PEDROLLO PQ60 Peripheral Impeller Pump Owner’s Manual
- July 18, 2024
- pedrollo
Table of Contents
PEDROLLO PQ60 Peripheral Impeller Pump
Product Information
Specifications
- Type: PQ Peripheral Impeller Pump
- Performance Range: Clean water domestic use
- Features: 20% reduction in noise levels
- Application Limits: Designed for transferring clean water free from abrasive particles
Product Usage Instructions
Installation
- Ensure the pump is placed on a stable, level surface.
- Connect the appropriate voltage supply based on the pump model.
- Check the ports and make sure they are securely connected.
Operation
- Prime the pump by filling it with water before starting.
- Turn on the power and monitor the pump for proper operation.
- Adjust the flow rate as needed using the controls.
Maintenance
- Regularly check for any leaks or unusual noises during operation.
- Clean the pump and impeller periodically to prevent clogs.
- Follow the recommended maintenance schedule provided in the manual.
FAQ
- Q: What is the voltage requirement for the different models?
- A: The voltage requirements vary per model, ranging from 230V to 400V depending on the specific pump.
- Q: What are the construction features of the pump?
- A: The pump body is made of cast iron, the impeller is brass, and it features a mechanical seal with specific materials for different models.
PERFORMANCE RANGE
- Flow rate up to 90 l/min (5.4 m3/h)
- Head up to 100 m
INSTALLATION AND USE
Peripheral pump with radial suction
- Designed to transfer clean water free from abrasive particles and liquids that will not damage the pump’s components.
- Its compact design and efficient hydraulic performance make it ideal for domestic applications.
APPLICATION LIMITS
- Manometric suction head up to 8 m
- Liquid temperature between -10 °C and +60 °C
- Ambient temperature up to +40 °C (+50 °C for PQ 60 and PQ61)
- Maximum working pressure:
- 6 bar for PQ 60, PQ 61, PQ 65
- 7 bar for PQ 80
- 10 bar for PQ 90, PQ 100, PQ 200, PQ 300
AVAILABLE UPON REQUEST
- Pumps for industrial use
- Mechanical seal options available
- Protection rating IP X5 for PQ 80-90-100-200-300
- Different voltage requirements 60 Hz frequency
PATENTS – TRADE MARKS – MODELS
- Motor bracket: Patent No. IT1243605
- Registered community model No. 002146548
- PQm 60® Registered trademark No. 0001520591
CURVES AND PERFORMANCE DATA – HS=0 m
TYPE| POWER ( P2 )|
1~
|
3~
| Q| m³/h| 0| 0.3| 0.6| 0.9| 1.2| 1.5| 1.8| 2.1| 2.4| 3.0| 3.6| 4.2|
4.8| 5.4
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
Single- ph.| Three- ph.| kW| HP| l/min| 0|
5| 10| 15| 20| 25| 30| 35| 40| 50|
60| 70| 80| 90
PQm 60| PQ 60| 0.30| 0.40|
IE2
|
IE3
|
H metres
| 40| 38| 33.5| 29| 24| 19.5| 15| 10| 5| | | | |
PQm 61| PQ 61| 0.30| 0.40| 40| 38| 33.5| 29| 24| 19.5| 15|
10| 5| | | | |
PQm 65| PQ 65| 0.55| 0.75| 55| 50| 45.5| 40.5| 36| 31| 27|
22| 17| 8| | | |
PQm 80| PQ 80| 0.75| 1| 70| 66| 61| 56| 51| 46| 41| 36.5|
31| 22| | | |
PQm 90| PQ 90| 0.75| 1| 90| 82| 71| 60| 49| 38| 27| 17| 5|
| | | |
PQm 100| PQ 100| 1.1| 1.5| 85| 80| 75| 70| 65| 60| 55| 50|
45| 35| 25| 15| |
PQm 200| PQ 200| 1.5| 2| 90| 86| 81| 76| 71| 65.5| 60| 55|
50| 40| 30| 20| 10|
PQm 300| PQ 300| 2.2| 3| 100| 95| 90| 85| 80| 75| 70| 65|
60| 50| 40| 30| 20| 10
- Q = Flow rate
- H = Total manometric head
- HS = Suction height
Performance curves comply with EN ISO 9906 Grade 3B tolerance limits.
