RURIS SF1345e Battery Leaf Blower User Manual
- October 30, 2023
- RURIS
Table of Contents
RURIS SF1345e Battery Leaf Blower
INTRODUCTION
Dear Client!
Thank you for your decision to purchase a RURIS product and for your trust in
our company! RURIS has been on the market since 1993 and during all this time
it has become a strong brand, which has built its reputation by keeping
promises, but also by continuous investments aimed at helping customers with
reliable, efficient and quality solutions. We are confident that you will
appreciate our product and enjoy its performance for a long time. RURIS does
not offer its customers only machines, but complete solutions. An important
element in the relationship with the customer is advice both before and after
the sale, as RURIS customers have at their disposal a whole network of partner
stores and service points.
To enjoy the purchased product, please read the user manual carefully. By
following the instructions, you will be guaranteed a long use. The RURIS
company is continuously working on the development of its products and
therefore reserves the right to modify, among other things, their form,
appearance and performance, without having the obligation to communicate this
in advance.
Thank you once again for choosing RURIS products!
SAFETY INFORMATION
SAVE THESE SAFETY INSTRUCTIONS.
WARNING: Do not use this blower until you have read this instruction manual and are familiar with the safety, operation, and maintenance instructions.
WORK AREA SAFETY
Keep the work area clean and well lit.
Do not use power tools in explosive atmospheres, such as in the presence of liquids, gases or fuel vapors. Power tools create sparks that can ignite fuel gases or vapors.
Keep children and bystanders away. All visitors and pets must be kept a safe distance from the work area.
Do not allow children or untrained persons to use this machine.
Do not expose power tools to rain or moisture. If water gets into a power tool, it will increase the risk of electric shock.
Do not handle the plug or tool with wet hands.
Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.
Always wear goggles and a protective mask.
Clip long hair above shoulder level to prevent it from getting caught in moving parts.
Do not expose the machine to rain, store it indoors.
Do not operate in low light conditions.
Keep all parts of your body away from any moving parts of the machine.
Wear long pants, safety boots and gloves. Avoid loose clothing and jewelry that can get caught in moving parts of the machine.
Do not force the machine.
Do not use the equipment barefoot or with sandals or inappropriate footwear. Wear protective footwear.
Maintain a firm stance and balance when using the blower.
Do not use the tool if the switch is not functional.
Keep all bystanders, children and pets at least 50 meters away.
Do not use this unit when you are tired, ill, or under the influence of alcohol, drugs, or medication.
Keep all parts of your body away from moving parts and all hot surfaces of the tool.
Use only original spare parts and accessories from the manufacturer. Use of any other part may create a hazard or cause damage to the product.
Do not charge the battery tool in the rain or in a wet place. This rule will reduce the risk of electric shock.
Battery powered tools must not be plugged into an electrical outlet; so they are always in working condition. Be aware of potential hazards even
when not using the cordless tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire or serious personal injury.
Disconnect the battery before servicing or cleaning the machine.
Use only RURIS battery.
Do not dispose of batteries in fire, the cells may explode. Consult local regulations for possible special disposal instructions.
Do not open or damage batteries. The released electrolyte is corrosive and can cause skin and eye irritation. May be toxic if swallowed.
Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion.
Do not crush, drop or damage the battery. Do not use a damaged battery or charger.
Do not point the tool at people or pets.
When not in use, the tool should be stored indoors in a dry, locked area out of the reach of children.
Handle the tool with care. Keep the tool clean for high performance.
PERSONAL SECURITY
All persons, children and pets must remain a safe distance from the work area.
Do not use the tool when you are tired or under the influence of drugs, alcohol or medication.
Do not use the tool for any work other than that for which it is intended.
Do not wear loose clothing or jewelry when using the tool.
Wear safety glasses.
Avoid accidental start. Make sure the switch is in the off position before connecting the battery or when transporting the tool.
USE AND MAINTENANCE
Familiarize yourself with the tool. Read the manual carefully, learn about its applications and limitations, and specific potential hazards associated with this machine.
Check for misaligned or jammed moving parts, broken parts, and any other defects that could affect the operation of the tool. If damaged, repair the power tool before using it.
Do not force the power tool. Use the power tool correctly for your application.
Disconnect the battery from the power tool before making adjustments, changing accessories, or storing power tools.
Check the operation of the tool before using it.
