CLEANFORCE CP-RAINBOW Air Purifier User Manual
- June 4, 2024
- CLEANFORCE
Table of Contents
- Important Safety Instructions
- FCC Warning
- Product Introduction
- Accessories
- LED Display
- Specifications
- Operating Instructions
- Smart App
- Link To Smart Home Hub
- Multi-Integrated Filter Instruction
- Replace The Filter
- Care and Maintenance
- Troubleshooting
- Warranty Card
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Air Purifier
USER MANUAL
ClenForce Rainbow
Thank you very much for choosing the CleanForce air purifier. Before using the
product, please take a few minutes to read the user manual carefully.
This will help you to better understand the product functions and simple
operation mode.
Important Safety Instructions
Read all instructions before using this air purifier to reduce any risk of fire, electric shock, or injury. To ensure safety, store these instructions for future use and make them accessible to other users. Make sure to include these instructions when handing over the air purifier to third parties.
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- This air purifier is intended for household and commercial use, not for industrial use. Do not use this air purifier as sole protection against harmful pollutants.
- Do not use this air purifier if you have restricted physical, sensory, or mental skills, or a lack of experience or knowledge unless supervised or instructed by a person who is familiar with the device.
- Children should not touch or operate the device and should be supervised at all times when the purifier is in use.
- Do not use the air purifier in an area with toxic/explosive vapors/ liquids, oxygen tanks or near flammable, combustible materials.
- Place purifier in a location whereby air can circulate freely in, out, and around the unit. Do not block the air inlets and outlets of the air purifier.
- Ensure the air purifier is positioned on a flat, stable, solid surface. Completely unravel the power cord prior to use. Never overstretch the power cord. Do not place air purifiers near heat sources such as stove tops, or ovens.
- Do not place the air purifier near wet areas, like a bathroom.
- To ensure safety with the power cord. The power cord should not run under rugs, runners or carpets as it can be a trip hazard. Don’t pull, carry or trap the power cord under doors or sharp edges. Do not unplug the air purifier by pulling on the power cord.
- Don’t handle the plug or air purifier with wet hands.
- Don’t use the air purifier with incorrect voltage as this may result in damage or injury to the user. The correct voltage is listed on the rating label.
- Before disconnecting or connecting the power cord, ensure the unit are switched off.
- Always switch off and unplug the air purifier before performing maintenance or troubleshooting checks.
- Always unplug the power cord before adding or removing parts and before cleaning.
- Don’t use the air purifier if the power cord or plug is damaged. Please contact our Customer Service.
- Only specialist personnel may perform repairs on electrical devices. Improper repairs may subject users to a considerable danger. In the case of repairs, please contact our customer service.
FCC Warning
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body. Use only the supplied antenna.
Product Introduction
- Touch Button
- Inlets
- Sensor
- Body
- Wheels
- Filter Cover
- LED Display
- Outlets
- Power Cord
Accessories
LED Display
- LED Display
- Particle value display
- Three Fan Speed
- Filter Service Life
- Child Lock Mode ON
- Sleep Mode ON
- Filter Life Indicator
- WiFi Indicator
- Automatic Mode ON
Specifications
Air Purifier Part No.: CP-Rainbow
Multi-Integrated Filter Part No.: CF-Rainbow
Clean Air Delivery:
Rate(CADR)| Smoke| Dust| Pollen|
---|---|---|---|---
>330| >330| >330| ft/min
550| >550| >550| m°*/h
Power: 47W
Noise Level: 34-60dB
Motor Type: DC Motor
Voltage: 120V 60Hz
Filter service life: ©3600 hours
Dimensions: Width: 287mm ( 11.3 inches)
Depth: 287mm (11.3 inches)
Height: 648mm (25.5 inches)
Weight: 6.4KG (14.1 Ibs)
Operating Instructions
Read all instructions before using your CleanForce air purifier.
Unpack and remove all packing material. Remove your CleanForce air purifier
from the plastic bag.
Completely unravel the power cord and place your CleanForce air purifier on a
flat, dry, stable surface. Be sure to place your CleanForce air purifier at
least 12 inches(30cm) away from the wall on ALL sides. The air output vent
should face towards the room – failure to do so may reduce unit efficiency.
