Maidesite AX05 Heavy Duty Floor Lift User Manual

Maidesite AX05 Heavy Duty Floor Lift

Product Information

Specifications

• Product Name: MAIDeSITe Electric Lift Chair – AX
• Material: Carbon steel frame, PU leather cushion
• Weight Capacity: Up to [specific weight] pounds
• Height Range: [specific range] inches to [specific range] inches
• Battery: Rechargeable lithium battery
• Usage: Indoor on flat, hard surfaces like tile, hardwood, marble, concrete, and flat carpets
• Not Waterproof: Keep away from moisture

Product Usage Instructions

Safety & Warning

• Read the manual thoroughly before the first use.
• Keep the manual accessible for reference.
• Use the chair solely for its intended purpose.
• Evaluate user suitability before use.
• Ensure the environment meets safety standards.
• Inspect components before each use.
• Clean the chair before each use.

Assembly Instruction

1. Unbox all components carefully.
2. Attach the seat cushion to the frame securely.
3. Connect the battery to the controller.
4. Ensure all parts are properly aligned and tightened.

Use Instruction

1. Sit down slowly and carefully on the chair.
2. Adjust the height using the push rod on the back panel.
3. Operate the chair using the handheld controller.
4. Secure the safety belts before use.
5. Avoid sudden movements or excessive strain on the chair.

Maintenance and Care

• Regularly inspect for any signs of wear or damage.
• Clean the chair with a damp cloth and mild detergent.
• Avoid exposing the chair to moisture or direct sunlight.
• Store the chair in a dry and safe location when not in use.

Storing and Moving the Device

• Fold the chair for compact storage.
• Use the small caster wheels for easy mobility.
• Avoid harsh impacts or dragging the chair across surfaces.

FAQ

Q: Can the chair be used outdoors?

• A: No, the chair is intended for indoor use on flat, hard surfaces only.

Q: How often should I inspect the chair for maintenance?

• A: It is recommended to inspect all components before each use and have the equipment inspected annually by a qualified technician.

Product Description

• The MAlDeSITe Electric Lift Chair – AX05 is tailored for the elderly, disabled, and fall-risk individuals, offering safety and convenience. This chair is especially beneficial for those with reduced lower limb mobility, fall risks, or difficulties in sitting or standing unaided.
• Constructed from high-quality materials, the AX05 features a durable carbon steel frame and an eco-friendly, comfortable PU leather cushion. Its robust carbon steel build can support up to 440 pounds, while its design ensures stability.
• The chair’s adjustable height mechanism is controlled by a push rod in the back panel, with a range from 2.56 inches to 22.24 inches, accommodating most users’ needs.
• A rechargeable lithium battery powers the chair’s handheld controller, eliminating the need for direct charging and the inconvenience of power cords and sockets.
• Safety is a priority in the AX05’s design, incorporating safety belts and armrests for physical security and psychological comfort. The chair can be safely operated using the controller, with users secured by the belt and comforted by the lowered armrests.
• The chair’s foldable design and small caster wheels add to its convenience, allowing for easy storage and mobility. These wheels are specifically for moving the chair when not in use.
• The AX05 is intended for indoor use on flat, hard surfaces like tile, hardwood, marble, and concrete, as well as on flat carpets. It is not waterproof and should be kept away from moisture.

Safety & Warning

Mandatory Operations

• Please read this manual thoroughly before the first use of the MAlDeSITe Electric Lift Chair – AX05. Familiarizing yourself with the product ensures safe and efficient operation.
• Keep this manual accessible for reference by anyone who might interact with or operate the lift chair.
• Use the Lift Chair – AX05 solely for its intended purpose. It is not to be used as a stand, ladder, support, or for any similar purposes.
• Evaluate the suitability of the user before use, taking into account factors such as weight, size, cognitive abilities, and joint mobility.
• The lift chair must not be used by individuals deemed unsuitable.
• If used by individuals with disabilities, ensure that a companion or an alarm device is within reach.
• Before use, ensure that the environment where the lift chair will be used meets the necessary safety standards. This should be verified by an assistant or professional.
• Before each use, inspect all components for completeness and any signs of damage. Additionally, have the equipment inspected annually by a qualified technician.
• Before each use, ensure that the corner brackets and seat surface are clean, free of stains, and devoid of debris.
• When using the chair, the user should sit down slowly and carefully to prevent any undue strain that might harm the lift chair.
• Operate the lift chair exclusively with the provided hand controller.
• Follow the Assembly Instructions meticulously when installing the MAIDeSITe Electric Lift Chair – AX05.
• Handle the Lift Chair – AX05, its charger, and hand controller with care to avoid drops. If you observe any visible or audible signs of damage, refrain from using the lift chair and contact us immediately.
• Refer to the “Af- ter-Sales Service” section for contact information.
• Warning: Risk of injury – Do not stand in front of the unlocked seat, falling seat may cause injury.
• Warning: Risk of Injury – To prevent tipping, ensure brackets are fully installed before use, and avoid standing in front of the lift chair.

