KFI PRODUCTS 105740 Honda Pioneer 1000 Instructions
- July 27, 2024
- KFi PRODUCTS
Table of Contents
HondA PIoneeR 1000
Plow Mount
PART #105740
Instructions
Kit Components:
| Item # | Qty. | Description |
|---|---|---|
| 1 | 1 | Plow Mount |
| 2 | 1 | Hardware Kit HK-321 |
| 2.1 | 4 | M10-1.25 X 30 HEX BOLT GR8. |
| 2.2 | 4 | M10 LOCK WASHER ZINC |
| 2.3 | 4 | M10 FLAT WASHER ZINC |
| 2.4 | 1 | 3/8”-16 X .75 HEX BOLT GR5 |
| 2.5 | 1 | 3/8”-16 HEX NUT FLANGE NYLOCK GR5 |
Note: 3/8” Hardware Not Used
INSTALLATION INSTRUCTIONS
Note: Make sure all hardware needed to complete this mount is in the package. Thoroughly read through and understand the instructions before installing.
- Locate the four factory threaded holes (A) on the bottom of the front of your machine. (see Figures 2 & 3).
| 
---|--- - Align your mount to the holes and insert the M10 hardware supplied with your mount (see Figure 1)
- Once all hardware is started, tighten hardware evenly. (see Figure 4).
- See UTV Plow Tube System instruction manual for tube attachment.
©2024
Copyright Kappers Fabricating, Inc.
All rights reserved
Documents / Resources
| KFI
PRODUCTS 105740 Honda Pioneer
1000
[pdf] Instructions
PART 105740, 105740 Honda Pioneer 1000, 105740, Honda Pioneer 1000, Pioneer
1000
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>