Do not use the tool if it does not have a legible warning label.
Use the power tool in accordance with these instructions, taking into account the working conditions. Using the power tool for operations other than those intended could result in a hazardous situation.
Battery safety rules
Battery powered tools must not be plugged into an electrical outlet; therefore, they are always in working order. Following this rule will reduce the risk of electric shock, fire or serious personal injury.
WARNING: When transporting or servicing the unit, always disconnect the battery.
Service
Tool maintenance should only be performed by qualified personnel. Service or maintenance performed by unqualified personnel may increase the risk of accidents. When servicing a tool, use only original spare parts.
Some of the following symbols may be used on this device. Please study them and understand their meaning. The correct interpretation of these symbols will allow you to use the machine better and safer.
Symbols on the machine
The technical label on the car may show some symbols. This is important information about the product or instructions on its use.
| Read the manual.
---|---
| Wear hearing protection.
| Careful! Danger.
| Careful! Debris may be ejected from the outlet.
| Careful! Keep your distance.
| Do not expose to rain.
| Before maintenance, remove the battery.
TECHNICAL DATA
Motor | Electric, with brushes |
---|---|
**Battery** | Li-Ion 40V 5 Ah (not included in the product) |
**Total Power** | **** Pw = 200 Wh |
**Speed** | **** 15000rpm |
**Handle vibrations** | **** 1.86 m/s 2 K=1.5 m/s 2 |
**Maximum air speed** | **** 41 m/s |
**Maximum air volume** | **** 620m³/h |
**Turbo function** | **** YES |
**Number of gears** | **** 2 |
**Weight** | 2.5 kg |
The battery benefits from the “α UP-Innovation RURIS” function. This function helps the battery when it reaches the critical discharge threshold. Ruris came up with an innovation in the system of cells inside the battery, through which the battery can be recharged after a long period of time in which it has been discharged. Thus, RURIS users can enjoy the reliability and innovation of RURIS. After storage, charging is recommended at an interval of 6 months – 1 year.
OVERVIEW
- Handle
- Variable speed button
- Battery (not included)
- Battery lock button
- Tube locking device
- Blower tube
- Blower tube outlet
- ON/OFF switch
The images are informative, the supplier reserves the right to make structural and functional changes to the machine presented in this manual.
BLOWER TUBE
The blower tube can be installed on the blower without using any tools.
assembling.
To prevent accidental starting that could cause serious personal injury,
always remove the battery from the blower when assembling parts.
FITTING THE TUBE
Fig 2.
- Insert the blower tube over the outlet.
- Slide the blower tube over the housing outlet until it locks.
You can use this blower for the purposes listed below:
- Cleaning surfaces such as driveways and driveways.
- Keeping driveways, garages and decks clear by removing leaves, pine needles and other small debris.
It is not intended for use other than those listed above.
NOTE: To avoid serious personal injury, always remove the battery and keep hands away from the variable speed trigger when carrying or carrying the tool.
INSTALLING THE BATTERY
Fig 3.
Insert the battery into the blower. Align the raised rib of the battery with the grooves in the blower battery port.
Make sure that the lock button on the bottom of the battery snaps into place and that the battery is secured in the blower before starting operation.
REMOVING THE BATTERY
- Release the variable speed trigger to stop the blower.
- Press and hold the button on the bottom of the battery.
- Remove the battery from the blower.
START/STOP ELECTRO BLOWER
Fig 4.
- To start the blower, turn the switch on, then press and hold the variable speed trigger button. The harder it is pressed, the stronger the air speed.
- To stop the blower, just turn off the switch.
Batteries are always in working order. Therefore, the switch should always be in the OFF position when not in use or carried near you.
BLOWER OPERATION
Fig 5.
To keep the debris from spreading, blow around the outer edges of the debris
piles. Never blow directly into the center of a pile. In dusty conditions,
lightly dampen surfaces. Watch out for children, pets, open windows or cars.
Use only original RURIS spare parts. Avoid using solvents when cleaning plastic parts, they can damage, weaken or destroy the plastic. Use clean cloths to remove dirt, dust, oil, etc.
Never leave brake fluids, gasoline, petroleum products, penetrating oils, etc. come into contact with the plastic parts. They contain chemicals that can damage, weaken or destroy plastic.
Do not attempt to modify this tool or create accessories that are not recommended for use. Any such modification constitutes misuse and may result in possible serious personal injury.
