OLIGHT Olantern Music Light and Stereo Two In One Classic Camping Light User Manual

OLIGHT Olantern Music Light and Stereo Two In One Classic Camping Light

Product Information

The Olantern Music is a two-in-one classic camping light that combines a light and stereo in one device. It features white light and warm light modes with different brightness levels. The product is equipped with a rechargeable Li- ion battery pack with a capacity of 11200mAh. It also has a power bank function to charge phones and other digital devices. The Olantern Music has an indicator to display battery level and charging status. The product is designed
with user-friendly buttons and controls.

Specifications

• White Light Mode:
  • CCT: 5000~5500K
  • HIGH: 300 lumens, 100% brightness, 20 minutes runtime
  • LOW: 130 lumens, 100% brightness, 650 minutes runtime
• Warm Light Mode:
  • CCT: 2000~2100K
  • HIGH: 130 lumens, 100% brightness, 17 hours runtime
  • LOW: 10 lumens, 100% brightness, 13 hours runtime
• USB-C Charging Cable: 50% charging in 110 hours
• Indicator: 58cd
• IPX5 waterproof rating
• Weight: 980g/34.57oz
• Dimensions: (L)124(H)230mm or (L)4.88(H)9.06in

*Above data are tested per ANSI/NEMA FL 1-2009 standard in Olight’s labs for reference. The runtime may vary depending on external temperature and ventilation conditions.

Product Usage Instructions

1. Charging:

1. Before first use, unlock the product from lockout mode and fully charge it.
2. Connect the provided USB cable to a power source with a Type-C interface (power source not included).
3. Open the dust plug that shields the USB-C charging port on the product.
4. Insert the other end of the cable into the USB-C charging port.
5. A red indicator will show that charging is ongoing, and a green indicator will indicate full charge (over 95%).
6. It takes no more than 4 hours to fully charge the light.

Note:
For best charging efficiency, use an 18W or higher-capacity power source. The product will automatically unlock from lockout mode when connected to a charger.

2. Power Bank Function:

The Olantern Music can be used as a power bank to charge phones and other digital devices. Simply connect the device to the USB-C charging port using a compatible cable.

3. Product Overview:

The product features an off handle, light increase/decrease volume adjustment knob, indicator, stereo white light LED, USB dust plug protective cover, warm light LED, pause/play Bluetooth button, and interconnection button.

4. Battery Level Indicator:

• While activated (Light/Stereo/USB Discharge/Light+Stereo):

  • Green light: 30%-100% battery level
  • Red light: 5%-30% battery level
  • Flashing red light: 0%-5% battery level

• While Charging:

  • The indicator displays the remaining battery level and turns
    off 5 minutes after charging begins.

  • During charging, the indicator is red and rotates clockwise,
    then turns green when charging is complete.

  • Green light: 95%-100% battery level

  • Red light: 0%-95% battery level

5. Button Usage:

• When the button is pressed, the corresponding position of the light circle will light up in white, and it will restore when released.
• The red light will turn on during operation and automatically turn off after 5 seconds.

6. Contents:

• (EN) English manual
• (CN) Chinese manual
• (FI) Finnish manual
• (NO) Norwegian manual
• (SV) Swedish manual

Olantern Music
Light and Stereo Two-in-One Classic Camping Light

IN THE BOX

SPECIFICATIONS

• Above data are tested per ANSI/NEMA FL 1-2009 standard in Olight’s labs for reference. The tests are performed indoors under a room temperature of 25 degrees Celsius with windless conditions. The runtime may vary depending on the external temperature and ventilation conditions, and these biases may affect the results of testing.

CHARGING

The product was set to be in lockout mode before delivery. Please unlock and fully charge it before first use. Connect the provided USB cable to a power with a Type-C interface (the power is not included in this product, you can use a USB power adapter or a power bank from your cell phone and digital products, and a USB power with a power of 18W (5V/3A, 9V/2A, 12V/1.5A) or more can provide the best charging efficiency), open the dust plug that shields the USB-C charging port of the product, and then insert the other end of the cable into the USB-C charging port. Red indicator means the charging is ongoing, and green indicator means it’s fully charged (battery power is over 95%). It takes no more than 4 hours to fully charge the light.

