Flexispot E7QB Din 4 Leg Standing Desk Instructions

Flexispot E7QB Din 4 Leg Standing Desk

Diagram of Components

Parts Included

Accessory Package

Please contact customer service if there are any accessories or tools missing.

Specifications

• Max. Load Capacity 440 lbs (200 kg)
• Max. Speed 1.5″/s
• Adjustable Height Range 23.8″ – 49.4″ (605 – 1255mm)
• Wide Expand 43.3″ – 74.8″ (1100 – 1900mm)
• Length: 70.9″ -94.5″ (1800mm – 2400mm)
• Applicable Desktop Size
• Width: 31.5″ 35.4″ 800mm – 900mm

Installation Process

Pre-installation Guide

Step 1

Attach the side brackets to the beam

Tips:
Use the two small blue boxes in the package to cushion the beam for easier installation.

Step 2

Adjust the length of the supporting beam

• Turn over the frame. Loosen the four screws of the frame and stretch the frame.
• When there are holes on the tabletop, the beams are stretched to align with the holes; when there are no holes on the tabletop, the support plates on both sides are installed close to the edge of the tabletop.

Step 3

Affix the tabletop
Fix the screws in the sequence of:

Step 4
Install the leg columns

Step 5
Attach the feet
Fasten the screws as seen.

Step 6
Fix the keypad

Tips:
You can install the keypad on either dege depending on your hand preference.

Step 7
Attach the control box

Step 8
Connect the wires
Tips:
Connection of the same color.

Step 9

Install the string net hook
When the table board has holes, the position of the hook is charity according to the holes;
When the table board has no holes, the net can be laid flat to determine the position of the hooks.

Step 10
Attach cable management net

Step 11

How to Use-1

Attention
Please make sure that there are no obstacles in the process of raising and lowering the table, and ensure that all lines are long enough to move the table up and down.

Saving the Height
Press “M”. The display will show “5-” .

Then press the button “5- I”, “5-2” or “5-3”. The current height will be saved to the corresponding position.

After saving the height, you can press the “i”,”” or “3”, and the desk will automatically adjust to the corresponding height position saved before.

How to Use-2

Adjust the sensitivity of the anti-collision function

To adjust the sensitivity of the anti-collision function, keep pressing””” and “v” simultaneously for 5s to alternate among level 1, 2, 3 or off.

The indicator levels are as follows:

• “A-1 “: low sensitivity

• “A-2”: medium sensitivity

• “A-3”: high sensitivity

•  “A-0”: switch off the anti-collision
  ( Before switching off the function please make sure there aren’t any object under the desk to prevent potential damage.)

• When the LCD display shows” RSr” or” rSI: “, press and hold the “v” button until the desk reaches its lowest height. This height will be displayed on the keypad, which is then reset.

• If the exception code E0 1 or E0 2 occurs, please retry after 18 minutes.

• If the “v” button doesn’t work, check the cable connection, and switch off the power for at least 1 Os. Switch on the power, press the “v” button and the LCD display will show “Rsr” or “rSI:”.

• Then reset by pressing the “v” button.

Troubleshooting

This list is used for checking and solving common faults and errors. Please contact the manufacturer if problem you encounter is not on the list below.

Recycling and Disposal

This product cannot be disposed of as household waste. To prevent damage to the environment, this product should be recycled. Please use the relevant recycling systems available to you or contract the distributor or manufacturer for recycling assistance.

Attention

• Power supply: AC1 00V – 240V, frequency 50/60HZ;

• Working environment: 32° – 104° F;

• Before cleaning, you have to unplug the power supply cable. Clean with a slightly damp cloth to wipe away the surface dust. Keep all electrical components away from liquids. Do not damage the connection line and keep the plug in a safe position.

• Inside the control box, there are electronic components, metal parts, plastic parts, wires and so on. They should be disposed in accordance with the local laws and regulations. They cannot be disposed as household waste.

• Before using the product, please make sure the product has been installed correctly.

• Before starting use of the product, please read the instructions to fully understand all the product’s functions and settings.

• Keep children away from electric height-adjustable desks, control units and handsets.
  Manufacturer is not responsible of any damages that result from children’s unpredictable behaviour.

• Slight noise caused by the multi wedge belt or brake system will not impact the use of this product.