To avoid injury, always remove the battery from the blower when cleaning or performing any maintenance.
BLOWER STORAGE
Clean the blower thoroughly before storage. Store the blower in a dry, well- ventilated place out of the reach of children.
- Store and charge batteries in a cool area. Temperatures above or below normal room temperature will shorten battery life.
- Never store discharged batteries. Wait for the battery to cool down and fully charge.
DECLARATIONS OF CONFORMITY
DECLARATION OF CONFORMITY CE
Manufacturer: SC RURIS IMPEX SRL
Blvd. Decebal, no. 111, Administrative Building, Craiova, Dolj, Romania
Goal. 0351 464 632, www.ruris.ro,
info@ruris.ro
Authorized representative: Eng. Stroe Marius Catalin – General Manager
Authorized person for the technical file: Eng.Alexandru Radoi – Production
Design Director.
Description of the machine: Blower with battery is intended for surface
cleaning jobs such as driveways and driveways removing leaves, pine needles
and other small debris. Serial number: from xx SF1345e 0001 to xx SF1345e 9999
(Where xx represents the last two digits of the year of manufacture)
Product: Blower with battery
Model: RURIS
Type: SF1345e
Motor: Electric, with brushes
Power: Pw= 200 Wh
Maximum air speed: 41m/s
Number of speeds : 2
We, SC RURIS IMPEX SRL Craiova, producer, in compliance with HG 1029/2008 – regarding the conditions for the introduction of cars on the market, Directive 2006/42/EC – safety and security requirements, Standard EN ISO 12100:2010 – Cars. Security, Directive 2000/14/EC amended by Directive 2005/88/EC , HG 1756/2006 – on limiting the level of noise emissions in the environment, Directive 2014/30/EU on electromagnetic compatibility (HG 487/2016 on electromagnetic compatibility, updated 2019), Directive 2011/65/EU of June 8, 2011 regarding restrictions on the use of certain hazardous substances in electrical and electronic equipment amended by Directive 2011/65/EU Annex 2, we have certified the conformity of the product with the specified standards and declare that it complies with the main safety and security requirements, does not endanger life, health, work safety and does not have a negative impact on the environment.
The undersigned Stroe Catalin, the manufacturer’s representative, declares on his own responsibility that the product is in accordance with the following European standards and directives.
– SR EN ISO 12100:2011/ EN ISO 12100:2011 – Machine safety. Basic
concepts, general design principles. Basic terminology, methodology. Technical
principles
– SR EN 50636-2-100:2014 / EN 50636-2-100:2014 – Electrical appliances
for household and similar purposes. Security. Part 2-100: Particular
requirements for mains-operated garden blowers, vacuum cleaners and portable
suction blowers
– SR EN 62233:2008/ EN 62233:2008- Methods for measuring the
electromagnetic fields of household electrical appliances and similar purposes
regarding human exposure
– SR EN 60335-1:2012/A14:2020/ EN 60335-1:2012/A11:2014+A14:2019-
Electrical appliances for household use and similar purposes. Security. Part
1: General prescriptions
– SR EN 62133-1:2017/ IEC 62133-1:2017- Alkaline accumulators and other
accumulators with non-acidic electrolyte – Safety requirements for sealed
portable accumulators and for batteries made of them, intended for use in
portable applications.
Part 1: Nickel systems.
– SR EN 60335-1:2012/A2:2019/ EN 60335-1:2012/ A2:2019 – Electrical
appliances for household use and similar purposes. Security. Part 2-1: General
requirements
– SR EN 60384-14:2014/ EN 60384-14:2014- Fixed capacitors for use in
electronic equipment – Part 14: Sectional specifications – Fixed capacitors
for suppression of electromagnetic interference and connection to the supply
network
– SR EN 60664-1:2008/ IEC 60664-1:2007 – Coordinating the isolation of
equipment from low voltage networks. Part 1: Principles, prescriptions and
tests
– SR EN 61058-1-1:2017/ IEC 61058-1:2016- Switches for appliances – Part
1: General requirements
– EN IEC 55014-1:2021/ EN 55014-1:2021- Electromagnetic compatibility.
Requirements for household appliances, power tools and similar appliances.
Part 1: Issue
– SR EN IEC 55014-2:2021/ EN 55014-2:2021- Electromagnetic compatibility.
Requirements for household appliances, power tools and similar appliances.
