VOVO TCB-8100W Bidet Toilet With Remote Installation Guide

VOVO TCB-8100W Bidet Toilet With Remote Installation Guide

Cautions before Installation

(This may differ from the product specification.)

Installation

• Secure enough installation space in the bathroom and check whether it Space disturbs the bathroom door. .

  • Secure water outlet at least 100mm away from the floor.
  • It can cause the discoloration of wall.
    

•  Check whether the water supply pipe the and drain pipe are in the required position before installation.

• Water Pressure

  1. Minimum 1.5 kgf/cm2 (0.15 MPa) water pressure is required. If the pressure is not secured, please be aware that the flushing may not work properly to discharge the dirt.
  2. Even if other modifiers are used at the same time, it still requires more than the minimum required water pressure. The maximum water pressure is 7.5 kgf/cm2 (0.75 MPa).

Drawing For Installation (unit:mm:in)

Remote Control types

• PB-707S
  PB-101S
  

• TCB 090SA
  TCB 090S
  RTB 090WA
  RTB 090W
  TC-090
  TC-090W
  

• TCB 9100WA
  TCB 9100GA
  TCB 9100W
  TCB 9100G
  

• TCB 8100
  TCB 8200
  

Accessories

Accessories (parts) are divided into type A and type B according to product specifications.

A type Installation Accessories

• Remote control Each product may use a different remote controller.
  

• Wax Ring

• Wall Mount
  

• Conversion Nut

• AA Batteries (x3)

• Screws (x2)

• Anchors (x2)

• Water Hose (Thin)

B type Installation Accessories

• Remote control Each product may use a different remote controller.
  

• Wax Ring

• Wall Mount
  

• AA Batteries (x3)

• Screws (x2)

• Anchors (x2)

• Water Hose (Thick)

• Ring Plate

• Water Pipe

• Water Shutoff Valve

• Strainer Filter

Installation

( This may differ from the product specification.)

A type Installation Accessories

• Attach the provided water hose to your water shutoff valve.
  

You may need to use the included conversion nut to fit your water shutoff valve. Simply screw the conversion nut into the 1/2″ side of the hose before connecting it to your water shutoff valve.

B type Installation Accessories

1. Close the water gauge.
2. Remove dust and sand in the water inlet when installing the shutoff valve.
3. Wind Teflon tape around the water pipe.
4. Connect the pipe with the shutoff valve.
5. Connect the Strainer Filter.
   

Connect Hose

How to install the Ceramic

Connect Bidet to Toilet

1. Assemble the toilet with bidet, jet spray outlet and bowl washing outlet.
2. Insert the hose into the filter.
3. Insert bidet’ s fixing hook onto the toilet’ s fixing hook until it “clicks”
   

Connect Power

1. Insert the power plug into the outlet.
2. Press the  flush button.
   • Water will fill the ceramic blow.

The water may overflow out of the rim when cleaning the bowl in the region with high water pressure.

Using a screwdriver, turn the shutoff valve clockwise to reduce the water pressure.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>