PYLE PBKSR40WT Desktop Wireless BT Bookshelf Speakers User Guide
- June 3, 2024
- Pyle
Table of Contents
PYLE PBKSR40WT Desktop Wireless BT Bookshelf Speakers
Please read all instructions before using this for the best performance of this product. Save these instructions for future reference.
Box Contents
LED Indicators and Button Introduction
-
Power switch
-
Input selection
-
Press in to navigate between audio sources: BT -> Optical -> Coaxial -> LINE IN
03. Sound effects -
Press in to navigate between audio sources: Music -> Dialogue -> Movie
-
Volume control
-
Treble control
-
Coaxial input port
-
Bass control
-
Power port
-
Line in the input port
-
Optical input port
-
Left speaker audio output
-
Left speaker audio in
Know Your Remote
| __ | Power button | __ | Mute/Unmute |
|---|---|---|---|
| __ | Volume up | Volume down | |
| __ | Previous track | __ | Next track |
| __ | Play/pause | __ | Bluetooth mode |
| __ | Optical mode | __ | Input mode |
| __ | Line mode | Coaxial mode | |
| Movie mode | Music mode | ||
| Dialogue mode |
Connection Diagram
- a Digital Optical cable (supplied)
- b Coaxial cable (not supplied)
- c BT
- d Stereo RCA to 3.5mm audio cable (supplied)
- e RCA to RCA audio cable (supplied)
- f Power Adapter (supplied)
Connecting with a TV
Active Speaker
-
A Method 1. Connecting using an Optical cable.
Select Optical mode and set the TV’s audio output to “PCM”.(More information on PCM page) -
B Method 2. Connecting using a RCA to 3.5mm cable. Select RCA mode.
-
C Method 3. Connecting using a Coaxial cable.
Select Coaxial mode and set the TV’s audio output to “PCM”. (More information on PCM page).
Setting “PCM” on your TV
When all cables are connected properly, and LED indicator lights are properly
if there is no sound from the tv or Soundbar, please set your tv as below:
- Press “Menu” on the TV’s remote control.
- Press the arrow keys on the remote to scroll to “Audio Settings.”
- Press “OK” on the remote control.
- Scroll to “Advanced Audio” and press “OK”. Some televisions may not have an”Advanced Audio” menu and may list various audio settings instead.
- Scroll to “Audio Output Mode” or “Digital Audio Output Mode” and press “OK”.
- Scroll until “PCM” is displayed as the current audio output.
- Press “OK” to save the settings.
Connecting a Wireless BT Device
- Press the “BT” button on the remote or press the “ ” button on the back panel of the active speaker, and the LED indicator blinks blue.
- Turn on Wireless BT on the BT device.
- Select “PyleUSA” and connect it. When your BT device is connected, the LED indicator blinks blue slowly.
- Play music files from the device, connected via BT, through the bookshelf speaker.
Troubleshooting
No sound
- Check if the power indicator light is ON.
- Try to turn up the volume using either the master volume control or the remote control.
- Ensure the audio cables are firmly connected and the input is set correctly on the speakers.
- Check if there is a signal output from the audio source.
Cannot connect via Wireless BT
- Make sure the speaker is switched to BT input, in another audio input mode BT can not be paired or connected. Disconnect from any BT device by pressing and holding the volume dial in BT mode, then try again.
- Effective BT transmission range is 10 meters, make sure the operation is within the range.
- Try another BT device for connection.
The PBKSR40WT Bookshelf Speaker does not turn on
Check if the mains power is connected or if the wall outlet is switched on.
Specifications
| Power output: | L/R: 40W + 40W |
|---|---|
| Signal to noise ratio dB(A): | L/R: ≥80dB (A) |
| Input sensitivity: | LINE IN: R/L: 600±50mV |
OPT: R/L: 500±50mFFS
Frequency response:| 40HZ-20KHZ
Bass unit:| 4 inch (102mm)
Tweeter unit:| 1 inch (25.4mm)
Questions? Comments?
We are here to help!
Phone: (1) 718-535-1800 Email:
support@pyleusa.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>