Sylvox RT24R3CND 22 inch RV TV with DVD Player Built in User Manual

Sylvox RT24R3CND 22 inch RV TV with DVD Player Built in

Note: The product and illustrations in this user’s manual is only for explanation purposes and may vary depending on the model.

General Information

To avoid damaging the television set please observe the following safety instructions during setup and use.

In extreme weather (storms, lightning) and long inactivity periods (going on holiday) disconnect the TV set from the mains. The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable. If the TV set is not disconnected electrically from the mains, the device will still draw power for all situations even if the TV is in standby mode or switched off.

• IMPORTANT – Please read these instructions fully before installing operating
• WARNING: Never let people (including children) with reduced physical, sensory, or mental capabilities or lack of experience and/or knowledge use electrical devices unsupervised.
• For ventilation purposes, leave at least 5cm of free space around the TV.
• The ventilation should not be impeded by covering or blocking the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
• The power cord plug should be easily accessible. Do not place the TV, furniture, etc. on the power cord. A damaged power cord/plug can cause fire or give you an electric shock.
• Handle the power cord by the plug, do not unplug the TV by pulling the power cord. Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock. Never make a knot in the power cord or tie it with other cords. When damaged it must be replaced, this should only be done by qualified personnel.
• Do not expose the TV to dripping or splashing of liquids and do not place objects filled with liquids, such as vases, cups, etc. on or over the TV (e.g., on shelves above the unit).
• Do not place open flames such as lit candles on the top of or near the TV.
• Do not place any heat sources such as electric heaters, radiators, etc. near the TV set.
• Do not place the TV on the floor and inclined surfaces.
• To avoid danger of suffocation, keep plastic bags out of the reach of babies, children, and domestic animals.
• Do not dispose of the batteries in a fire or with hazardous or flammable materials.
• Warning: Batteries must not be exposed to excessive heat such as sunshine, fire, or the like. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

WALL MOUNTING WARNINGS

• Read the instructions before mounting your TV.
• Use the specified wall mounting screws and other accessories.
• Tighten the wall mounting screws firmly to prevent the TV from fall.
• Do not over-tighten the screws.
• A television set may fall, causing serious personal injury or death. Many injuries, particularly
• to children, can be avoided by taking simple precautions such as educating children about the dangers of climbing on furniture to reach the television set or its controls.

Accessories

Please make sure the following items are included with your TV. If any items are missing, Please contact us.

Specification

Note: Design and specification modifications maybe made at any time without prior notice, all data and dimensions are approximations.

Installation

Base bracket guide

1. Place the TV unit on a flat and clean table.
2. Fix stand by 2 pcs screws via screw hole B and A.
3. Fix stand by 3 pcs screws via screw hole D and C.

Overview

1. SPEAKER

2. REMOTE CONTROL SENSOR

3. POWER INDICATOR

   • Green: In power on mode.
   • Red: In standby mode.

4. SOURCE

   •   * Toggles between all the available input sources

5. MENU

   • Press to see an on-screen menu of your TV’s features.

6. CH+/-

   • Press to change channels. In the on-screen menu, use the CH +/- buttons as up/down arrow buttons.

7. VOL+/-
   Press to increase or decrease the volume. In the on-screen menu, use the VOL +/- buttons as left/right arrow buttons.

8. EJECT / Eject DVD.

9. PLAY / Play/stop DVD (in DVD mode).

10. POWER Press POWER button to toggle between normal and standby mode.

DVB-S2 & CI+ will not be available in Australia CI+ will not be available in New Zealand

1. USB1/2 USB input.
2. L/R OUT Connect to the audio output jacks on your amplifier/home theater.
3. SCART Connecting for SCART signal.
4. DVB-S2 Connected to external SATELLITE to receive.
5. DVB-T2 is Connected to an external antenna to receive the ATV/DTV program in ATV/DTV mode.
6. COAXIAL OUT Coaxial Digital audio output.
7. EARPHONE OUT Connecting for headphones.
8. MINI AV IN Connecting for VIDEO signal input in Composite mode.
9. MINI YPbPr IN Connecting for the Y/Pb/Pr Input in Component mode.
10. CI+ Used to insert the CI card.
11. HDMI 1/2 Connecting for HDMI signal.