Technical data
ABSORPTION
TYPE
Single- phase
| VOLTAGE
230 V
---|---
PQm 60| 2.3 A
PQm 61| 2.3 A
PQm 65| 3.7 A
PQm 80| 5.2 A
PQm 90| 5.6 A
PQm 100| 9.0 A
PQm 200| 12.0 A
PQm 300| 13.0 A
TYPE
Three- phase
| VOLTAGE
---|---
230 V –| 400 V –
PQ 60| 2.0 A| 1.15 A
PQ 61| 2.0 A| 1.15 A
PQ 65| 2.9 A| 1.7 A
PQ 80| 3.8 A| 2.2 A
PQ 90| 4.2 A| 2.4 A
PQ 100| 6.2 A| 3.6 A
PQ 200| 8.3 A| 4.8 A
PQ 300| 9.0 A| 5.2 A
DIMENSIONS AND WEIGHT
| TYPE | PORTS | DIMENSIONS mm | kg |
|---|---|---|---|
| Single- ph. | Three- ph. | DN1 | DN2 |
| h2 | h3 | i | m |
| PQm 60 | PQ 60 | 1″ | 1″ |
| 131 | 76 | 55 | 118 |
53
| ****
7
| 4.9| 4.9
PQm 61| PQ 61| ½”| ½”| 32.5| 133.5| 4.9| 4.9
PQm 65| PQ 65| 1″| 1″| ****
22
| 220| 152| 113| 30| 143| 78| 80| 120| 100| 6.8| 6.2
PQm 80| PQ 80| 256| 152(*)| 121| 151| 83| 90| 142| 112|
62.5| 9.9| 9.9
PQm 90| PQ 90| ¾”| ¾”| 126| 27| 153| 84| 10.1|
10.1
PQm 100| PQ 100| ****
1″
| ****
1″
| ****
29
| 322.5| ****
211
| ****
140
| ****
28
| ****
168
| ****
88
| ****
100
| ****
164
| ****
125
| ****
95
| ****
9
| 14.3| 14.3
PQm 200| PQ 200| 15.4| 15.4
PQm 300| PQ 300| 342.5| 18.2| 18.2
(*) h=199 mm for single-phase 110 V versions
PALLET CAPACITY
| TYPE | NO. OF PUMPS |
|---|---|
| Single- ph. | Three- ph. |
| PQm 60 | PQ 60 |
| PQm 61 | PQ 61 |
| PQm 65 | PQ 65 |
| PQm 80 | PQ 80 |
| PQm 90 | PQ 90 |
| PQm 100 | PQ 100 |
| PQm 200 | PQ 200 |
| PQm 300 | PQ 300 |
CONSTRUCTION FEATURES
-
Pump body Cast iron with ISO 228/1 threaded ports
For PQ 61: cast iron with anti-locking treatment with ISO 228/1 threaded ports -
Motor bracket Aluminum with brass cover and front scraping anti-locking function (patented)
-
Impeller Brass, radial peripheral vane type
-
Mechanical seal Pump Seal Shaft Materials
PQ 60-61-65-80 AR-12 Ø 12 mm Ceramic / Graphite / NBR
PQ 90 ST1-12 Ø 12 mm Silicon carbide / Graphite / NBR
PQ 100-200-300 FN-14 Ø 14 mm Graphite / Ceramic / NBR -
Motor shaft Stainless steel AISI 431 (EN 10088-3 – 1.4104 for PQ 60, PQ 61, PQ 65)
-
Electric motor PQm: single-phase 230 V – 50 Hz with winding integrated thermal motor protection.
PQ: three-phase 230/400 V – 50 Hz- Pumps are equipped with high-efficiency motors (IEC 60034-30-1) class IE2 for single-phase models class IE3 for three-phase models
- Continuous running duty S1
- Insulation: class F
- Protection rating: IP X4