Part 2: Immunity. Product family standard
– SR EN ISO 3744:2011 – Acoustics. Determination of sound power levels
emitted by noise sources using sound pressure
Directive 2000/14/EC (amended by Directive 2005/88/EC) – Noise emissions
in the outdoor environment
Directive 2006/42/EC – regarding machines – placing machines on the
market
Direction 2014/30/EU – on electromagnetic compatibility (HG 487/2016 on
electromagnetic compatibility, updated 2019);
DIRECTIVE 2011/65/EU of June 8, 2011 on restrictions on the use of
certain hazardous substances in electrical and electronic equipment amended by
Directive 2011/65/EU Annex 2.
Manufacturer’s brand and name: ZSI Co. Ltd
Other Standards or specifications used:
- SR EN ISO 9001 – Quality Management System
- SR EN ISO 14001 – Environmental Management System
- ISO 45001:2018 – Occupational Health and Safety Management System.
Note: the technical documentation is owned by the manufacturer.
Clarification: This declaration is in accordance with the original. Validity
period: 10 years from the date of approval.
Place and date of issue: Craiova, 19.12.2022
Year of application of the CE marking: 2022
No. reg: 1448/19.12.2022
Authorized person and signature:
Ing. Stroe Marius Catalin
Director General of
SC RURIS IMPEX SRL
DECLARATION OF CONFORMITY
Manufacturer: SC RURIS IMPEX SRL
Blvd. Decebal, no. 111, Administrative Building, Craiova, Dolj, Romania
Goal. 0351 464 632, www.ruris.ro,
info@ruris.ro
Authorized representative: Eng. Stroe Marius Catalin – General Manager
Authorized person for the technical file: Eng.Alexandru Radoi – Production
Design Director.
Description of the machine: Blower with battery is intended for surface
cleaning jobs such as driveways and driveways removing leaves, pine needles
and other small debris. Serial number: from xx SF1345e 0001 to xx SF1345e 9999
(Where xx represents the last two digits of the year of manufacture)
Product: Blower with battery
Model: RURIS
Type: SF1345e
Motor: Electric, with brushes
Power: Pw= 200 Wh
Maximum air speed : 41m/s
Number of speeds : 2
Measured sound power level: 98.6dB(A) Guaranteed sound power level: 100dB(A) The acoustic power level is certified by Intertek Testing Services through Report no. 190101195SHA-001 dated 29.10.2019 in accordance with the provisions of Directive 2000/14/CE and SR EN ISO 3744:2011.
We, SC RURIS IMPEX SRL Craiova, producer, in compliance with HG 1029/2008 –
regarding the conditions for the introduction of cars on the market,
Directive 2006/42/EC – safety and security requirements, Standard EN ISO
12100:2010 – Cars. Security, Directive 2000/14/EC amended by Directive
2005/88/EC , HG 1756/2006 – on limiting the level of noise emissions in the
environment, Directive 2014/35/EU , HG 409/2016 – on low voltage
equipment, Directive 2014/30/EU on electromagnetic compatibility (HG
487/2016 on electromagnetic compatibility, updated 2019), DIRECTIVE
2011/65/EU of June 8, 2011 on restrictions on the use of certain hazardous
substances in electrical and electronic equipment amended by Directive 2011/65
/EU Anxa 2, we certified the conformity of the product with the specified
standards and declare that it complies with the main safety and security
requirements, does not endanger life, health, work safety and has no negative
impact on the environment.
The undersigned Stroe Catalin, the manufacturer’s representative,
declares on his own responsibility that the product is in accordance with the
following European standards and directives:
- SR EN ISO 3744:2011 – Acoustics. Determination of sound power levels emitted by noise sources using sound pressure
- SR EN ISO 9001 – Quality Management System
- SR EN ISO 14001 – Environmental Management System
- ISO 45001:2018 – Occupational Health and Safety Management System.
Note: the technical documentation is owned by the manufacturer.
Clarification: This declaration complies with the original. Validity period:
10 years from the date of approval.
Place and date of issue: Craiova, 19.12.2022
Year of application of the CE marking: 2022
No. reg: 1449/19.12.2022
Authorized person and signature:
Ing. Stroe Marius Catalin
Director General of
SC RURIS IMPEX SRL
Customer Support
Telephone: 0351.820.105
e-mail: info@ruris.ro
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>