Supporting Signals

PRESET MODE (HDMI)

Remote-Control unit

1. POWER: Set your TV to power on or standby mode.
2. MUTE: Press to mute the sound. Press again to regain sound.
3. 0-9: Press 0-9 to select a TV channel directly. The channel will change after 2 seconds. Applicable for entering the page number in TELETEXT mode.
4. SLEEP: Set the time for the TV to turn off automatically.
5. : Return to the previously viewed program.
6. P.MODE: Select the picture mode.
7. S.MODE: Select the sound mode.
8. CH.LIST: Display channel list.
9. DISPLAY: Press to display the source and channel’s info.
10. SOURCE: Press to select signal sources for TV.
11. MENU: Allows you to navigate the on-screen menus (OSD).
12. EXIT: Exit from the menu or sub-menu.
13. Allows you to navigate the on-screen menus and adjust the system settings to your preference.
14. OK: Select the option.
15. CH+/-: Press these two buttons to change channels sequentially.
16. VOL+/-: Press these two buttons to increase/decrease the sound volume.
17. SCAN: Press to Auto scan TV program.
18. AUDIO: Press to change the language of the audio in DTV or DVD mode.
19. I/II: Select NICAM mode.Only be available in TV programmers with NICAM transmission, and the default mode is mono.
20. ASPECT: Press this button to select the aspect of the screen
21. : Open/close in DVD mode.
22. D.MENU: Quick navigation during Teletext or setup settings / DVD: VideoDVD Menu button.
23. SETUP: DVD system setup.
24. D.DISP: Quick navigation during Teletext or setup settings / DVD: DVD Information button.
25. R (DELETE): Delete function button.
26. G (RENAME): Rename function button.
27. Y (MOVE): Move function button.
28. B (SKIP): Skip function button.
29. FAV: Select favorite channels.
30. EPG: Press to display EPG (Electronic Program information).
31. TIME SHIFT: Press to switch to TIME SHIFT mode immediately.
32. REC.MENU: Press to switch to REC.MENU immediately.
33. SUBTITLE: Press to select the subtitle language.
34. REVEAL: Shows hidden words or pages by Teletext.
35. TEXT: Switch on/off of the Teletext window.
36.  Press to record the program immediately.
37. INDEX: Returns to Index page by Teletext.
38. TV/RADIO: Press to switch between DTV and radio programs
39. CANCEL: Switches the Teletext window in the background, only the current page no is visible.
40. MIX: Transparency of Teletext window.
41. REPEAT: DVD: Repetition mode button.
42. SIZE: Zoom In or Out by Teletext window.
43. HOLD: Holds on the current page.
44. SUBPAGE: Displays a sup-page of upper options.
45. : Play and Pause by Media-Player / DVD.
46. : Fast Rewind by Media-Player and DVD.
47. : Fast Forward by Media-Player and DVD.
48. : Stops playback by Media-Player and DVD.
49. : Plays the previous file by Media-Player.
50. : Plays the next file by Media-Player.

General Description

Installing Batteries in the Remote Control

• Point the remote towards the remote control sensor of the wireless TV and use it within 7 meters.
• Put the used batteries into the recycling bin since it can negatively affect the environment.

NOTES:

• One loading of batteries will last for 1 year under normal use.
• If you do not intend to use the remote controller for a long period of time, remove them to avoid damage due to leakage.
• The batteries (battery pack or batteries installed) shall not exposed to excessive heat such as sunshine, fire or the like.

External Connection

Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the antenna jack. For details Please refer to the following drawing.

Quick Set-Up

Set-Up for Satellite Reception
The “First Time Installation” Menu is automatically displayed in the first time switch on.

Select menu Language and Country; Press OK; The Tuning Setup Menu is displayed.

Select DTV or ATV + DTV as the receiving mode (Tune Type); Select Satellite as the input source (Digital Type); Select the desired satellite (ASTRA/HOTBIRD are standard); Press OK; First Time Installation Dialogue is displayed.

