisions below, all equipment and accessories that have not been used, in new condition and in their original packaging may be returned to Clairitech Innovations Inc. within 30 days of the date of purchase for a refund of their purchase price, an equivalent credit note or the exchange of the product, less shipping and handling charges, resupply fee and applicable taxes, if already paid.
Return period of 15 days for defective or damaged products and accessories:
Requests for refund and/or exchange for defective or damaged merchandise can be made within 15 days of receipt of the merchandise. After 15 days, the manufacturer’s warranty applies.
Note: Any product returned to Clairitech Innovations Inc. without the prior permission of Clairitech Innovations Inc. will be considered an unauthorized return; the customer will not receive any refunds or credit notes for the product and Clairitech Innovations Inc. will not return the product to the customer.
Damaged products and accessories:
If you have received damaged items, please contact us by phone or email before destroying or discarding the product and/or packaging. Failure to comply could see your request denied.
Fees
Unless the product is defective or the return is a direct result of a Clairitech Innovations Inc., the refund or credit does not include any shipping and handling charges shown on your packing slip or invoice; you are responsible for those and for any damages incurred during the return shipment.
Procedure
-
Before returning a product, you must first obtain a Return Authorization Number from Clairitech Innovations Inc. Customer Service before the end of the applicable return period. Proof of purchase will also be required.
To contact Clairitech Innovations Inc. Customer Service, please call 1-888-533-1348 or Email Us
Any product returned to Clairitech Innovations Inc. without the prior approval of Clairitech
Innovations Inc. will be considered an unauthorized return; the customer will not receive any credit or refund for the product and Clairitech Innovations Inc. will not return the product to the customer. -
Pack the product in its original package
-
Insert all the documents received concerning the order to be returned. Remember to keep a copy of all the documents provided.
-
To obtain a full refund, the products must be returned in perfect condition, in their original packaging and with all documents, parts and accessories.
-
The return costs must be prepaid; we will not accept deliveries paid at the reception.
-
For your protection, we advise you to provide the shipping service
-
Five days after the date of issue of the return authorization number Clairitech Innovations Inc.
Customer Service, you must send the product to the following address:
ClairiTech Innovations Inc.
1095 ch. Ohio Service Rd
Boudreau Ouest, New Brunswick
E4P 6N4 – Canada
-
Upon receipt of your authorized and compliant return, Clairitech Innovations Inc will issue a
credit or refund equal to the purchase price paid, less shipping and handling charges, restocking
charges and applicable taxes subject to this policy. -
For assistance please call 1-888-533-1348 or Email Us
-
For any questions regarding warranty terms please call 1-888-533-1348 or Email Us
NO RETURNS ARE POSSIBLE AFTER 30 DAYS FOLLOWING THE DATE OF THE BILLING DATE.
CLAIRITECH INNOVATIONS SHALL NOT BE LIABLE FOR, OR ANY CHARGE OF, A CONSUMER ORDER ERROR.
References
- clairitech.com/register
- Humidity control and ventilation System - Humidex
- Humidity control and ventilation System - Humidex
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>