Inspect the power cord for signs of damage before use.
DO NOT USE IT IF THE CORD IS DAMAGED
Note: To ensure the normal operation of the air purifier, please remove
the plastic bag from the internal filter before starting the machine!
The steps are as follows:
|
---|---
Turn off and unplug the air purifier.| Pull the rear handle to take out the
filter cover.
|
Take out the Multi-Integrated Filter.| Remove all the plastic outer packages.
|
Install the Multi-Integrated Filter.| Install the filter cover back, plug in
and press the power key.
Plug in your CleanForce air purifier and press the power key to turn the unit
on. Next, the machine will start the automatic mode, and the LED lights on top
of the air purifier will display the air quality in three colors. You can also
use the Smart App to operate your air purifier.
- Power
- Timer
- Fan Speed
- Sleep Mode
- Filter Reset
- Child Lock
- WiFi Indicator
- LED Light
Power Key
Press the power key, the machine will start the automatic mode.
Press it again, the machine will enter standby mode.
Timer Key
The user can set the running time of the air purifier, 1-12 hours
automatically on / off. Press the Timer key once to operate the unit for 1
hour, press the Timer key twice to indicate that the unit should operate for 2
hours, and soon. The maximum time that can be set is 12 hours. When the timer
runs out, the air purifier will shut down and enter standby mode.
Fan Speed Key
Touch the “Speed” key to enter the manual fan speed adjustment mode. The fan
speed switches between levels 1-3 and auto mode.
Sleep Mode Key
Press the Sleep key, the light on the touch screen panel will be dimmed, the
air purifier will enter the mute mode operation, and the LED display will go
out. Press the sleep key again to cancel the sleep mode.
Filter Reset Key
The indicator light for the Filter Reset key will flash at the end of the
filter service life, to remind the customer to replace the filter.
Once the filter has been replaced, long-press the Filter Reset key for more
than 5 seconds until the flashing light goes out.
Child Lock Key
Press the lock key to enter the lock mode, other keys are invalid in this
mode. Long-press the lock key (more than 3 seconds), to exit the lock mode,
this will allow other keys to then operate normally.
WiFi Networking
Long press the WiFi key to enter the network matching mode.
See the details on the next page: section “Smart App”.
Smart App
Scan the QR code to download and install the ClearForce App, register an
account.
Link the air purifier to the network for the first time
https://a.smart321.com/cleanforcesmart
- Open the CleanForce App, Click the “+” button on the right top, then click your air purifier model, select your WiFi network and enter the password.
- Long press the “WiFi” button for 3s, and the indicator light will rapidly.
- select “Finish network configuration” on the app and click “next”.
The smart app starts finding the device and adding it to the device list.
After successfully linked to the network, the WiFi indicator stops flashing
and stays ON.
If it fails to link to the network for a long time, the WiFi indicator goes
out, and the device stops pairing with the network.
If you want to relink the network, press the WiFi key again to repeat the
network configuration operation.
After configuring the network and binding the device according to the
instructions, you can use the smart app to control your device.
Link To Smart Home Hub
This device support Alexa Echo, The method is as follows:
After linking the device to the WiFi network through CleanForce App, do the
following steps to connect the device to the smart speaker. Smart speaker Apps
may change the actions, these are for reference only.
Alexa Echo:
Completed the Alexa Echo’s configuration process first, then following the
next steps:
Open Alexa App, tap on “Skills” in the Alexa app menu, then search for “Tuya
Smart”. Tap “Enable” to enable the Skill. Enter the CleanForce App account and
password, then tap “Link Now” to link your TuyaSmart account to enable the
Skill. Now you can start your smart home journey.
Multi-Integrated Filter Instruction
General information
CleanForce Rainbow air purifier Contains 1 pcs of Multi-Integrated filter.
The Multi-Integrated filter is composed of antibacterial non-woven cloth, HEPA filter, and activated carbon, it removes:
Replace The Filter
When the indicator light of the filter service life flashes, the filters need to be replaced.
- Turn off the air purifier and unplug it.