Select Yes to load the preset channel list (for ASTRA and HOTBIRD), your television set is ready. Select No to perform a manual search for channels on the previously selected satellite.

Initial Installation for Reception via DVB-C/DVB-T
DVB-C: Connect the DVB-C coaxial cable in the DVB-C input of the television set, or DVBT/ T-2 HD coaxial cable in the DVB-T input of the television set. If using an active antenna without independent power supply, in the menu switch the “5V antenna power“ On (Channel Menu); Turn on the television set with the on/off switch and press the POWER button on the remote control or on the device; The “First Time Installation” Menu is automatically displayed in the first time switch on;

Select the menu Language and Country; Press OK. The Tuning Setup Menu is displayed.

Select DTV or ATV + DTV as the receiving mode (Tune Type); Select the input source (Digital Type), DVB-T; Press OK. The station search dialogue box is displayed “Auto Tuning Status” . The TV and radio station search may last several minutes. Your television set is ready for use.

Main menu

Selecting the Main Menu
Open the main menu by pressing the MENU button (control panel on the television set or remote control); Select and confirm the desired option. The Main Menu contains the following sub-menu:

Channel Menu
Open the Main Menu by pressing the MENU button (control panel on the television set or remote control); Select Channel and confirm with the OK button. The Channels Menu is displayed.

Note
The functions may vary depending on the origin of the signal.

Manual Tuning“ menus are displayed.
DVB-C Manual Tuning DVB-T Manual Tuning| Beginning manual channel search for the selected source.

“DVB-C Manual Tuning“ or “DVB-T Manual Tuning“ menu are displayed

Programme Edit| Organising, deleting, skipping, marking as favorites. The “Program Edit“ menu is displayed.
Signal Information| Show signal information of the station.
CI+ Information| Show information on an inserted CI card. See chapter 6 “CI+ Modul“
Dish Setup| Erasing, managing, re-setting satellites and transponders. Menu “Dish Setup“ is displayed.
5V antenna power| Turning set on with an active antenna in order to feed 5V to the antenna.

Smart-D function
DiSEqC settings for automatic dish alignment

• ON : Switch-on automatic dish alignment and start the RF signal research;
• PARK: closing automatic dish alignment system.

Automatic Channel Search/Receiver Settings
In the Channel Menu select the automatic channel search function (Auto Tuning). The Receiver Settings Menu (Tuning Setup) is displayed.

With Satellite selected as source:

Network scan

Radio

With DTV selected as source:

Tune Type

| ATV (for reception of analogue channels) DTV (for reception of digital channels)

ATV + DTV (for reception of analog and digital channels)

Scan Type| Full*

Network Scan

Network ID| Auto 65535
Frequency| Auto 770000
Symobl(ks/s)| Auto 6900
Sorting by LCN| On Off

Press OK to begin automatic channel search, the status of the channel search (Auto Tuning) is displayed .

Manual Analogue Search
In the Channels Menu select ATV Manual Tuning, and the Menu ATV Manual Tuning is displayed. Enter and confirm the desired settings.

Manual DVB-C Search/Manual DVB-T Search
In the Channel Menu select the CADTV Manual Tuning if on cable, or DTV Manual Tuning if receiving via antenna. The Menu CADTV Manual Tuning or DTV Manual Tuning is displayed.

Managing List of Channels
In the Channel Menu select Program Edit, and the Program Edit Menu is displayed. The following options are available: Delete channels (red button on the remote control); Move channels (yellow button on the remote control); Skip channels (blue button on the remote control); Add channels to favorites list (FAV button on the remote control).

Note
Please follow the instructions at the bottom of the screen.

Satellite Configuration

• In the Channel menu select Dish Setup, the Dish Setup Menu is displayed. The following
• options are available:
• Edit/add/delete satellite;
• Edit/add/delete transponder;
• Edit satellite setting (for example DiSEQc setting).

Satellite

| Satellite list. The satellite settings can be edited (green button). It is also possible to delete satellites (red button) and to add satellites (yellow button).

Transponder

| List of the transponders corresponding to the selected satellite (“Satellite” column). The transponder settings can be edited (green button). It is also possible to delete transponders

(red button) and to add transponders (yellow button).