• Do not use corrosive or abrasive materials to clean this product and please dispose of cleaning solutions in an environmentally friendly manner.

• Understand the risks associated with using this product. Children or those with cognitive impairment should not use this product without supervision.

• If the power supply cord is damaged or broken, it must be replaced by the manufacturer or a relevant specialist to avoid any injuries.

• Please operate in a clean and safe environment. For example, do not left around your tools. And always be careful to deal with packaging materials, in order to avoid any kinds of possible danger. Potential chocking risk exists when children play with plastic bags!

• If necessary, retain the original package for future transportation.

FlexiSpot Limited Warranty

This limited warranty offered byFlexiSpot covers defects in material or workmanship in new FlexiSpot products. This warranty extends to the original purchaser only and is non-transferable. Only consumers purchasing FlexiSpot products from authorized FlexiSpot retailers or resellers may benefit from our limited warranty.

• What is Covered?
  The FlexiSpot limited warranty covers our products against defects in material or workmanship as follows:

  • FlexiSpot Height Adjustable Desk Frames
    All height adjustable desks purchased on or after April 1, 2022 include a 15-years warranty for all metal and mechanical parts and components, including motors and electrical components.

  • FlexiSpot Sit-Stand Desktop Workstations
    All standing desks purchased on or after October 5, 2016 include a 5-year warranty for the frame, medium-fiber desktop and mechanisms. ·FlexiSpot Desk Bikes All desk bikes purchased on or after October 5, 2016 include a 3-year warranty for the frame, and a 1-year warranty for the electronics and other mechanisms.

  • FlexiSpot Mini Steppers
    All desk bikes purchased on or after October 5, 2016 include a 1-year warranty for the frame, and other mechanisms.

  • Accessories
    All monitor mounts purchased on or after October 5, 2016 include a 5-year warranty for the arms, 3-year warranty for gas spring system and mechanisms.

• What are your Remedies?
  FlexiSpot will replace at no charge to the consumer the defective parts only or, at FlexiSpot’s option, replace any product or part of the product that is defective because of improper workmanship and/or material, under normal installation, use, service and maintenance. If FlexiSpot is unable to provide a replacement and repair is not practical or cannot be completed in a timely fashion, FlexiSpot may elect to refund the purchase price in exchange for the return of the product. In the rare event that your FlexiSpot product is defective, we will provide you with a replacement item shipped at no cost to you within the continental United States. The shipping method for replacement products is FedEx Ground, but expedited shipping is available if you choose to pay the additional expense. In addition, you will need to pay the shipping costs if any products need to be shipped to you at an address outside the continental United States.
  REPAIR OR REPLACEMENT (OR, IN LIMITED CIRCUMSTANCES, REFUND OF THE PURCHASE PRICE) AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDYOF THE PURCHASER. FLEXISPOT NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO CREATE FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH THIS

• What is Not Covered?
  Our limited warranty does not cover any problem that is caused by

  • Conditions, malfunctions or damage not resulting from defects in material or workmanship.
  • Conditions, malfunctions or damage resulting from normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration.
  • Accessories, connected materials and products, or related products not manufactured by FlexiSpot.
  • Conditions, malfunctions or damage resulting from failure to follow the instructions and guidelines relating to the product’s intended use. Our limited warranty is void if a product is returned with removed, damaged or tampered labels or any alterations (including removal of any component or external cover)

• How to File a Claim?
  In order to receive the benefit of our limited warranty, you need to process your claim in compliance with the terms of this limited warranty and follow proper return procedure. To request warranty service, please contact customer service via email at contact@FlexiSpot.com or toll free at 855-421-2808. You will need to provide the sales receipt or other evidence of the date and place of purchase for your FlexiSpot product.

• Implied Warranties and Limitation of Damages
  EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES (INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY, AND FLEXISPOT SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR REVENUE, RESULTING FROM ANY BREACH OF EXPRESS OR IMPLIED WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, EVEN IF FLEXISPOT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some jurisdictions do not allow limitations on the duration of an implied warranty or the exclusion or limitation of special, indirect, incidental or consequential damages, so the above limitations or exclusions may not apply to you.

• Governing Law
  This Warranty shall be governed by the laws of the State of California, USA, without giving effect to any conflict of laws principles that may provide the application of the law of another jurisdiction.

• How State Law Applies
  This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>