LLURIA BS19-2 LED Strip Instructions
- June 22, 2024
- LLURIA
Table of Contents
LLURIA BS19-2 LED Strip
OVERVIEW
Flexible LED strip with ideal for all types of installations, general and
accent lighting. Great uniformity is achieved thanks to the small separation
between the LEDs. For indoor use.
Technical data
- Power
- 19,2W/m
- Roll power 5m
- 96W
- IP 20
- CRI >90
- R9 >25
- Voltage
- 24V
- LED type
- 2835
- LEDs/m
- 240
- Pitch
- 4,17mm
- Beam angle
- 120º
- Min. cutting lenght
- 25mm
- Roll length
- 5/30m
- Life time
- 50.000h
- Ambient temperature
- -20~50ºC
- Storage temperature
- -40~80ºC
- Warranty years
- 4
- Dimmable
- Yes
- Needs heatsink
- Yes
- Max. lenght
- 10m (1)
Conectadas en serie Connected in series
- Lluria reserves the right to modify specifications.
Dimensions
Circuit diagram
Respect the maximum lengths to avoid drops voltage and variations in light
intensity.
Cable section
Distance LED – Profile
Minimum distance that should be left at the ends, both sides, between LED strip and profile.
Assembly detail
Do not bend de LED strip to adapt them to sharp radius or angle, cut for the cut mark and weld a section of cable to make the turn.
Lifetime
The lifetime of our LEDs is 50.000h at an ambient temperature of 23ºC and
provided with a heat dissipation system. Off cycles are recommended to extend
the life of the LEDs.
Warnings
- To ensure the life of the LED, it is requested to be placed on a surface that dissipates the heat it generates.
- Caution when handling cables to avoid damage to the welds.
- The voltage surges can cause damage.
- If the diffuser is used with the dissipating profile, there may be variations in the color temperature.