Satellite settings (3rd column)

| List of the settings for the selected satellite (“Satellite” column). Configure the DiSEqC function to guide a compatible satellite antenna.

Picture Menu
Call up the Main Menu by pressing the MENU button (control panel on the television set or remote control); Select Picture and confirm with the OK button, Menu Picture is displayed. Important function in the Picture menu: Customizing picture setting.

Note
Customizing picture settings is only possible in Personal mode.

Picture Mode

| Standard (pre-configured settings) Mild (pre-configured settings)

Personal (settings can be adjusted manually) Dynamic (pre-configured settings)

Contrast| Setting contrast
Brightness| Setting brightness
Colour| Setting colour ratio
Tint| Setting tint(NTSC only)
Sharpness| Setting picture sharpness

Colour temp

| Setting colour temperature: Normal

Warm

Cold

Noise Reduction

| Setting noise reduction Low

Medium

High Off

Screen| Setting the position and size of the PC image
Dynamic CR| On

Off

Face Colour| Setting skin tones
Aspect ratio| 16:9 – 4:3 – Auto – Zoom1 – Zoom2

Blue screen

| Is displayed when no signal is available On

Off

Sound Menu
Display the Main Menu by pressing the MENU button (control panel on the Television set or remote control; Select Sound and confirm with the OK button, the Sound Menu is displayed. Important functions in the Sound menu: Adjusting the sound setting.

Note
Adjusting the sound settings is only possible in Personal mode.

Sound Mode

| Standard (Preconfigured settings) Music (Preconfigured settings) Movie (Preconfigured settings) Sports (Preconfigured settings)

Personal (Settings can adjust manually)

Treble| Adjust Treble
Bass| Adjust Bass
Balance| Setting balance between left and right speakers
Auto Volume| Automatic volume control: On

Off

Surround Sound

| Surround reproduction: Off

SRS TruSurround TruSurround

SPDIF Mode| Setting digital audio output: Auto

PCM

AD Switch| “AD Switch” Menu is displayed
Hearing Impaired| Off On

AD Switch
In the Sound Menu select AD Switch. The AD Switch Menu is displayed.

Time Menu

• Display the Main Menu by pressing the MENU button (Control panel on the television set or remote control).
• Select Time and confirm with OK button.> Time Menu is displayed.
• Important function in the Time Menu:
• Setting the time zone;
• Setting an automatic on/off time;
• Setting the sleep timer;
• Setting automatic switch off;
• Setting time before menu fade-out.

“Off Time” Menu is displayed

On Time| Setting switch-on time for the television

“On Time” Menu is displayed

Sleep Timer| Setting time after which the television set automatically switches off Off

10, 20, 30, 60, 90, 120, 180, 240 min.

Auto Standby

| Setting whether and when the television set automatically switches off if no operations are performed

Off

3, 4, 5 h

OSD Timer| Setting whether and when the menu automatically fades out Off 5, 10, 15, 20, 25, 30 s

Switch-off Time
In the Time Menu select Off Time. The Off Time Menu is displayed.

Off Time

| Off Once

Everyday Mon-Fri Mon-Sat Sat-Sun

Sun

Hour| Setting time (Hour)
Minute| Setting time (Minute)

Switch-on Time
In the Time Menu select On Time . The On Time Menu is displayed.

Function| Explanation|
---|---|---

Off Time

| Off Once

Everyday Mon-Fri Mon-Sat Sat-Sun

Sun

|
Hour| Setting time (Hour)|
Minute| Setting time (Minute)|
Source| Selecting input source for playback when the television set is to be turned on.|
Channel| Selecting the channel at which the television is to be turned on.|
Volume| Selecting the volume at which the television is to be turned on.|

Setup Menu

• Display the Main Menu by pressing the MENU button (control panel on the television set or the remote control).
• Select Setup and confirm with the OK button. The Setup Menu is displayed. Important functions in the Setup Menu:
• Setting the language for menu, audio and subtitles;
• Resetting to factory default settings;

Dutch, Italian, French, Spanish, English)