Not Allowed Operations

• Do not overload the Lift Chair.
• Do not stand on the Lift Chair.
• Do not sit in the opposite direction while using the chair.
• Do not use on steep inclines (greater than 5º) or on stairs.
• Do not use it if any parts are missing.
• Do not stand in front of the chair before the brackets are securely installed.
• Do not stand in front of the upright seat if the seat is not secure.
• Keep children and animals away from the Lift Chair.
• During use and maintenance, do not insert hands into moving parts or under the seat.
• Do not modify the equipment in any way.
• While using the Lift Chair, avoid using objects that could get trapped in the mechanism, like brushes.
• If a malfunction occurs, refrain from operating the Lift Chair.

Battery, Charger, and Hand Controller Care Instructions

• If the device is not used for an extended period, charge the battery once a month to prolong its lifespan.
• Use the designated charger to charge the hand controller
• The charger is specifically designed for the hand controller and should not be used for any other purpose
• Do not attempt to disassemble the hand controller or charger yourself
• Battery capacity may reach its optimum state after several charge cycles
• Avoid charging near water or heat sources
• Keep the hand controller away from heat sources
• Charge the battery immediately when it is low. Do not continue to use it on low-battery
• The indicator light will turn green when fully charged, which takes about 2.5 hours
• The charger is equipped with a protection mechanism and will automatically stop charging when full
• For replacements or faults, you can purchase them on Amazon. If within the warranty period, or if there is any hardship, please contact us for a replacement (follow the instructions provided in the “After-Sales Service” section).

Assembly instruction

Unboxing

• Upon receiving, inspect the shipping box for integrity. If any parts are missing or damaged, please contact us (refer to the “After-Sales Service” section for information).

The package should include the following components:

Please note:

Start by removing the Mainframe, then proceed with other components.

• To detach the main frame, hold the metal rods located at both sides of the chair’s bottom frame near its base.
• Be careful of the steel rod within the frame; it may slide out if the connectors are not yet properly installed.
• When installing brackets, make sure to position yourself behind the lift chair.
• Retain the shipping box for potential future use.

Assembly Instruction

Please follow the steps below to assemble the MAlDeSITe Electric Lift Chair – AX05.

1. STEP 1 Extract the main frame as shown. (Hold the chair’s main frame bottom with both hands)
2. STEP 2 Flip the chair sideways to the ground.
3. STEP 3 Connect the hand controller to the main frame.
4. STEP4 Press the up button to lift the frame by 8 inches.
5. STEP 5 Install the left connector.
6. STEP 6 Ensure the connector is facing upward.
7. STEP 7 Align screws with all holes first, then secure.
8. STEP 8 Repeat the same process for the right connector.
9. STEP 9 Install brackets behind a raised chair.
10. STEP 10 Prohibit installing with people in front of the chair.
11. STEP 11 Install the right bracket.
12. STEP 12 Fit the right bracket into the buckle and align the holes.
13. STEP 13 Press the right bracket against the main frame.
14. STEP 14 Repeat the same process for the left brackets.
15. STEP 14 Complete.

Use Instruction

Pre-Use Instructions

• Before use, ensure the Lift Chair – AX05 is placed on a flat, hard surface in a dry area.
• Inspect the bottom of the lift chair for debris and remove any if found.
• Ensure the hand controller is properly connected before use.
• Ensure all parts are properly installed, including connectors and brackets.
• Ensure the seat is fully lowered to a horizontal position.
• Warning: If brackets are not correctly installed, stay clear of the chair front!
• Warning: If the seat is not fully lowered, keep clear of the seat front!

Hand Controller

• Depending on the user’s weight, a fully charged battery can support up to 5 uses (testing with a 220lbs user showed 5 full cycles of lowering and raising).
• During use, the indicator light will be on, showing the battery level.
• Green: Battery level above 30%, lift chair functions normally.
• Blue: Battery level between 10% – 30%, lift chair should be charged soon.
• Red: Battery level below 10%, lift chair must be charged immediately.
• For charging instructions, refer to the “Charging the Hand Controller” section.

Emergency Stop

• If the Lift Chair fails to stop normally, press the emergency stop button to halt it immediately.
• Pressing the emergency stop during descent will lock the lowering function.
• To resume normal operation, raise the seat to its highest position before attempting to lower it again.

