Telran 500257 4K 200M HDMI KVM Extender over User Manual

Telran 500257 4K 200M HDMI KVM Extender over

Specifications

• Model: 4K 200M HDMI KVM Extender over IP, H.265
• Transmission Distance: Up to 200 meters
• Network Standard: TCP/IP, 802.3 Ethernet
• Audio/Video Support: HDMI, H.265
• Control Support: IR remote control, USB mouse and keyboard
• Additional Features: RS232 support, plug-and-play design

Product Usage Instructions

Connection and Operation

1. Connect the HDMI source (e.g., DVD, PS3, STB) to the HDMI IN port of the transmitter using an HDMI cable.
2. Connect the HDMI output of the Receiver to the HDTV display using an HDMI cable.
3. Connect the Transmitter and Receiver with one CAT5e/6 cable (recommended maximum distance is 200M).
4. Connect the IR receiver into the IR-RX port on the receiver and the IR transmitter into the IR-TX on the transmitter, ensuring proper alignment.
5. Plug the mouse and keyboard into the USB port of the receiver.
   • Connect the USB port of the transmitter to the computer for KVM control.
6. Connect the 5V power supply to both the transmitter and receiver.
   • The power light should be on; the status light should flash for normal operation.
7. Multipoint to multipoint setup: Pair and connect multiple TX and RX units through the web browser settings when connected to a switch.

Applications

The HDMI 200M extender over IP is suitable for use in various applications including:

• Audio-visual conference
• Command and control center
• Ticketing platform
• Home theater
• Multi-media teaching
• Conference systems

Frequently Asked Questions

Q: How do I reset the IP address if forgotten?

A: Use a needle to insert into the reset keyhole as instructed in the manual.

Q: Can I use multiple transmitters and receivers simultaneously?

A: Yes, multipoint-to-multipoint mode allows for pairing and connecting multiple units via a switch and web browser settings.

Introduction

• HDMI 200M Extender over IP is based on TCP/IP standard. It transmits your HO display with a high resolution up to 200 meters away from your DVD or computer source by using one CAT5e/6 cable.
• At the same time, it’s convenient to transmit HOMI audio and video sources in point-to-point mode, multipoint-to-multipoint, and cascade connection mode.

Features

• Support point-to-point mode, multipoint-to-multipoint mode;
• Support RS232
• 802.3 Ethernet standard
• Support IR remote control
• Support USB mouse and keyboard extension
• The design of pure hardware, plug and play, no need for additional software

Specifications

• Resolutions: 480p, 720p, 1080p, 4K/30Hz
• Audio: Sample rate:32kHz, 44.1kHz and 48kHz code
• IR remote control: 38 KHz (NEC)
• Power adapter format: Input AC (50HZ, 60HZ) 100V-240V; output: DC5V/1A The max working current: TX 650mA, RX 450mA
• Size(L-W-H): 122x84x19mm
• Weight: 180g x 2
• Operating Temperature/Humidity: 0°C-45°C/10%-80%RH(no condensation)
• Storage Temperature/Humidity: -10°C-70°C/5%-90%RH(no condensation)

Physical interface diagram

1. Reset keyhole
2. HDMI In — HDMI Input port
3. Loop out — HDMI Loop Output port
4. Ethernet — Network port
5. DC/5V — Power port
6. IR-TX — IR extension port
7. RS232 — RS232 port
8. USB-PC — USB port, Connect to PC
9. HDMI Out — HDMI Output port
10. IR-RX — IR extension port
11. Keyboard/Mouse — mouse/keyboard input

Note: When forget the IP address, you can use the needle to insert the hole of the reset key, and keep pressing for 3 seconds to restore the original setting IP.

Application diagrams

Point-to-point application

Multipoint to multipoint application

Connection and operation

1. Connect the HDMI source (such as DVD, PS3, STB) to the “HDMI IN” of the transmitter by HDMI cable.
2. Connect the “HDMI out” of the Receiver to the HDTV display by HDMI cable.
3. Connect the Transmitter and Receiver with one cat5e/6 cable (recommend) the furthest distance is 200M.
4. Connect the”1R receiver” to the “IR-RX” port on the receiver, and the “IR transmitter” to the IR-TX” on the transmitter, and make sure the IR transmitter aims at the IR port of the source.
5. Plug the mouse and keyboard into the USB port of the receiver, and connect the USB port of the transmitter to the computer if you need the KVM control function.
6. Connect two pieces of 5V power supply to the transmitter and receiver, at this time, the power light of the extender is on; and when the status light is on and flashing, the device starts normally.
7. Multipoint to multipoint match setting: when many TX and many RX connect to the switch, the IP extender can be paired and connected according to the settings of the Web browser.

Application diagrams

HDMI 200M extender over IP is used in audio-visual conferences, command and control centers, ticketing platforms, home theaters, multi-media teaching, conference systems, and so on.

The Package contents

1. Transmitter 1PC
2. Receiver 1PC
3. 5V Power adapter 2PCS
4. IR cable 1Pair
5. User’s Manual 1PC
6. USB cable male to male 1PC

• *19 Hayezira St. Industrial Zone Ramla 7255616 Technical support 2023**
• www.telran.co.il
• office@telran.co.il
• fax. 03-5214524
• phone: 03-5575110

Documents / Resources

| Telran 500257 4K 200M HDMI KVM Extender over [pdf] User Manual
500257 4K 200M HDMI KVM Extender over, 500257, 4K 200M HDMI KVM Extender over, KVM Extender over, Extender over, over
---|---

References

• Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>