MEAN WELL PWM-200-12 200W Wireless Lighting Constant Voltage LED Driver Solution Owner’s Manual

: July 20, 2024
: MEAN WELL

MEAN WELL PWM-200-12 200W Wireless Lighting Constant Voltage LED Driver

Solution

MEAN-WELL-PWM-200-12-200W-Wireless-Lighting-Constant-Voltage-LED-Driver-
Solution-product

Product Specifications

Model: PWM-200-12, PWM-200-24, PWM-200-48
DC Voltage: 12V, 24V, 48V
Rated Current: 15A, 8.3A, 4.17A
Rated Power: 180W, 199.2W, 200.2W
Dimming Range: 0 – 100%
Output: PWM
PWM Frequency: 4kHz for BLE, 2.5kHz for TY1, 1kHz for SVA, 200Hz for WZ1
Setup, Rise Time: 1000ms, 80ms/115VAC or 230VAC for BLE, WZ1 and TY1; 2000ms, 80ms/115VAC or 230VAC for SVA
Hold Up Time: 10ms/230VAC or 115VAC
Voltage Range: 100 – 305VAC, 142 – 431VDC
Frequency Range: 47 – 63Hz
Power Factor: PF>0.97/115VAC, PF>0.96/230VAC, PF>0.94/277VAC @ full load

Product Usage Instructions

Installation:

Follow the manufacturer’s guidelines for installing the LED driver in your lighting system.

Connection:

Ensure proper connections are made according to the input and output specifications provided in the manual.

Dimming:

Use the dimming range of 0 – 100% to adjust the brightness of the connected LEDs as needed.

Powering On:

Apply power to the LED driver within the specified voltage range for optimal performance.

Troubleshooting:

If you encounter any issues, refer to the troubleshooting section of the user manual or contact customer support.

Frequently Asked Questions (FAQ)

Q: What is the typical lifetime of the PWM-200 IoT Series LED driver?

A: The typical lifetime is greater than 50,000 hours with a 5-year warranty.

Q: Is the LED driver compliant with IP67 standards?

A: Yes, the LED driver is IP67 compliant.

Features

Bluetooth wireless LED driver
Constant voltage PWM style output with frequency up to 4kHz compliant IEEE 1789-2015
Plastic housing with class Il design
Built-in active PFC function
Fully encapsulated with IP67 level (except SVA and BLE type)
Typical lifetime >50000 hrs and 5 years warranty

• Applications

LED strip lighting
Indoor LED lighting
LED decorative lighting
LED architecture lighting
Cove lighting
Type “HL” for use in class I, division 2 hazardous (classified) location.
GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx

Description

PWM-200 loT series is a 200W AC/DC LED driver featuring the constant voltage mode with PWM style output, which is able to maintain the color temperature and the brightness homogeneity when driving all kinds of LED strips. PWM- 200loT operates from 100~305VAC and offers models with different rated voltage ranging between 12V and 48V. Thanks to the high efficiency up to 94%, with the fanless design, the entire series is able to operate for -20°C~+85C case temperature under free air convection. The entire series is rated with IP67 ingress protection level and suitable to work for dry, damp or wet locations. PWM-200 loT can provide dimming level low to 0.4% suitable for low light level applications e.g. cinema. The output frequency is up to 4kHz which compliant to IEEE1789-2015 requirement for no risk providing a great solution for health concern due to light flickering.

Model Encodina

MEAN-WELL-PWM-200-12-200W-Wireless-Lighting-Constant-Voltage-LED-Driver-
Solution-fig-2 wireless lighting brand and solution

MODEL	PWM-200-12	PWM-200-24	PWM-200-48

OUTPUT

| DC VOLTAGE| 12V| 24V| 48V
RATED CURRENT| 15A| 8.3A| 4.17A
RATED POWER| 180W| 199.2W| 200.2W
DIMMING RANGE| 0 ~ 100%
PWM FREQUENCY (Typ.)| 4kHz for BLE, 2.5kHz for TY1, 1kHz for SVA, 200Hz for WZ1
SETUP, RISE TIME Note.2| 1000ms, 80ms/115VAC or 230VAC for BLE, WZ1 and TY1; 2000ms, 80ms/115VAC or 230VAC for SVA
HOLD UP TIME (Typ.)| 10ms/230VAC or 115VAC

INPUT

| VOLTAGE RANGE Note. 3| 100 ~ 305VAC 142 ~ 431VDC

(Please refer to “STATIC CHARACTERISTIC” section)

FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR (Typ.)| PF>0.97/115VAC, PF>0.96/230VAC, PF>0.94/277VAC @ full load

(Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)

TOTAL HARMONIC DISTORTION| THD<20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC)

(Please refer to “TOTAL HARMONIC DISTORTION” section)

EFFICIENCY

(Typ.)

POWER CONSUMPTION

| Standby power consumption<2.5W when dimming off

PROTECTION

| OVERLOAD| 108 ~ 135% rated output power
Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT| Shut down o/p voltage, re-power on to recover

OVER VOLTAGE

| 13 ~ 18V| 27 ~ 34V| 53 ~ 65V
Shut down o/p voltage, re-power on to recover after fault condition is removed
OVER TEMPERATURE| Shut down o/p voltage, re-power on to recover after fault condition is removed

ENVIRONMENT

| WORKING TEMP.| Tcase=-20 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.| Tcase=+85℃
WORKING HUMIDITY| 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY| -20 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 50℃)
VIBRATION| 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

FUNCTION

SAFETY & EMC

| ****

SAFETY STANDARDS Note.5

| Ul8750( type ”HL” ), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13,

BS EN/EN62384 independent, IP67(except SVA and BLE type), EAC TP TC 004, GB19510.1,GB19510.14 approved; Design refer to BS EN/EN60335-1, BIS

WITHSTAND VOLTAGE| I/P-O/P: 3.75KVAC
ISOLATION RESISTANCE| I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION Note.6| Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load≧60%) ; BS EN/EN61000-3-3, GB/T 17743, GB17625.1,,EAC TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity, Line-Line 2KV),EAC TP TC 020

OTHERS

| MTBF| 2413.4 K hrs min. Telcordia SR-332 (Bellcore) ; 211.1 K hrs min. MIL-HDBK-217F (25℃)
DIMENSION| 1956839.5mm (LWH)
PACKING| 1.03Kg; 12pcs/13.4Kg/0.71CUFT
NOTE| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.

2. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.

3. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.

4. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf))

5. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃or less.

6. Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com

7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

8. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf

9. It is not recommended to connect to capacitive loads.

10. The dimming memory function of TY1 type needs at least 5 seconds to complete.

11. The matching mode of TY1 type is on-off-on-off-on by AC or DC power.

12 To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.

※ Product Liability Disclaimer：For detailed information, please refer to https://[www.meanwell.com/serviceDisclaimer.aspx](http://www.meanwell.com/serviceDisclaimer.aspx) File Name:PWM-200IoT-SPEC 2024-03-01

DIMMING OPERATION

MEAN-WELL-PWM-200-12-200W-Wireless-Lighting-Constant-Voltage-LED-Driver-
Solution-fig-3

Bluetooth control
‧To be used through APP available on Apple Store and Google Play Store for iOS and Android. Search: BLE with Casambi/TY1 with Smart Life/SVA with Silvair/WZ1 with WiZ

Example:

The APP for BLE type is “Casambi” The APP for TY1 type is “Smart Life” The APP for SVA type is “Silvair” The APP for WZ1 type is “WiZ CN”

MEAN-WELL-PWM-200-12-200W-Wireless-Lighting-Constant-Voltage-LED-Driver-
Solution-fig-5

OFFICIAL WEBSITE AND ECOSYSTEM INFORMATION

The real time Bluetooth IC temperature is shown in the APP. In case it reaches above 65 ºC (equivalent to Tc 80ºC), the driver will be turn off to provide a protection. In case the units is cooled down, it can be manually turn ON and back to normal operation again.

NOTE:

This software temperature protection is an extra independent function from driver its own hardware over temperature protection(when it is enabled, it needs re-AC power on to recover).
In general the software temperature protection is triggered before the hardware one when in over temperature.
Website: https://www.casambi.com

Adding new device:

Install the app on the mobile device.Please go to the App Store for iOS or Google Play for Android, and search for “Smart Life” to download.
Turn on the phone’s Bluetooth and open the “Smart Life” app.
Register an account. Register an account to be able to use the dedicated application.
If you have already registered an account, please enter your country/region, account and password to login.
Click “Add Device” and select “Light Source(BLE)” from the lighting type.
Reset the device. Please follow the 3 steps in the diagram to complete the setup.
Wait for the system to search for the device and connect it. When the steps are finished, click “Done” to connect successfully.
NOTE: 1.Website: https://www.tuya.com

NOTE: 1.Website: https://www.silvair.com

NOTE: 1.Website:https://www.wizconnected.com

OUTPUT LOAD vs TEMPERATURE

MEAN-WELL-PWM-200-12-200W-Wireless-Lighting-Constant-Voltage-LED-Driver-
Solution-fig-15

STATIC CHARACTERISTIC

MEAN-WELL-PWM-200-12-200W-Wireless-Lighting-Constant-Voltage-LED-Driver-
Solution-fig-16

POWER FACTOR (PF) CHARACTERISTIC

MEAN-WELL-PWM-200-12-200W-Wireless-Lighting-Constant-Voltage-LED-Driver-
Solution-fig-17

TOTAL HARMONIC DISTORTION (THD)

48V Model, Tcase at 75℃

MEAN-WELL-PWM-200-12-200W-Wireless-Lighting-Constant-Voltage-LED-Driver-
Solution-fig-18

EFFICIENCY vs LOAD

PWM-200 series possess superior working efficiency that up to 94% can be reached in field applications.

48V Model, Tcase at 75℃

MEAN-WELL-PWM-200-12-200W-Wireless-Lighting-Constant-Voltage-LED-Driver-
Solution-fig-19

LIFETIME

MEAN-WELL-PWM-200-12-200W-Wireless-Lighting-Constant-Voltage-LED-Driver-
Solution-fig-21

Block Diagram

MEAN-WELL-PWM-200-12-200W-Wireless-Lighting-Constant-Voltage-LED-Driver-
Solution-fig-22

Mechanical Specification

MEAN-WELL-PWM-200-12-200W-Wireless-Lighting-Constant-Voltage-LED-Driver-
Solution-fig-23

MEAN-WELL-PWM-200-12-200W-Wireless-Lighting-Constant-Voltage-LED-Driver-
Solution-fig-24

Installation Manual

MEAN-WELL-PWM-200-12-200W-Wireless-Lighting-Constant-Voltage-LED-Driver-
Solution-fig-25

Cautions

Before commencing any installation or maintenance work, please disconnect the power supply f that it cannot be re-connected inadvertently!
Keep proper ventilation around the unit and do not stack any object on it. Also a 10-15 cm clearance must be kept when the adjacent device is a heat source.
Mounting orientations other than standard orientation or operate under high ambient temperature may increase the internal component temperature and will require a de-rating in output current.
Current rating of an approved primary /secondary cable should be greater than or equal to that of the unit. Please refer to its specification.
For LED drivers with waterproof connectors, verify that the linkage between the unit and the lighting fixture is tight so that water cannot intrude into the system.
Tc max. is identified on the product label. Please make sure that temperature of Tc point will not exceed limit.
Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minutes.
The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.