- Pull the rear handle to take the filter cover.
- Take out the used Multi-Integrated Filter
Remove ail the plastic outer packages of the new filter| Install the new
Multi-integrated Filters
install the filter cover back.| Plug in the air purifier, Press the filter key more than 3 seconds
Note:
- You should not miss this reset step or the air purifier may not operate normally.
- The plastic pre-filter does nat need to be replaced if there is no damage. tt only needs to be regularly cleaned and dried then put back into the machine,
Care and Maintenance
Please follow the steps below for regular maintenance for your air purifier to
workat optimum capacity.
Before any maintenance operation, be sure to turn off the machine
through the power key and unplug the device.
Filter Cover (Air Inlets)
Remove the covers on both sides of the machine, and clean them regularly with
water or vacuum cleaner.
Fan
Regularly clean the fan port with a vacuum cleaner. Do not wash with water or
dismantle the fan.
Sensor
Remove the filter cover and wipe the sensor surface regularly with a dry
cotton rod.
Recommend to replace the Multi-Integrated filters every 6-12 months; Calculate
based on the fan speed of medium grade, which uses 8 hours every day. The
replacement frequency depends on the use duration and working environment.
When the filter needs replacing, the filter indicator light will flash.
Attention! When your air purifier stops working, please check the filters.
When the filter life bar decreases to the last grid and flashes, indicating
that the filters need replacing.
Tips
If you are allergic or suffering from asthma, please avoid touching the used
filter.
Please wear gloves when replacing the filter, or wash your hands after
replacement.
Put the used filter into a sealed bag to avoid the diffusion of pollutants.
Troubleshooting
| Problem | Check | Solution |
|---|---|---|
| The unit does not turn on | Power socket |
Power cord
power failure
Covers on both sides of the unit| Check whether the power socket is damaged
Contact customer to change the power cord
Available after the power supply is restored
If the filter cover does not install correctly, please reinstall it.
The air outlet does not produce air| Plastic outer filter packaging has been
removed
Whether the air outlet at top of the air purifier is blocked| Make sure that
all the plastic outer packages of the filter have been removed.
Clean the air outlet.
The unit does not work after replacing the filters.| Follow the reset step
after filter replacement| Long-press the filter reset key more than 3 seconds
until the flashing light goes out.
Reset the filter with CleanForce App.
Air purification capacity is decreasing| Check whether the Multi-Integrated
filter is blocked Check air inlet or outlet is blocked| Change the Multi-
Integrated filter regularly. Clean air inlet or outlet.
Auto function does not work| Check that sensor is dust free| Clean the dust
from the sensor.
If the above methods do not solve the problem, or there air other problems with the unit, please unplug the unit and contact us.
Warranty Policy
Dear User,
If you encounter problems with your air purifier, or your expectations for
your CleanForce product are not met, you can contact us using either of the
following methods:
Call our service hotline: +1 213 289 3385
Or contact us by email:
support@cleanforceair.com
Your CleanForce air purifier is guaranteed and warranted against defects in
material and workmanship, under normal residential use, for up to 2-years from
the date of purchase. (excluding filters),
Warranty| Proof-of-purchase and warranty card from CleanForce The policy
must be provided,
Claims must be made within the warranty period,Cause of failure must not be a
result of user error,
---|---
Not covered warranty| Not covered °¢ Failure to operate, maintain or use the
product in accordance
warranty with the user manual.
Lack of proof-of-purchase, warranty card.
The warranty card model does not correspond with the machine.
Product damage caused by force majeure.Damage caused by unstable voltage power
and/or power source used does not comply with the national electric safety
standards (AC 120V, 60HZ).
Damage caused by improper transport, installation, use, maintenance or storage
by users.
Warranty Card
Product Name/Mode| Rainbow Air Purifier|
---|---|---
Date of Purchase| |
Where Purchased| |
Order Number| |
Customer Name| |
Address| |
Phone Number| |
Email| |
| |
| |
| |
| |
| |
CleanForce Air
6191 Schaefer Ave
Chino, CA, 91710
Tek +1 213 289 3385
Web: www.cleanforceair.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>