NOTE

1. Best charging efficiency with a 18W or higher-capacity power source.
2. When the product is in lockout mode, it will automatically unlock as soon as it’s connected to a charger.

POWER BANK FUNCTION

Built-in with a 11200mAh battery pack consisting of 4 Li-ion batteries, it can charge phones and other digital devices.

PRODUCT OVERVIEW

BATTERY LEVEL INDICATOR

While activated (Light/Stereo/USB Discharge/ Light+Stereo)
The indicator will turn on for 5 seconds after any operation and will automatically turn off if there is no further activity.

While Charging
The indicator displays the remaining battery level and turns off 5 minutes after charging begins. During charging, the indicator is red and rotates clockwise, then turns green when charging is complete.

Button:
When the button is pressed, the corresponding position of the light circle will light up in white, and it will restore when it is released.

Button Lockout:
The red light will turn on during operation and automatically turn off after 5 seconds.

OPERATION INSTRUCTIONS

Lockout/Unlock: Firstly, ensure that you press and hold the knob to turn it off. Then press and hold the light button for 2 seconds to enter the lockout state, and press and hold the light button for 2 seconds again to unlock and then enter the low warm light. In the lockout state, it will be automatically unlocked when charging.

1. Knob ( )
   Knob: Press and hold the knob to turn off.
   Brightness Adjustment : A stepless dimming is adopted, the warm light becomes gradually the brightest from the lowest until the warm light is off but the white light is on at the lowest brightness, and you can continue to turn the knob until the white light is the brightest. Turn the knob anti- clockwise, the light mode and brightness are contrary to the above.

2. Music play/pause button ( )
   While the music is playing, single press to play or pause.

3. Decrease the volume
   (Press to decrease the volume.

4. Increase the volume ( )
   Press to increase the volume.

5. Light on/off button ( )
   When the Bluetooth is not connected, single press the light button to turn on or off the light. In the state of Bluetooth connection, single press the light button, and the light will operate in a cycle of on-rhythm mode-off-on.

6. Bluetooth button
   (Single press to turn on the Bluetooth function. In the state of Bluetooth connection, press and hold to disconnect the Bluetooth connection, and press it again to automatically reconnect. The default volume of the Bluetooth connection is 40%. If it is disconnected because of a long distance, it will automatically reconnect within 8 minutes. After turning on the Bluetooth for 10 minutes, it will automatically turn off if not connecting to the Bluetooth.

7. Interconnection button ( )

   • TWS mode
     On/Off: When Bluetooth is on, single press to turn on or off the TWS function (prompt tone). If the TWS function is not successfully paired within 30 seconds after it is turned on, it will be automatically turned off. The device will be memorized after pairing successfully.
     TWS connection method 1: When both products turn on Bluetooth and are not connected to the mobile phone, press the interconnection button of any product to start pairing, and then connect to the mobile phone after pairing is complete.
     TWS connection method 2: Connect any one product to a mobile phone, and press the interconnection button to enter the TWS mode. And then the other one turns on Bluetooth.

   • Stereo broadcast mode:(This function supports the interconnection of 100+ stereos.)
     Turn on broadcast mode: Firstly, ensure that Bluetooth is on, then connect the host device to your mobile phone. Finally, press and hold the interconnection button to enter broadcast mode.

WARRANTY

Within 30 days of purchase: Contact the original seller for repair or replacement. Within 2 years of purchase: Contact Olight for repair or replacement. This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an Authorized retailer or Olight itself.

• USA Customer Support: cs@olightstore.com
• Global Customer Support: contact@olightworld.com

Visit www.olightworld.com to see our complete product line of portable illumination tools.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
   WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE
 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

References

• Olight | Illuminate Your World.
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>