legrand TruTile AUTT Acoustic Wall Panel User Guide
- July 23, 2024
- Legrand
Table of Contents
legrand TruTile AUTT Acoustic Wall Panel
BEFORE YOU BEGIN
- The contractor is responsible for adequately reinforcing and preparing walls and/or ceilings for product installation.
- Focal Point, LLC accepts no responsibility for inadequately reinforcing and preparing walls and/or ceilings.
- The information contained in this drawing is the sole property of Focal Point, LLC. Any reproduction in part or whole without the written permission of Focal Point, LLC is prohibited.
INSTRUCTION KEY
COMPONENT KEY
FOCAL POINT
Square Tiles
- TILES CAN BE TRIMMED TO SIZE WITH A UTILITY KNIFE OR TABLE SAW.
- CONSTRUCTION ADHESIVE OR DOUBLE-SIDED TAPE RECOMMENDED FOR TILE INSTALLATION.
- SEE THE ADHESIVE MANUFACTURER’S INSTRUCTIONS FOR SURFACE PREPARATION RECOMMENDATIONS.
HOW TO APPLY
-
ARROW ON BACK OF TILE INDICATES THE PRIMARY TILE ORIENTATION.
-
(OPTIONAL) USE ARROWS TO GUIDE TILE ROTATION TO CREATE DESIRED PATTERN.
WIDE RULE & WIDE ARC NEW DECO HORIZONTAL PATTERN SHOWN FOR EXAMPLE. -
APPLY ADHESIVE TO THE BACK OF TILE SEE THE MANUFACTURER’S INSTRUCTIONS FOR ADHESIVE APPLICATION RECOMMENDATIONS.
-
CONSTRUCTION ADHESIVE
DO NOT APPLY ADHESIVE TOO CLOSE TO EDGES OF TILE TO PREVENT SQUEEZE-OUT. -
DOUBLE-SIDED TAPE
-
-
MOUNT TILE TO SURFACE.
-
APPLY PRESSURE TO AREAS WHERE ADHESIVE HAS BEEN APPLIED.
-
REPEAT STEPS 1-5 TO COMPLETE PATTERN.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>