Telran 500260 4K 60Hz HDMI Matrix 2×2 with Audio Instruction Manual

p.n. 500260
4K 60Hz HDMI Matrix 2×2 with audio

USER MANUAL

Introduction

The HDMI matrix 2×2 can connect 2 HD signal sources to 2 HD display terminals with optical fiber and stereo headphone output at the same time via HDMI out 1 port. The matrix allows four HDMI devices to be switched or split easily to four HDMI compatible monitors or projectors.
This HDMI matrix support lossless transmitting and are widely used in space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

Features

• Support 3D video format
• Via HDMI out1, support 3.5mm earphone jack and optical output at same time
• 2 HDMI inputs switch and split to 2 HDMI displays
• Support LPCM/Dolby/DTS 5.1 channel

Specifications

HDMI resolutions: up to 3840*2160/60Hz
Support video format: 8/10/12 bit deep color
Support audio format: LPCM/DTS/Dolby-AC3
Max bandwidth: 600MHz
Max baud rate: 3x6Gbps
Input cable distance: 4K/30Hz ≤15M AWG26 HDMI standard cable
4K/60Hz ≤5M HDMI 2.0 standard cable
Output cable distance: 4K/30Hz ≤15M AWG26 HDMI standard cable
4K/60Hz ≤5M HDMI 2.0 standard cable
Max working current: 700mA
Power adapter format: Input: AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1.5A
Operating Temperature range: -15 to +45℃
Operating Humidity range: 5 to 90%RH (No Condensation)
Dimension (L x W x H): 122x80x19 (mm)
Weight: 174g

Function Interface Figure

1. HDMI In1/2 — HDMI Input
2. HDMI Out1/2 — HDMI output
3. EDID — EDID management
4. DC/5V — 5V power supply
5. Key1/2 — HDMI Video output switching button
6. R/L — Stereo output| 7. IR —IR receive
8. Optical — Optical output
9. Power — Power indicator
10. Out1/In1/2 — HDMI Out1 signal input indicator light
11. Out2/In1/2 — HDMI Out2 signal input indicator light
---|---

EDID setting

Noted: the dial switch to dial downward is 1, dial upward is 0

The Remote Control instruction:

1. The four buttons on Output 1 is the corresponding input source In1/In2 which out from Output 1,1n1/In2 can be switched freely.
2. The four buttons on Output 2 is the corresponding input source In1/In2 which out from Output 2, In1/In2 can be switched freely.

Instruction of Buttons and LED:

1. Instruction of LED: In1-In2 indicator is the corresponding input sources out from Output 1 or Output 2.
2. Operation of Buttons: Key1 or Key2 is used to switched the corresponding input source out from Output 1 or Output 2.

Connection Diagram:

Connection and operation:

1. Connect each HDMI source devices and input of HDMI Matrix with HDMI cable.
2. Connect display devices and output of HDMI Matrix with HDMI cable.
3. Connect the audio output to the stereo amplifier via stereo headphones or optical fiber.
4. Connect 5V power supply to the HDMI 2×2 Matrix.
5. Use the IR remote or button control to switch the signal source freely.

NOTE: HDMI port and audio ports are connected according to user needs, not every be connected; but not reversed.

Application scenario

Notes:
Pls use the machine as the instruction listed to keep the long use lifetime of the machine.

1. The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
2. All parts will be free from the strong shake, hit, fall.
3. Touching the power adaptor with the wet hands is prohibited.
4. Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
5. Pls turn the power off when the machine is not used for long time.
6. Pls do not open the cover and do not touch the inside parts.
7. Pls use the original factory power adaptor.

Accessories:

1. HDMI Matrix 2×2
2. IR Remote Control| 1PC
1PC| 3. 5V power adapter
4. User Manual| 1PC
1PC
---|---|---|---

*Technical support 2023**
19 Hayezira St. Industrial Zone Ramla 7255616
www.telran.co.il | [email protected] | fax. 03-5214524 | phone: 03-5575110

References

• Home

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>