STARLINK 050724 Flat High Performance Kit User Guide

STARLINK 050724 Flat High Performance Kit

Product Specifications

• Starlink Cable Length: 25 m (82 ft)
• Ethernet Cable Length: 5 m (16.5 ft)
• AC Cable Length: 1.8 m (6 ft)

Product Usage Instructions

Download the Starlink App

• Scan the QR code in the manual to download the Starlink App.

Mounting Location

• Ensure the mounting location has a clear view of the sky to stay connected with satellites. Use the obstruction tool in the App to select a suitable location.

Mark and Drill Pilot Holes

• Mark the location of the four holes on the Wedge Mount and drill them using a 6.5 mm drill bit. Remove burrs and debris around the holes.

Install Mobility Mount

• Place rubber washers over holes, install the mount, apply silicone sealant on the threads, and insert screws through the mount and holes. Secure the mount using a washer and nut on each screw. Tighten using a 7/16 socket and wrench.

Install Shoulder Bolt

• Use a 5/32 hex key to tighten shoulder bolts near the cable port.

Lock Starlink onto Mount

• Align shoulder bolts into the mount keyway, push down, and slide Starlink forward to lock into place. Fully tighten shoulder bolts.

Secure Starlink

• Wet threads of the 12.7 mm socket head bolts with thread locker, install into remaining holes and tighten using a 3/16 hex key.

Connect and Align Starlink

• Connect the Starlink cable to the port on the bottom of Starlink and follow the installation process on the Starlink App or your router’s setup instructions.

Frequently Asked Questions

Q: How do I ensure a stable connection?

A: Select a mounting location with a clear view of the sky, away from obstructions like trees or buildings.

Q: What tools are required for installation?

A: You will need a drill or impact driver, drill bits, pencil, socket wrenches, hex keys, and screwdrivers as per the recommended tools list in the manual.

What’s In The Box

Recommended Tools

INSTALL

1. Download the Starlink App
   • Scan the QR code to download the Starlink App.
2. Mounting Location
   • Your Starlink needs a clear view of the sky so it can stay connected with satellites as they move overhead. Objects that obstruct the connection between your Starlink and the satellite, such as a tree branch, pole, or roof, will cause service interruptions.
   • Use the obstruction tool in the App to ensure you have selected a suitable mounting location.
3. Mark the Pilot Holes
   • Mark the location of the four holes on your Wedge Mount using a pen or pencil.
   • The included machine screws can accommodate mounting surfaces up to 11.44 mm (0.3 in) thick.
4. Drill the Pilot Holes
   • Drill the holes with a 6.5 mm (0.25 in) drill bit.
   • Remove burrs around holes and make sure the surface is free of debris.
5. Apply Sealant and Screw in Mobility Mount
   • Place rubber washers over holes followed by mount. Install a washer on each of the four machine screws, liberally apply silicone sealant on the threads, and insert screws through mount and pre-drilled holes.
   • Install a washer and nut on the end of each machine screw and secure mount to the surface. Use a 7/16 in socket and wrench to tighten screws to snug plus 1/4 turn. Do not overtighten.
6. Install Shoulder Bolt
   • Install shoulder bolts into threaded holes near the cable port. Use a 5/32 in hex key to tighten bolts to hand tight.
7. Lock Starlink onto Mount
   • Align shoulder bolts into the keyway on the bottom of the mount. Push down and slide Starlink forward to lock into place.
   • Once secured, fully tighten the shoulder bolts.
8. Secure Starlink
   • Wet threads of the 12.7 mm (0.5 in) socket head bolts with thread locker and install them into the two remaining holes to secure Starlink. Use the 3/16 in hex key to tighten screws to snug plus 1/4 turn. Do not over-tighten.
   • Ensure you are using the 12.7 mm (0.5 in) length bolts. Longer bolts can damage Starlink.
9. Connect and Align Starlink
   • Plug the Starlink cable into the port on the bottom of the Starlink.
   • If you have a Starlink router, step through the Starlink install process on the Starlink App. If you have a compatible third-party router, follow the router’s setup instructions.

POWER SUPPLY MOUNT INSTALL

1. Mark Pilot Holes
   • Remove the power supply from its mount and select a mount location no more than 1.8 m (6ft) away from your power source.
   • Mark the location of the two holes on your Power Supply Mount using a pen or pencil.
2. Drill the Pilot Holes
   • Drill the holes with an 8 mm (5/16 in) drill bit.
3. Install Anchors and Mount
   • Push anchors into holes until flush with the wall.
   • Place the wall mount over the anchors and screw the mount into the wall until securely attached.
4. Plug In Cables and Power Supply
   • Plug the Starlink, AC, and Ethernet cables into the power supply. Slide the power supply into the mount, making sure the top clip snaps into place.
   • Finish installation by routing the Ethernet cable to your router install location, connect to the router, and plug in the router and power supply into your power source.

support.starlink.com

Documents / Resources

| STARLINK 050724 Flat High Performance Kit [pdf] User Guide
050724 Flat High Performance Kit, 050724, Flat High Performance Kit, High Performance Kit, Performance Kit, Kit
---|---

References

• Help Center

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>