TT Language| Setting font (West, East, Russian, Arabic, Farsi) for the teletext display
Audio Language| Setting audio language 1 and 2 for multi-channel sound “Audio Language”

Menu is displayed

Subtitle Language| Setting sub-title language 1 and 2” Subtitle Language“ Menu is displayed
Reset| Reset to factory settings
Software Update (USB)| Performing software update (a USB device with the update files must be

connected)

Version| Displaying version (Model, panel type, and software version)
Import DefaultData| Loading ASTRA/HOTBIRD standard channel list

(only for satellite reception)

BT Sat Antenna

| Activate Pairing Mode:

Activates Bluetooth pairing of the satellite antenna with a smartphone. Clear List:

The list of devices Bluetooth-paired with the satellite antenna will be cleared.

Lock Menu

• Display the Main Menu by pressing the MENU button (control panel on the television set or the remote control).
• Select Lock and confirm with OK button. The Lock Menu is displayed. Important functions in  the Lock Menu:
• Setting a system lock;
• Changing the password;
• Locking channels, parental guidance, button lock.

Note
To change settings in the Lock Menu a password is required. Factory set password is “0000”.

On

Set Password| Personalising the password
Channel Lock| Locking individual channels. Access is only possible with the password.

“Channel lock“ Menu is displayed.

Parental Guidance

| Setting age limit for parental control settings Off

4 – 18

Key Lock

| Activating key lock. Only possible if the option On was selected in the System Lock function.

Off

On

Hotel Mode

| Limiting functions of the television set for the user and importing preset database (a USB device with the database files must be connected).

The “Hotel Mode“ Menu is displayed.

Locking Channels
In the Lock Menu select Channel Lock. The Channel Lock Menu is displayed; Lock or release the desired channels and confirm.

Hotel Mode
In the Lock Menu select Hotel Mode. The Hotel Mode Menu is displayed.

Off

Source Lock| Locking individual input sources
Default Source| Selecting input source with which the television set is to be turned on.
Default Prog| Selecting channel for playback when the television set is to be turned on
Default Volume| Selecting volume at which the television set is to be turned on
Max. Volume| Selecting maximum volume for the television set
Import Database| Importing database from a USB device
Export Database| Exporting database to a USB device
Clear Lock| Resetting all locks

Note
To save and restore your channel list use the Export Database and Import Database functions.

CI module
The television set has a CI slot and supports both CI and CI+. CI module is a plug-in card the size of a credit card that fits into the slot of your DVB receiver, and which in turn can also hold a smart card. With this combination, you have access to encrypted pay channels.

Note
Use only CI modules which are authorized or certified by the service provider. This is the only way to guarantee compatibility.

Inserting the smart card and the CI module
Turn the television set off; Insert the CI Module into the CI slot of the television set. Make sure you are inserting it the right way round (see illustration); Insert the smart card into the CI Module. Make sure it is the right way round (see the arrow); Turn the television set back on.

Multimedia Operation

Prerequisites
You can play back files saved on a USB device, if the following file formats are on the storage device:

Movie

| – dat, .mpg, mpeg

–  vob

–  mkv

-.mp4, *.mov

-.avi

-.flv

-.asf, – .wmv

Music

| mp3 wav wma/asf aac

ac3

Photo

| –  jpg, – jpeg

–  png

–  bmp

Text| -.txt

Playback

• Press the INPUT button on the remote control.
• Select USB as the input source. The Multimedia Menu is displayed.
• Enter the desired media type (Photo, Music, Movie or Text) and confirm with OK. The selection screen with the file/directory structure is displayed.
• Select the storage location (C) of the medium and, if necessary, the subfolder. The files already present are displayed.
• Select the desired file. Press OK button on the remote control to mark the files (e.g. photos or music) to be shown/played.
• Press the Play/Pause button on the remote control. The Media Player menu is displayed.

Movie
Press the OK button on the remote control to display the Movie menu.

