solis S6 50K Hybrid Inverter User Guide
- July 21, 2024
- solis
Table of Contents
solis S6 50K Hybrid Inverter
Product Information
Specifications:
- Product: S6 50K Hybrid Inverter
- Version: 1.1
- Deployment: Standard 3Phase
Frequently Asked Questions
Q: How do I know if my settings are saved correctly?
A: After completing each step, ensure to click on the corresponding Save or Next Step button to confirm the settings are saved correctly.
Q: Can I change the settings later after the initial setup?
A: Yes, you can access the inverter settings through the Solis Cloud App or local operation menu to make any necessary changes post-initial setup.
Q: What should I do if I encounter difficulties during the setup process?
A: If you face any challenges during the setup, refer to the Troubleshooting section in the user manual or contact customer support for assistance.
Overview
The Quick Setup Guide is a step-by-step guide on setting up and commissioning a standard 3Phase inverter deployment for the S6 50K Hybrid inverter range.
Step 1 – Bluetooth Inverter Connection
Logging into the inverter locally with Bluetooth for Quick Setup
Step 2 – Quick Setup of the Inverter
- a. Set Inverter Time
- b. Select the Battery Model
- c. Set the Meter
- d. Set the correct Grid Code
- e. Setup the Self Use Work Mode
Method Bluetooth Inverter Connection
-
Step 1.1: Log into the Solis Cloud App then select the “Service “icon
-
Step 1.2: Select the “Local Operation” menu item
-
Step 1.3: Select the “Connect with Bluetooth” option
-
Step1.4: Select the inverter by serial number.
-
Step 1.6: log into the inverter
(First time user must create a password) -
Step 1.7: Select the Settings icon to start the inverter Quick Setup
Quick Setup the Inverter
- Step 2.1: Select Quick setting in the inverter menu
- Step 2.2: Set the time by simply selecting “Follow Phone Time”.
- Step 2.3: Battery model selection, Select the required battery model-BMS 1
- Battery model selection, Select the required battery model-BMS 2 (if applicable)
- Step 2.4: Select the Meter option as seen in image 2.4.1
- Step 2.5: Grid Code Selection for NRS097
Step 2.6: Work Mode
-
2.6.1a: Select Self use Mode and enable Self use Mode switch
-
2.6.1b: To add a Discharge or Charge time, you can click on Add time, then select the action required.
Set the times required and then you can enter the SOC level required and the amp. (Refer to our “Time of Use” SOP for more information)
-
THE END
Made by Ginlong Technologies
Stock Code: 300763.SZ
w: solisinverters.com
e: saservice@solisinverters.com