RURIS 3024E Battery Powered Chainsaw Instruction Manual

RURIS 3024E Battery Powered Chainsaw

Specifications

• Power Source: Electric brushless motor
• Battery: Li-Ion 20V 4 Ah (not included)
• Total Power: 80 Wh
• Transmission Tube Diameter: 26 mm, rigid, modular
• Net Weight with Accessories: 3.8 kg

Product Usage Instructions

Assembly
Follow the steps below for proper assembly of the brushcutter:

1. Mount the handles as shown in Fig. 1.
2. Important: Do not operate the brushcutter without the protective guard in place.
3. For attaching/detaching the cutting disc and autocut unit, ensure the harness safety is positioned under the user’s armpit.

Operating the Brushcutter
There are two main cutting methods:

• Straight Cutting Method: Ensure to cut along the edge of the cutting surface to avoid accidents.
• Autocut Method: Select the appropriate type of cutting line for the surface. Operate the autocut at maximum motor speed.

Storing the Equipment
Properly store the brushcutter in a dry and safe place when not in use.

Frequently Asked Questions (FAQ)

1. Q: Is the battery included with the RURIS 3024E brushcutter?
   A: No, the Li-Ion 20V 4 Ah battery is not included and needs to be purchased separately.

2. Q: What safety precautions should I take when operating the brushcutter?
   A: Always wear protective gear such as helmets, gloves, and boots. Follow all safety labels and instructions provided in the user manual.

3. Q: Can I use any type of cutting line with the autocut feature?
   A: No, you should choose the cutting line type suitable for the specific surface you are cutting.

INTRODUCTION

Dear Client!
Thank you for your decision to purchase a RURIS product and for your trust in our company! RURIS has been on the market since 1993 and during all this time it has become a strong brand, which has built its reputation by keeping promises, but also by continuous investments aimed at helping customers with reliable, efficient and quality solutions.
We are confident that you will appreciate our product and enjoy its performance for a long time. RURIS does not offer its customers only machines, but complete solutions. An important element in the relationship with the customer is advice both before and after the sale, as RURIS customers have at their disposal a whole network of partner stores and service points.
To enjoy the purchased product, please read the user manual carefully. By following the instructions, you will be guaranteed a long use.
The RURIS company is continuously working on the development of its products and therefore reserves the right to modify, among other things, their form, appearance and performance, without having the obligation to communicate this in advance.
Thank you once again for choosing RURIS products!

Information and support customers :
Phone: 0351.820.105
e-mail: info@ruris.ro

SAFETY INSTRUCTIONS

LABELS ON THE MACHINE

SAFETY INFORMATION
Before using the mower, read and follow all warnings, cautions and instructions in this manual.
NOTE: The following safety information is not intended to cover all possible conditions and situations. Read the entire user manual. Failure to follow instructions and safety information can result in serious injury or death.

GENERAL SAFETY RULES
SAVE THESE SAFETY INSTRUCTIONS.
WARNING: Do not operate this mower until you have read this instruction manual and are familiar with the safety, operation, and maintenance instructions.

WORK AREA SAFETY

• Keep the work area clean and well lit.
• Do not use power tools in explosive atmospheres, such as in the presence of liquids, gases or fuel vapors. Power tools create sparks that can ignite fuel gases or vapors.
• Keep children and bystanders away. All visitors and pets must be kept a safe distance from the work area.
• Do not allow children or untrained persons to use this machine.
• Do not expose power tools to rain or moisture. If water gets into a power tool, it will increase the risk of electric shock.
• Do not handle the plug or tool with wet hands.
• Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.
• Always wear goggles and a protective mask.
• Clip long hair above shoulder level to prevent it from getting caught in moving parts.
• Do not expose the machine to rain, store it indoors.
• Do not operate in low light conditions.
• Keep all parts of your body away from any moving part of the machine.
• Wear long pants, safety boots and gloves. Avoid loose clothing and jewelry that can get caught in moving parts of the machine.
• Do not force the machine.
• Do not use the equipment barefoot or with sandals or inappropriate footwear. Wear protective footwear.
• Maintain a firm stance and balance when using the mower.
• Do not use the tool if the switch is not functional.
• Keep all bystanders, children and pets at least 50 meters away. • Do not use this unit when you are tired, ill, or under the influence of alcohol, drugs, or medication.
• Keep all parts of your body away from moving parts and all hot surfaces of the tool.
• Check the work area before each use. Remove all objects such as stones, broken glass, nails, wire or string that can be thrown or caught in the machine.
• Use only original spare parts and accessories from the manufacturer. Use of any other part may create a hazard or cause damage to the product.
• Do not charge the battery tool in the rain or in a wet place. This rule will reduce the risk of electric shock.
• Tools with batteries must not be connected to an electrical outlet; so they are always in working order. Be aware of potential hazards even when not using the cordless tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire or serious personal injury.
• Disconnect the battery before servicing or cleaning the machine.
• Use only RURIS batteries
• Do not dispose of batteries in fire, the cells may explode. Consult local regulations for possible special disposal instructions.
• Do not open or damage batteries. The released electrolyte is corrosive and can cause skin and eye irritation. May be toxic if swallowed.
• Do not place battery tools or their batteries near fire or other heat sources. This will reduce the risk of explosion.
• Do not crush, drop or damage the battery. Do not use a damaged battery or charger.
• Do not point the tool at people or pets.
• When not in use, the tool should be stored indoors in a dry, locked area out of the reach of children.
• Handle the tool with care. Keep the tool clean for high performance. Follow the instructions for proper maintenance.
• To reduce the risk of electric shock, do not expose the machine to rain, do not use it on wet surfaces. Store it indoors.
• Keep these instructions. Refer to them frequently and use them to train others who may use this machine.
• Keep children away from the work area and under the supervision of a responsible adult.
• Do not allow children to operate the tool.

