ellu 2BH4GV2 SOS Alert User Guide
- August 29, 2024
- ellu
Table of Contents
First steps
Pairing your band
- Activate your smartphone bluetaoth.
- Hold one button on the band to switch into pairing mode. You will feel a vibration and will see a blue light
- Open ellu app.
- Choose and pair your band. The band will vibrate softly and the light will turn white.
- Voila! You can start using your band.
Charge your ellu
The magnetic charger is really intuitive and easy to use! How to place the band?
- Just align the 2 pins. on the same side
50S. Sending an alert
If you are in danger or any situation that requires it:
- Press & hold both buttons.
- Hold both buttons until you feel a vibration and a red blinking LED. This is the confirmation the sos has been sent.
SOS. Receiving an alert
- You will el astrong vibration and the red LED will remain blinking.
- Enter the app.
How to send?
Hold 2 sec
Leash
If you get too far from your phone you may lose the connection with your
band.
When Leash is enabled in the app, the band will notify you that it has ‘ lost
connectoin by vibrating and flashing a blinking blue light.
How to re-connect?
- Get closer to your phone
The band will try to re-connect for the next 8h
Pairing the band manually
When the band is lost the connection with the app, you can pair it manually.
Hold one button on the band until you feel a vibration and the light in your
band turns blue. When the pairing is done you willfeel another vibratoin and
the light in your band will turn white
How to re-connect?
- Hold one button
Checking battery life
You can check the battery life of your band by pressing on either button.
How to check?
- Press once
Calls and Pager
Calls. Whenever you receive a call, you will feel a series of long
vibrations and will see a green blinking light.
Pager. Whenever you are paged, you will feel three short vibrations and
will see a double green blink.
Alarm and Timer
You can set alarms and timers from the – ellu app.
In both cases, at the set time, you wil see a white blinking light in the band
and will feel a vibration.
How to stop it?
- Press once.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>