EVERLAST 4405E Single Mouth Guard Instructions
- June 17, 2024
- EVERLAST
Table of Contents
MOUTHGUARD
USER INSTRUCTIONS AND FITTING GUIDE
4405E Single Mouth Guard
THESE INSTRUCTIONS AND PACKAGING CONTAIN IMPORTANT INFORMATION RELATING TO
THIS PRODUCT AND ITS USE, AND MUST THEREFORE BE RETAINED FOR FUTURE REFERENCE.
This mouth guard is designed to provide limited protection against minor
injuries caused by impacts in Martial Arts. If used correctly, the mouth
guards that are detailed within this user information booklet can prevent or
reduce the severity of injuries associated with contact sporting activities.
This user information is applicable to the following products:
Product Name & Code| Guard Type Classification| Sizes
Available| Impact Performance
---|---|---|---
SINGLE MOUTH GUARD
4405E, 4405BE| Type 2| One Size: Adult 14+| 1
DOUBLE MOUTH GUARD
4410BE 4410E| Type 2| One Size: Adult 14+| 1
EVERGEL MOUTH GUARD
1400008, 1400009| Type 2| One Size: Adult 14+| 3
EVERSHIELD SINGLE MOUTH GUARD
1400000, 1400003| Type 2| One Size: Adult 14+| 3
EVERSHIELD DOUBLE MOUTH GUARD
1400004, 1400007| Type 2| One Size: Adult 14+| 3
WARNINGS:
-
Use the mouthguard as directed, misuse can dangerously reduce performance.
No mouthguard can offer full protection against all injuries. These mouthguards cannot guarantee protection against injuries caused by significant impacts sustained during sportingactivities and cannot prevent head injuries or fatalities. -
The mouthguard is custom fit for the ser’s mouth. Do not to allow any person other than the named user to use your mouthguard
-
These mouthguards are not considered to be suitable for use in the following activities: ice hockey.
-
After molding to teeth, do not chew your mouthguard. If the mouthguard becomes worn due to chewing, it’s protection, fit durability may be greatly reduced and may no longer provide adequate protection to the end user.
-
Do not to use mouthguards showing wear, cracks, separation of layers or splits. If your mouthguard shows any signs of damage throw it away and obtain a replacement immediately.
-
For wearers whose jaw growth, primary dentition exfoliation and secondary dentition eruption, is still in progress, the fit of the guard must be checked regularly during this period by a responsible parent or guardian. If the mouthguard is found to be loose or tight fitting to the teeth & gums, it must be replaced immediately. These mouthguards should not be used with braces or other dental devices, unless approved by the person fitting the brace. You must consult a dentist or orthodontist fitting a brace or other device to the teeth concerning the suitability of this or any other mouthguard
-
The constituent and materials used in the construction of these mouthguards are not considered to cause sensitisation or allergic reaction. However, if any pain or discomfort is felt during the use of this mouthguard, please consult a doctor or dental professional as appropriate.
-
The retailer and manufacturer will be absolved of all liability in respect of any personal injury o other claims arising from the use of the products other than are intended, including unauthorised user modifications, actions or exposures.
-
Do not make any alterations, expose to extreme temperatures, petrochemicals, solvents nor their fumes, or treat in any manner that is not the intended use of the mouthguard as this may significantly reduce their level of protection. Avoid any contamination of the materials in the mouthguard
FITTING INSTRUCTIONS : When choosing a mouthguard, choose a guard that is
of the correct type and size based on the age range information provided by
the manufacturer. Please ensure that the mouthguard you have chosen is of the
correct type and performance level related to the intended sport.
TO FIT A MOUTHGUARD YOU WILL NEED THE FOLLWING ITEMS:
Metal tongs, boiling water, cold water, a mirror, and a timepiece that
displays seconds.
INSTRUCTIONS FOR SELF FITTING, PLEASE READ ALL STEPS BEFORE COMMENCING.
Using a mirror place the guard in your mouth over upper teeth and practice the
molding movements.
Boil water. Remove water from heat source. Let the water sit for 30 seconds
then drop the mouth guard into the water for 70 seconds. Do not let mouthguard
sit in water longer than 90 seconds. Do not keep the mouth guard in hot water
for too long, as the shape will distort
Use the metal tongs to remove mouth guard from the water and dip in cold water
for 1 second
Using a mirror to line up the mouth guard center with your front teeth,
promptly place the mouth guard around your upper teeth.
Close the teeth quickly but gently to ensure an even bite. Do not bite through
the plastic. Push mouth guard up and in towards teeth with fingers, at the
same time gently suck all air and water out until a tight fit forms around the
upper teeth.
Hold in this position for about 30 seconds.
Remove the guard and place in cold water for 1 minute.
Replace the guard into your mouth and if the fit is not comfortable, repeat
steps 2 to 7 to remold For smaller adult mouths, the guard can be shortened by
trimming the ends with sharp scissors.
MAINTENANCE: It is very important to check your mouthguards regularly for
any signs of damage which may reduce the level of protection being offered by
the protector. If the mouthguard shows any signs of wear, cracks, separation
of layers or splits throw it away and obtain a replacement immediately.
Dependent upon the regularity and severity of use, your mouthguard should be
replaced after a year of use, although this may vary, and products should be
visually inspected prior to each use for damage or other irregularities as
outlined above and checked for fit. Used products should be disposed of in
accordance with the local and national environmental regulations at an
appropriate land fill site. Further information regarding these regulations
can be obtained from your local authorities.
STORAGE: The mouthguard box provided with your chosen product provides a
secure, clean storage for your mouthguard. The mouthguard should always be
stored in the mouthguard box when ot in use. Be sure to use the storage box
when transporting you mouth guard to and from sports events. Do not place
beneath heavy items that may damage the box or mouthguard. Do not expose the
mouthguards or boxes to chemical substances, hazardous substances, of fire,
which may contaminate the product and have an adverse effect on the level of
protection offered by these products.
REPAIRS AND MODIFICATIONS: The manufacturer cannot guarantee the
performance of the product or the level of protection that is offered by the
protector if modifications or repairs are carried out on this product by the
user.
CLEANING After each use, the mouthguard and mouthguard box should be
washed by rinsing with fresh water (no hotter than 35°C / 95°F) or mouthwash.
Do not use detergents or solvent cleaners. Allow to air dry away from sunlight
or direct heat sources before storing. Wash case separately with soap and
water.
everlast.ca
Everlst™, the Econ device™, and GREATNESS IS WITHIN™aretrade marks of Everlast
Worl’s Boxing Headauarters Corparation and used under icense by ACI Brands nc.
MANUFACTURED BY: EVERLAST SPORTS IFG. CORP. 1900 HIY DD NOBERLY, 65270
INPORTED BY: ACI BRANDS INC. 2616 SHERIDAN GARDEN DR., OAKVILLE, OTARID
LE) 722, CANADA
ADOS337-PO0DO1A00IN-0823
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>