JOYROOM JR-ZS291 Magnetic Wireless Car Charger Holder User Manual
- July 23, 2024
- Joyroom
Table of Contents
JOYROOM JR-ZS291 Magnetic Wireless Car Charger Holder
Magnetic Wireless Car Charger Holder
Parameters
- Model: JR-ZS291
- Name: Magnetic Wireless Car Charger Holder
- Material: ABS+PC
- Input: SV 2A 9V 2A 12V 2A
- Output: SW/7.SW/l0W/lSW (MAX)
- Input port: Type-C
- Applicable phone size: 4.7-6.7″
Indicator light
- Power on Crystal edge light turn on
- Standby Constant crystal edge light
- Charging Crystal edge light turns off
- FOD Flashing crystal edge light
Product diagram
Air vent clip hook
Operation steps
- Put the ball head into the nut first, then insert it into the socket on the back of the holder, tighten the nut clockwise.
- Loosen the knob and open the hook, insert the hook onto vent blade, then fasten the knob.
- Use the Type-C charging cable in the package to connect the holder and the car charger.
- Place your phone. It will be securely attached to the charger holder with its auto-alignment function.
Note:
The product will automatically hold and charge your iP 12/13 once sensing it.
If you don’t want to take off your phone case, we suggest using magnetic
cases.
Warning
- Do not disassemble or refit the product.
- Do not store it in a wet environment.
- Please keep the product away from heat and do not charge it near a heat source.
- Please prevent water or other liquid from entering the product interface. Otherwise the product may be damaged.
- Do not install the wireless car charger holder over an air bag cover or within the air bag deployment zone.
- During charging, make sure to remove the metallic/ magnetic protective case or cards (like bank cards), etc. from your device.
- During charging, the charger may heat up. This is a normal occurrence and won’t affect its performance. If the charger or your phone gets too hot, please disconnect the power supply and let it cool down before restarting the charging process.
- Avoid using bent or damaged USB cables.
Read User Manual Online (PDF format)
Loading......