Yaber T2 Smart Projector User Manual
- July 23, 2024
- YABER
Table of Contents
Yaber T2 Smart Projector User Manual
YABER Lifetime Professional Support
Dear Valued Customer,
Thank you for choosing Yaber T2 projector.
This manual will help you navigate through all the features.
We understand that there may be many questions and concerns that arise during
the use of the projector. We are also eager to hear your feedback. However,
leaving a review on the product page does not get the fastest solution. Many
common problems, such as inability to auto focus or keystone, sound issues,
WiFi or Bluetooth connection issues, can
usually be resolved with appropriate settings adjustments.
If you encounter any issues, feel free to send your order number and the
problems to us at service@yaber.com (e.g.
US+T2+000-0000000-0000000+Issues) Rest assured, our service team will offer a
solution to you within 24 hours.
Your satisfaction is our top priority. If you encounter any issues, we
sincerely hope you can give us an opportunity to make things right.
We wish you have an outstanding experience with the T2 projector.
Yaber Consumer Service Team
WARRANTY
Thank you so much for your purchase and support. We provide 3-year warranty
for Yaber T2 projector.
If you have any questions, please feel free to contact us.
For T2 Projector: service@yaber.com
Important Precautions
Please use the device correctly:
- Do not face the lens into eyes because the strong projector light may cause injury to the eyes.
- Do not block the air inlet/outlet of the device in order to avoid damage to internal electronic devices arising from normal heat dissipation failure.
- Do not wipe the lens directly with cleaning tools including paper and cloth to avoid damage to the lens, Please clean up the dust on the lens through clean air blowing.
- Do not wash the device with chemicals, detergents, or any liquid to prevent the circuit board from being corroded by rainwater, or moisture mineral-containing liquids.
- Keep the device and its components and accessories out of reach of children.
- Make sure that the device is used in a dry and ventilated environment.
- Do not store the device in excessively hot or cold places, because extreme temperatures will shorten the life of electronic devices. Place and use the device in an environment of 0°C-40°C
- Do not put the device into any heating equipment (such as a dryer and microwave oven) for drying.
- Do not firmly extrude the device or place barriers on it or its back to avoid damage to the device.
- Do not throw, strike, or sharply vibrate the device to avoid damage to the internal circuit board
- Do not try to disassemble and assemble the device yourself. If any issue occurs, please contact the after sales service of Yaber.