Avantree NB05T Metal Detector Headphones and Transmitter for Prospecting User Guide
- July 23, 2024
- Avantree
Table of Contents
Avantree NB05T Metal Detector Headphones and Transmitter for Prospecting
Quick Start Guide
STEP 1
Turn on the Relay by sliding the switch to the “ON” position. The Relay will enter PAIRING mode automatically for first time use. For subsequent use, put your Relay into PAIRING mode by pressing & holding the MFB until the LED flashes red and blue alternately.
STEP 2
Enter the Torus into pairing mode –turned on Torus by sliding the power switch
to position for 1 second, the Torus will enter pairing mode automatically for
first time use, the LED indicator will flash red and blue with a “pairing”
voice prompt.
For non-1st use, press & hold for 5 seconds to manually enter pairing mode.
STEP 3
Keep the Relay & Torus close together and wait for 5-10s until they connect.
Once connected, the indicator will turn solid blue, and you hear a “connected”
voice prompt from Torus.
They will auto-reconnect for subsequent use. If not, repeat the above steps to
manually pair them.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>