PERSONAL SECURITY

• All persons, children and pets must remain a safe distance from the work area.
• Do not use the tool when you are tired or under the influence of drugs, alcohol or medication.
• Do not use the tool for any work other than that for which it is intended.
• Do not wear loose clothing or jewelry when using the tool.
• Wear glasses with side protection.
• Keep all parts of your body away from any moving parts.
• Avoid accidental start. Make sure the switch is in the off position before connecting the battery or when transporting the tool.
• Do not use the tool

BRUSHCUTTER OVERVIEW

1. Electric motor
2. Horns
3. Transmission rod
4. Protection device
5. Reducing head
6. Horn clamp
7. Throttle lever
8. Knife function
9. Autocut function
10. On/off button.
11. Battery level

The images are in character informative , the supplier ISI book the right to bring MODs structure and function against the machine present in the this manual.
RURIS batteries benefit from the function “α UP- Innovation RURIS ” . This one function it helps the battery when it reaches the critical discharge threshold . Ruris came up with an innovation in the system the cells inside the battery , through which the battery can Reload after a period long time it was discharged . Thus , RURIS users can enjoy the reliability and innovation of RURIS.
After storage , it is recommended loading at a interval of 6 months – 1 year

TECHNICAL DATA

ASSEMBLY

Before mounting and putting into operation, you must ensure that the battery mower is correctly assembled according to the component plan and follow the instructions in this manual. Only then can you proceed to actual commissioning.mounting the horns Loosen the screws located on the clamping flange , via scrolling , until When this is free from the thread, then FIX the horns in the working position . ( fig. 1).

Fig. 1
joining transmissions
For transmission mods that come split in the two segments, these must combined with help fixing clamps and the lock nut ( fig 2 ).

mounting protective device
adapt your protection in the fixing points and squeeze firm the screws .
This has both the role of a protect the user of hard bodies that can ricochet in time use , as well as the role of load limiter .

Attention ! Do not use the brushcutter without the protective device (guards). Mounting-dismounting of the cutting disc and the auto-cut
In order to proceed properly, you will need to have the following necessary tools at hand: the allen-locker and the handle wrench provided with the mower.
The assembly-disassembly order is shown in fig. 4
Use the locking hex provided with the mower and position it in the locking hole of the reducer head and in the locking hole of the spacer in fig. 4 pos. 5.
Using the wrench provided with the mower, secure the lock nut and turn counterclockwise to tighten, or clockwise to loosen.
The cutting disc with 3 teeth (pos. 4 Fig. 4) can be mounted on any part having double sharpening.

Check that the whole assembly is correctly mounted and that the disc is firmly tightened without axial or transverse play.
When mounting the auto-cut, items 1, 2, 3 and 4 from fig. 4 are not used. The locking washer (pos. 5, fig. 4) is used, which helps to lock the shaft of the reducer head, and the auto-cut is then threaded, counter-clockwise, by hand, helping us by the lock and tighten strongly.
If you fail to do so, you must immediately go to the nearest Ruris authorized service point to have this problem fixed.

Fitting the harness
To fit the harness you will need to position it on your shoulders and then secure it.
The harness can be easily fixed on the user’s body by means of quick-type adjustment elements, without the user losing time or suffering discomfort during operation.
With quick adjustment, the user can start working immediately.
To be able to position the mobrushcutter wer correctly in the harness, make sure that it is balanced and does not touch the ground .

To balance the mower in relation to the harness and the height of the user, you will need to perform the following maneuvers:

• make sure the harness safety is located below the user’s hip.
• position the chainsaw in the safety of the harness and leave it free
• if the mower is not balanced and touches the ground with the cutting disc or the mower has a tendency to lean towards the engine, you will have to reposition the fixing system located on the transmission rod to the engine or the cutting disc until you find the point balance of the scythe. In this case, exploitation will be done easily without supporting the bruschutter on your hands.