RepeatNone Repeat1

RepeatALL

| No repeat

Repeat current film

Non-stop playback of all films

Set A/Set B| Use this to set point A and point B to repeat a film segment.
Playlist| Shows the play list
Info| Displays movie info
Slow| Slow-motion playback
Step| Stop-start playback
Goto Time| Jump to playback time
Zoom In| Increases film size
Zoom Out| Decreases film size

Aspect Ratio

| Auto 4:3

16:9

Move View| Move image in increased-size film with the arrow keys

Music

RepeatNone

Repeat1 RepeatALL

| No repeat

Repeat current track

Non-stop playback of all tracks

Info| Displays track info
Goto Time| Jump to playback time

Photo

RepeatNone Repeat1

RepeatALL

| No repeat

Repeat current image

Non-stop playback of all images

Musik| Plays music from USB device during slide show
Playlist| Shows the play-back list
Info| Shows file info
Rotate| Turns the image 90° to the right
Rotate| Turns the image 90° to the left
Zoom In| Increases image size
Zoom Out| Reduces image size
Move View| Move image in zoomed view with the arrow keys

Ending Playback
Press the EXIT button on the remote control to end the playback and return to file selection. To change the media type press the EXIT button on the remote control repeatedly until the Multimedia Menu is displayed.

DVD Operation

SOURCE
Press the “SOURCE” button menu. The up and down direction keys can be selected, or Press the left or right button to select the DVD, and press the Enter button to enter. Press the DVD SETUP button to enter that function.

TV SYSTEM
Set the options: NTSC/PAL/AUTO.

POWER RESUME
Press the ENTER function on or off.

TV TYPE
Set the screen ratio options: PS(4:3 Pan Scan), Normal/PS(4:3 Letter Box), and Wide (16:9) the default setting is wide.

PASSWORD
Enter “0000” to enter.

RATING
Disc Options.

DEFAULT
This option will return the DVD to its factory default settings.

OSD LANGUAGE
Set the OSD Language options.

AUDIO LANG
DVD language selection options.

SUBTITLE LANG
This player can display DVD subtitle languages if supported by the DVD disc. When playing DVD’s you can hide the subtitle or choose any of them as the current subtitle language.

MENU LANG
Set the MENU Language options.

AUDIO OUT
Press the “ENTER” Key. The up and down direction keys can be used for selection.

KEY
Press the “ENTER” Key. The up and down direction keys can be used for selection.

DUAL MONO
Press the “ENTER” Key. The up and down direction keys can be used for selection.

Special Function
To open the channel list proceed as follows: Press the CH.LIST button on the remote control or press the OK button on the remote control (only if no menu is displayed). The Channel List Menu is displayed. Symbols indicate whether a channel is locked, encrypted, to be skipped or a favourite.

Use the navigation buttons on the remote control to filter t ◄/► he indicated channels.

Select the desired channel and press OK.

Favorites
To open the favorites list proceed as follows: Press the FAV button on the remote control. The Favorite List Menu is displayed.

The channels previously designated as favorites are displayed in this view. Symbols indicate if a channel is to be skipped or is marked as a favorite. Select the desired channel and press OK.

Note
To edit the channel list (delete, move, skip, add to favorites), in the channel menu select Program Edit.

Channel information
To open channel information, proceed as follows: Press the DISPLAY button on the remote control. Channel Information is displayed.

Subtitle Language
To display the subtitle language, proceed as follows: Press the SUBTITLE button on the remote control. The Subtitle Language Menu is displayed;

Select the desired subtitle language and press OK.

Programme Guide (EPG)
To display the programme guide proceed as follows: Press the EPG button on the remote control. The 7-Day TV Guide Menu is displayed.

• In this view, you will find information on the current day’s programming, that of the previous day, and also of the following day.
• Select the desired program and press OK.

Radio

• To switch between Radio mode and TV mode, proceed as follows:
• Press the TV/Radio button on the remote control. You are in Radio mode;
• Press the blue button on the remote control to deactivate the screen. The radio will continue playing;
• Reactivate the screen by pressing any button on the remote control;
• Press the TV/Radio button on the remote control again to return to the TV mode.

Note
It is possible to use the Vol+/Vol- and the MUTE buttons with the screen deactivated. When using these buttons the screen remains deactivated.

