TELRAN COMMUNICATION 909904 G.hn Wave 2 Adapter User Manual

: June 3, 2024
: TELRAN COMMUNICATION

Table of Contents

TELRAN COMMUNICATION 909904 G.hn Wave 2 Adapter
Package Contents
Features
Requirements
Connecting the Adapters
Connecting Additional Adapters
Web Management
Specifications
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

TELRAN COMMUNICATION 909904 G.hn Wave 2 Adapter

TELRAN-COMMUNICATION-909904-G-hn-Wave-2-Adapter-
product

Package Contents

G.hn Wave-2 Adapter
Coaxial cable
Power adapter
Quick Start Guide
Ethernet cable

Features

Ethernet port(gigabit)
COM(Coax In) coaxial port
TV(TV/STB Out)coaxial port

Requirements

Available coaxial port in installation areas
Available electrical wall socket in installation areas
Power, COAX, Ethernet LEDs:
- Power LED: glows solid green when Adapter is powered up.
- COAX LED: blinks when Cable is connected.
- Ethernet LED: blinks when data is transferred across port.

Connecting the Adapters

Connecting the Adapter is a relatively simple process. First, connect one Adapter to the TV or set-top box, the broadband modem or router, and the coaxial network to establish the Internet signal. Then, additional Adapters can be installed throughout the home or office at any location Ethernet Internet access is needed, and an available coaxial port is available.
Connecting the First Adapter
The first Adapter must be connected to the TV or set-top box, the broad band modem or router, and the coaxial network. This Adapter takes the Internet signal from the modem/router and delivers it to the coaxial network, while keeping the TV/set-top box connected.
To connect the first Adapter:

Remove the end of the coaxial cable connected to the TV or set-top box from its coaxial wall port.
Connect the end of the coaxial cable removed in step 1 to the TV coaxial port on the side of the Adapter
Connect another coaxial cable into the coaxial wall port left unconnected in step 1.
Connect the other end of the coaxial cable installed in step 3 to the COM coaxial port on the side of the Adapter.
Connect one end of an Ethernet cable to the Ethernet port of the modem/router.
Connect the other end of the Ethernet cable to the Ethernet port on the side of the Adapter.
Plug the provided power adapter into the Power port on the side of the Adapter.
Plug the other end of the power adapter (external) into an electrical outlet.
When complete, the setup should look similar to the figure below:

The Internet signal is now being delivered across the coaxial network.

Connecting Additional Adapters

If necessary, additional Adapter scan be placed at locations around the home or office that need an Ethernet Internet connection, but currently only have a coaxial port.
To connect additional Adapters:

Find a coaxial wall port near the desired location and unplug the coaxial cable connected to the TV or set-top box. If no device is plugged into this coaxial wall port, skip to step 3.
Connect the end of the coaxial cable removed in step 1 to the TV coaxial port on the side of the Adapter.
Connect a coaxial cable into the coaxial wall port indicated in step 1.
Connect the other end of the coaxial cable installed in step 3 to the COM port on the side of the Adapter.
Connect one end of an Ethernet cable into the Ethernet port of the device to connect to the Internet.
Connect the other end of the Ethernet cable into the Ethernet port on the side of the Adapter.
Plug the provided power adapter into the Power port on the side of the Adapter.
Plug the other end of the power adapter (external) into an electrical outlet.
Make sure the Power, Ethernet and Coax lights are solid green.
When complete, the setup should look similar to the figure below:

The device connected to the Ethernet port is now connected to the Internet via the coaxial network. Repeat this process to install additional Adapters throughout the home.

Web Management

Each adapter has a web interface for management. You can visit the website to inquire, manage and upgrade.
The default IP address of the adapter is 192.168.100.1. To connect to a given adapter, make sure the IP address of your computer is 192.168.100.x (2-254) and connect provided Ethernet cable between your computer and the LAN port of the adapter.
Enter http://192.168.100.1 into your web browser direction setting. You can log in from a web page and set some configurations such as frequency range modification, transmission rate option, IP address configuration, and Ethernet information.

Default connection values are: IP address 192.168.100.1 Password admin

Specifications

LAN Connections G.hn Frequency Range -:2MHz~200MHz
TV Frequency Range -:240MHz~1002MHz
LED Indicators POWER, ETHERNET, COAX
Power External, 12VDC, 0.5A
Environmental Ambient temperature -0ºCto40ºC (32ºFto104ºF)
Storage temperature –20ºCto85ºC (-4ºFto185ºF) Operating humidity -10%to85% non-condensing Storage humidity -5%to90% non-condensing