Using the AX05 in Suitable Environments

1. SCENE 1 Before use, flip up the armrests on both sides of the lift chair.
2. SCENE 2 The user should sit on the chair. If unable to do so unassisted, seek help.
3. SCENE 3 Lean back against the chair, and fasten the safety belt.
4. SCENE 4 Lower the armrests on both sides of the lift chair.
   • Note: If the armrests are loose or prone to falling off, you can tighten the bolts on both sides of the armrests.
5. SCENE 5 To lower the lift chair, press the down button; to raise it, press the up button.
6. SCENE 6 When moving up or down, hold onto the armrests or place hands on the knees.
7. SCENE 7 To stop at the desired height, release the up or down button, and the lift chair will stop moving

Maintenance and Care

Maintenance of the Lift Chair – AX05

• The Lift Chair – AX05 must undergo a regular maintenance check at least every 12 months.
• This check includes a visual inspection of all parts, especially load-bearing and assembly components, and all necessary functional tests.
• If the inspection reveals any defects, wear, or other damage that could affect the safety of the Lift Chair – AX05, it must be taken out of operation until the issues are rectified.
• All inspections should be carried out by qualified and trained personnel.
• Maintenance of the Backrest Cushion & Seat Cushion
• The cushions are made of easy-to-clean PU leather. Use a soft cloth or sponge to wipe the surface, with warm water or mild detergent.
• Avoid strong cleaning agents, prolonged exposure to sunlight to prevent fading or cracking, and contact with sharp objects to prevent scratches. If stained with water or oil, gently wipe off with a clean cloth immediately to prevent stains.

Maintenance of the Charger

• The charger requires no maintenance. Clean its exterior only with solvent-free, mild detergents or a damp cloth. Ensure no liquid enters the charging device.
• Before reusing the charger, ensure it is completely dry.
• If necessary, store the device in a dry, ventilated area for a few hours, disconnected from the main power source.

Charging the Hand Controller

• Ensure the hand controller is sufficiently charged before use. It must be charged with the provided specialized charger. Do not charge in damp environments.
• Connect the hand controller to its dedicated charger.
• Plug the charger into an outlet. The charger’s indicator will show red while charging and turn green when fully charged.
• The hand controller’s indicator will also light up, indicating the battery level (green: >30%, blue: 10%-30%, red: <10%).
• To fully charge the battery, connect it to the charger for about 3 hours. The charger has a protection mechanism and will automatically power off when fully charged.
• Unplug the charger from the outlet.
• Disconnect the hand controller from the charger

Storing and Moving the Device

Storing the Lift Chair – AX05 When Not in Use It can be disassembled and folded for storage.

Disassembly Process:

• Remove the brackets on both sides.
• Stand behind the chair to prevent tipping hazards.
• Place the removed brackets behind the chair and secure them with the orange storage cord.
• Fold the seat cushion towards the chair back and secure it with the safety belt.
• Flip up the armrests on both sides.
• Once folded, store the chair against a wall to prevent the risk of tipping and injury as shown in the illustration.

Moving the Device

• Grab the horizontal bar at the top of the folded chair.
• Tilt the folded chair.
• Move the chair using the small caster wheels.
• Note: The small wheels are for moving the chair only!

After-Sale Service

• Our product comes with a one-year warranty starting from the delivery date.
• For any issues with the Mainframe, Push Rod, Hand Controller, or Charger within this period, please contact us. Reach out through Amazon’s “Ask a Question” feature or by emailing us at [amzmaidesite@163.com] or [us-maidesite@gmail.com].
• An exclusive offer: Contact us via email to receive an electronic warranty card, which extends your warranty by an additional six months.

The following situations are not eligible for free repairs by the company:

• The warranty period has expired.
• Damage caused by improper use or failure to follow the product’s technical specifications and installation requirements.
• User disassembly or modification of the product without authorization.
• Damage to the warranty label.
• For damages caused by non-human factors, the company will make a discretionary decision on repair eligibility.

Appendix

• Hand Controller Charging Voltage: 100~240VAC 50/60Hz
• Input Voltage: 14.8VDC
• Rated Load: 1800N
• Load Speed: 5mm/s
• Minimum Height: 65mm
• Maximum Height: 565mm
• Protection Level: IPX8

Your Family Rehabilitation Partner

• If you have any questions, please contact us: atamzmaidesite@163.com
• usmaidesite@gmail.com
• 800-620-6618

Documents / Resources

| Maidesite AX05 Heavy Duty Floor Lift [pdf] User Manual
AX05 Heavy Duty Floor Lift, AX05, Heavy Duty Floor Lift, Duty Floor Lift, Floor Lift, Lift
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>