Teletext

• Teletext is made available free of charge by most TV stations. It provides various types of information, e.g. News Ticker and updated news, weather forecasts, information on business, sport, culture, advice services, etc., and also on television programming.
• Press the button TV/TXT on the remote control. To display the teletext a station must be selected which provides this service.
• To select a page, with the number buttons on the remote control enter the three-digit number of the desired page.
• Use the CH+ and CH- buttons on the remote control to move forward and backward between the pages.
• Use the HOLD button on the remote control to set a page.
• Use the INDEX button on the remote control to move to the opening page or the table of contents.
• Use the SIZE button on the remote control to zoom the upper or the lower section of the page or to return to the normal display.
• Use the REVEAL button on the remote control to reveal hidden information or to hide this information again.
• Use the SUBPAGE button on the remote control to directly select subpages which are then automatically displayed.
• Press the TV/TXT button on the remote control again to leave the teletext and return to TV mode.

Read Before Using Apps
(*Terms & Conditions Apply)

• Due to the product characteristics featured on the Apps store, as well as limitations in available content, certain featured applications, and services may not be available on all devices or in all territories. Some Apps featured may also require additional peripheral devices or membership fees.
• Services and content availability are subject to change without prior notice.
• Manufacture takes no legal responsibility whatsoever for any interruption of App services caused by the service provider for any reason.
• An unstable Internet connection may cause delays or interruptions. In addition, applications may terminate automatically depending on the network environment.
• Applications services and updates may become unavailable.
• Application content is subject to change by the service provider without prior notice.
• Specific services may differ with the version of the application installed on the TV.
• An application’s functionality may change in future versions of the application.
• Depending on the third-party service provider/s policies, certain applications may not support multitasking.
• The response to remote commands and the resulting on-screen display may be delayed while a webpage is loading.
• The copy and paste operations are not supported.
• The web browsing speed will differ with the network environment.
• Depending on the types of video/audio codecs supported, it might not be possible to play certain video and audio files while playing content.
• Apps stores have a certain limitation, they consist of many inbuilt apps for various needs of users but users don’t have the facility to add other apps from any other media.

Troubleshooting

If you have any problem, check the couter measures for each symptom listed below. The following symptoms may have been, caused by inaporopriate adjustment rather than actual malfunction of the unit. If the trouble pens sts, contact the Customer Care Centre, see back page for contact details.

WARNING

Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television set.
• Only using furniture that can safely support the television set.
• Ensuring the television set is not overhanging the edge of the supporting furniture.
• Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
• Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television set or its controls

If your existing television set is being retained and relocated, the same considerations as above should be applied. The plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

THE DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT WASTE PRODUCTS ON THE PART OF FINAL USERS IN THE EUROPEAN UNION This symbol on the product or on the container indicates that this product cannot be eliminated with the general waste. The user is responsible for eliminating this kind of waste by throwing it away at a “recycling point” specifically for electrical and electronic waste. Selective collection and electrical equipment recycling contribute to preserving natural resources and warrant waste recycling to protect the environment and health. In order to receive further information about electrical and electronic waste collecting and recycling, contact your Local Council, the service of household waste or the establishment where the product was acquired. The crossed-out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.

Warranty

Thank you for purchasing this Sylvox product. We are glad to offer 12 months free warranty for you. If you have any questions, please contact us via our after-sales email or website for assistance.

After-sales email:

• service.eu@sylvoxtv.com
• service.uk@sylvoxtv.com
• service.au@sylvoxtv.com

Website:www.sylvoxtv.eu

Customer Service Support: Service Hotline-USA: +1(833)379-5869 (Monday- Friday, 9:00 AM-5:00 PM EST)

Warranty Policy

When returning an item, please note the following:

1. Only items purchased directly from www.sylvoxtv.com and authorized resellers can be returned, such as Amazon, Walmart, Newegg, Wayfair, Aliexpress, etc. We will not accept any return requests for products purchased from unauthorized third-party suppliers. Customers must contact the original vendor with your order ID or purchase proof and the details of the product issue at Sylvox-Team to request a return/refund/repair/replacement before returning products. Sylvox will provide you with the shipping label in the mail. Sylvox are responsible for all return shipping costs for quality problems. If there is no reason to return the product after installation and use, Sylvox shall have the right to charge restocking fees of 20% of the product value. (Only accept applications for no reason return within 7 days after arrival, and freight costs are the responsibility of the customer) Ensure that the item(s) you are returning is repackaged in the original condition with all the documentation and accessories that came with it. If the returned product is not in its original packaging: artificial damage causes to affect the second sale, such as its appearance being damaged, the lack of accessories, etc., we will deduct the corresponding expenses according to the situation. We will handle your request once getting your returned item.

