Lluria BS13,9 LED strip User Guide
- October 27, 2023
- LLURIA
Table of Contents
Lluria BS13,9 LED strip
Inside IP20 Basic 13,9W/m
Flexible LED strip with ideal for all types of installations, general and
accent lighting. Great uniformity is achieved thanks to the small separation
between the LEDs.
For indoor use. 
Technical data
|
---|---
Power| 13,9W/m
Roll power 5m| 69,5W
IP| 20
Voltage| 24V
LED type| 2835
LEDs/m| 180
Pitch| 5,55mm
Beam angle| 120º
Min. cutting lenght| 33,3mm
Roll length| 5/30m
Life time| 50.000h
Ambient temperature| -20~50ºC
Storage temperature| -40~80ºC
Tc Point mark| Sí Yes (1)
Warranty years| 3
Dimmable| Sí Yes
Needs heatsink| Sí Yes
Max. lenght 20m (2)
- (UNE-EN 60598-1:2015; UNE-EN 60598-2-1:1993)
- Connected in series
5 MacAdam steps CDL
Dimensions
Circuit diagram
Respect the maximum lengths to avoid drops voltage and variations in light
intensity.
Cable section
Distance ≤ 5m < 15m < 25m
Section 0,50mm2 1,5mm2 2,5mm2
Distance LED – Profile
Minimum distance that should be left at the ends, both sides, between LED
strip and profile.
Assembly detail
Do not bend de LED strip to adapt them to sharp radius or angle, cut for the
cut mark and weld a section of cable to make the turn.
Life time
The life time of our LEDs is 50.000h at an ambient temperature of 23ºC and
provided with a heat dissipation system. Off cycles are recommended to extend
the life of the LEDs.
Warnings
- To ensure the life of the LED, it is request to place on a surface that dissipates the heat they generate.
- Caution when handling cables to avoid damage to the welds.
- The voltage surges can cause damage.
- If diffuser is used with the dissipating profile, there may be variations in the color temperature.
Lluria reserves the right to modify specifications.