COMMISSIONING

Before putting the mower into operation, you must ensure that the following conditions are met:

• within a radius of 15 meters on either side of the brushcutter, there are no people or objects with which it could come into contact.
• the mower is seated in the position horizontal on the ground.
• cables are correct mounted .
• the horns are correct mount and fixed.
• the reducer head has petroleum jelly graphitized .
• DISC cutter is mounted and fixed correct , sure with safety nut .
• the protective guard is mounted correct
• all bolts the mowers are tight firmly

Checking disc cutter and of the car .
Careful! When mounting the cutting disc, use the lock nut to unscrew the clamping nut clockwise. After installing the cutting disc, make sure that the nut is well tightened and the cutting disc is well fixed, guided and has no deformations or cracks on its surface, otherwise replace it.

EXPLOITATION OF THE BRUSHCUTTER

RURIS brand shoulder chainsaws are products that allow you to easily choose the mowing mode, without having to perform successive adjustment or maintenance maneuvers. Brushcutter create a unitary body with the user and provide maximum comfort and perfect operation.
In order to be able to use the brushcutter in optimal working conditions, you will need to check before starting the mowing operation if there are objects, wood stumps, stones, wires, flies, etc. on the mowing surface. objects with which the cutting disc may come into contact.
If you find such objects you will have to remove them from the surface to be mowed. At the same time, unevenness or other elements that could endanger your safety during exploitation will have to be highlighted by markings in those areas.
Careful! To be able to operate the chainsaw safely, you will have to read the manual and take into account the markings on the parts of the brushcutter.

Make sure that before starting the operation, there are no people or animals within a radius of at least 15 meters that you could injure because at the maximum speed of the cutting disc through contact with the gravel in the ground or other objects they can be projected .
After you have started the mower and positioned it in the safety of the harness, you can proceed to its operation. For your safety, avoid contact of the disc with stones or hard objects.
Actuation of the transmission is done by operating the accelerator lever at maximum, during the mowing process, without fluctuations that create shocks in the transmission and cause its premature wear.

Mowing methods

The spiral or figure 9 mowing method

• Start mowing from the outside of the surface, also choose your mowing mode, you can mow to the right or left. It is recommended not to mow in both directions, as you risk stepping on the mown hay in the direction of return, according to fig. 6

Mowing method _ Right

• Before you start mowing, set a guide point to which you are going to move. Mowing can be done by orienting the handles consecutively to the right or left depending on the actual mowing mode.

Slope or ramp mowing method

• In order to mow in the safety position your perpendicular on the slope axis and Support your ever on FOOT FROM ramp , according to fig. 8

Mowing method used for clearing (fig. 9)

• Deforestation is always done with a perfectly chosen disc, depending on the shrubs to be deforested.
• For safe clearing you must always start from the edge of the mowing area and never inside this area to avoid possible accidents.

Mowing method with help the autocut

• To use the autocut, you must choose the type of thread perfectly for the surface to be mowed.
• The wire that equips the autocutter will finely chop the grass.
• The autocut can be successfully used in areas with obstacles, for ventilation of trees, in areas of joints with curbs.

To handle the wire, you will have to operate the autocut by pressing it on the ground or by lightly hitting it on the ground, according to fig. 10ground or through hitting its ease from the ground, according to fig . 10

This wire handling operation will be done at full engine speed.

MAINTENANCE

Before cleaning, inspecting or repairing your mower, make sure the engine is cool. Disconnect the battery to prevent accidental starting.
The user can only carry out maintenance and service interventions that are described in this manual. More complex interventions are carried out in an authorized service workshop.
In order to be able to sharpen the cutting disc, as well as for other interventions, it is advisable to go to an authorized RURIS service.
Certain parts of the transmission work in petroleum jelly. It is necessary to top up with petroleum jelly and check the reducer head. The amount of petroleum jelly in the reducer head must be checked before each use.
If the cutting disc does not cut properly, it can be sharpened or eventually replaced.
For any problems or misunderstandings on how to work with the machine, contact the authorized RURIS distributor.
Keep the mower, especially the ventilation holes, clean. Never spray water on the body of the device!
Never clean the mower and its components with solvents, flammable or toxic liquids. Clean it with a damp cloth.
Use only original accessories and original spare parts. Use of other spare parts may result in accidents/injury to the user.
Please contact an authorized RURIS service if you need accessories or spare parts.

STORAGE OF THE EQUIPMENT

If you do not use the chainsaw for a longer time (over a week), proceed as follows: Clean the mower.
Store in a dry place out of the reach of children.
The chainsaw must be stored in dry places with a roof and protected against moisture. Lubricate all active metal parts with petroleum jelly.
Do not store the mower near flammable areas.
Do not dispose of electrical equipment, industrial electronics and components in household waste! Information on WEEE. Considering the provisions of OUG 195/2005 – regarding environmental protection and O.U.G. 5/2015. Consumers will consider the following indications for handing over electrical waste, specified below:

• Consumers have the obligation not to dispose of waste electrical and electronic equipment (WEEE) as unsorted municipal waste and to collect this WEEE separately.
• The collection of these named wastes (WEEE) will be carried out through the Public Collection Service within each county and through collection centers organized by economic operators authorized for the collection of WEEE. Information provided by the Environmental Fund Administration www.afm.ro or the journal of the European Union.
• Consumers can hand in WEEE free of charge at the previously specified collection points.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>