2. How to return a product for a refund? (30 days money-back guarantee)
   To return an item to Sylvox, Please contact the Sylvox team to submit an after-sales application, we will provide you with the shipping label in the mail. Please include your original order number or order proof in the email and ensure that the item is returned within 30 days. No refunds will be issued until the item is received in its original packaging (with its documentation and accessories).

3. Refunds
   Once we receive and verify the condition of your product, a refund is initiated. The way your refund is processed depends on your original payment method. For credit or debit cards, refunds will be back to the card-issuing bank within 7-10 business days of receipt of the returned item. Please contact the card-issuing bank with questions about when the credit will be posted to your account.

4. What does the warranty not cover?

   • The wrong way of use and improper repair by the user caused the failure or damage.
   • Failure or damage caused by transportation, moving, and falling after purchase.
   • Other unavoidable external factors cause failure and damage.
   • Improper use of the equipment caused by water or other solution of damage.
   • Failure caused by a lightning strike or other electric system reasons
   • Damage caused by using a power supply other than the specified voltage.

Warranty Period

• Sylvox repairs the TV free of charge under the condition of the normal use of the instruction manual within 12 months.
• Sylvox warrants that this product conforms to the manufacturer’s specifications and will be free of defects in material and workmanship should any defect occur.
• Sylvox will correct the defect subject to the following conditions:
  • Any defects caused or repairs required as a result of the abusive operation, negligence, accident, shipment damages, improper delivery and installation, application, and use for which this product was not intended as set forth in the user’s manual or other applicable Product documentation.
  • Any defects caused or repairs required as a result of any product that has been tampered with, modified, adjusted, or repaired by any person other than Sylvox, a Sylvox authorized service provider or a Sylvox authorized service center or dealer.
  • Any replacement of accessories, glassware, consumables or peripheral items required through normal use of the Product, including but not limited to, earphones, remote controls, batteries, etc.
  • Any cosmetic damage to the Product surface or exterior, including but not limited to that which has been defaced or caused through normal wear and tear, improper shipping and handling, or the use of chemical cleaning agents.
  • Any defects caused or repairs required as a result of damage caused by any external or environmental conditions, including but not limited to, the use of incorrect voltage, fluctuations or surges in transmission line/power line voltage, liquid spillage, or acts of nature or God.
  • Warranty claims for Products returned with the altered, illegible, or missing model, factory serial number, and UL markings.
  • Any Products used for rental, business, or commercial purposes.
  • Any installation, consumer instruction, delivery, setup, adjustment, and/or programming charges.
  • A Product that is not installed following installation instructions is included with the Product. Any signal reception problems (including antenna-related problems), images “burnt” into the screen, signal noise or echo, interference or other signal transmission or delivery problems, availability of third-party provided services or content (including, without limitation, image, audio or video content).

No other entity other than Sylvox is authorized to extend, enlarge or transfer this warranty on behalf of Sylvox.

The express warranties in this limited warranty are, in place of and, except to the extent prohibited by applicable law, Sylvox disclaims all other warranties and conditions, express or implied, whether arising by law, statute, by course of dealing, or usage of trade, including, without limitation, implied warranties or conditions of all claims, whether based in contract, negligence, strict liability or otherwise. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

For any questions, feel free to contact us via at any time!

• service.eu@sylvoxtv.com
• service.uk@sylvoxtv.com
• service.au@sylvoxtv.com

References

• Sylvox Deutschland: Hochwertiger Outdoor-TV, 12V TV, Küchen-TV, Spiege – Sylvox-EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>