PEDROLLO VX-MF Microcast Stainless Steel Submersible Pumps Instructions
- June 7, 2024
- pedrollo
Table of Contents
PEDROLLO VX-MF Microcast Stainless Steel Submersible Pumps
Product Specifications
- Type: VX-MF Microcast stainless steel submersible pumps
- Recommended Use: Sewage, Domestic use, Civil use, Industrial use
- Material: Stainless steel for superior corrosion and abrasion resistance
- Impeller: VORTEX impeller design for handling solids up to 50 mm in diameter
- Power Cable Length: 10 meters
- Float Switch: Included (exclusive to single-phase models)
Product Usage Instructions
Performance Range
The VX-MF submersible pumps feature an impeller designed for superior performance and efficiency. It can handle solids up to 50 mm in diameter, ensuring safe operation against clogging.
Application Limits
Ensure the pump is used with an appropriately sized power cable to optimize performance. Different voltage requirements and 60 Hz frequency are available upon request.
Technical Data
| Type | Voltage | Absorption |
|---|---|---|
| Single-phase VX-MF | 230 V | 4.3 A – 9.6 A |
| Three-phase VX-MF | 400 V | 1.6 A – 3.7 A |
Installation Instructions
Follow the typical installation guidelines provided in the manual for your specific model to ensure proper setup and operation. Ensure minimum clearances and proper alignment as per the instructions.
FAQ
- Q: What is the maximum diameter of solids that the pump can handle?
- A : The VORTEX impeller design allows the pump to handle solids up to 50 mm in diameter.
- Q: Can I request different voltage requirements for the pump?
- A: Yes, different voltage requirements are available upon request for customization.
They are recommended when an pump of high efficiency, quality and durability is required
Constructed entirely from stainless steel, VX-MF submersible pumps offer superior corrosion and abrasion.
PERFORMANCE RANGE
- Flow rate up to 750 l/min (45 m³/h)
- Head up to 15.5 m
INSTALLATION AND USE
The VX-MF micro-cast stainless steel submersible pumps are designed for
demanding working conditions, ideal for sewage drainage in domestic, civil,
and industrial settings where suspended solids are present, such as water
mixed with sludge, groundwater, or surface water. such as sludge-mixed water,
groundwater, or surface water.
They are also perfect for pumping out flooded areas like basements,
underground parking garages, car wash stations, and emptying septic tanks and
sewage systems.
- The hydraulic configuration of the VORTEX volute and impeller results from advanced fluid dynamics calculations, delivering superior performance and efficiency for notable energy savings.
- The VORTEX impeller can handle solids up to 50 mm in diameter. Its unique design ensures safe operation against clogging.
INCLUDES
- Power cable length 10 m
- Float switch (exclusive to single-phase models)
APPLICATION LIMITS
- Depth below water level up to 5 m (with an appropriately sized power cable)
- Liquid temperature up to +40 °C
- Suspended solids transfer:
- up to Ø 40 mm for VX /35-MF
- up to Ø 50 mm for VX /50-MF
- Minimum immersion for continuous service:
- 290 mm for VX 8-MF and VX 10-MF
- 330 mm for VX 15-MF
- 360 mm for VX 20-MF
AVAILABLE UPON REQUEST
- Different voltage requirements 60 Hz frequency
PATENTS – TRADE MARKS – MODELS
- Patent No. EP2313658
- Patent No. IT0001428923
CURVES AND PERFORMANCE DATA / 50 Hz
ABSORPTION
DIMENSIONS AND WEIGHT
Typical installation
PALLET CAPACITY
MATERIALS AND COMPONENTS
- Pump body : Micro-cast AISI 316L stainless steel with ISO 228/1 threaded port
- Base: Stainless steel AISI 304
- Impeller : VORTEX type in AISI 304 stainless steel.
- Motor sleeve : Stainless steel AISI 304
- Motor cover :AISI 304 stainless steel for VX 8-10 MF Cast iron with cataphoresis treatment for VX 15-20 MF
- Motor shaft : Stainless steel AISI 316L
- Double mechanical seal in oil chamber
- Capacitor (exclusive to single-phase models)
- Electric motor
- VXm-MF : single-phase 230 V – 50 Hz with winding integrated thermal motor protection
- VX-MF: three-phase 400 V – 50 Hz
- Insulation: class F
- Protection rating : IP X8
- Power cord
- Power cable encapsulated with epoxy resin both in the grommet area and where the conductors exit the sheath, for absolute insulation against moisture and water.
- Type ‘H07 RN-F (Schuko plug exclusive to single-phase models)
- Standard length 10 metres
- Float switch (exclusive to single-phase models)
- Tilting device for the float cable (exclusive to single-phase models)
- Patent No. IT0001428923
- Power cable strain relief
- Patent No. EP2313658
SEWAGE LIFTING SYSTEM KIT VX-MF – BC-MF
VERSION WITH HORIZONTAL DELIVERY AND ¾” GUIDE PIPES
Kit consisting of
VERSION WITH VERTICAL DELIVERY AND ¾” GUIDE PIPES
Kit consisting of
ACCESSORIES AVAILABLE FOR ORDER
RUNNING GUIDE
- For VX /35-MF: CODE ASSFL005
- For VX /50-MF , BC /50-MF: CODE ASSFL006
Complete with ring nut and gasket
GUIDE TUBE SUPPORT
For Ø ¾ ” guide tubes: CODE 859SV340INTFA
To ensure stability, insert a support every 2 meters along the guide tube
GUIDE TUBE (AISI 304 stainless steel)
- 2 meters Ø ¾” guide tube : CODE 54SARTG0052F
- 3 meters Ø ¾” guide tube : CODE 54SARTG0053F
- 6 meters Ø ¾” guide tube: CODE 54SARTG0056F
DIMENSIONS (Version with horizontal outlet)
DIMENSIONS (Version with vertical delivery)
SEWAGE LIFTING SYSTEM KIT VX-MF – BC-MF | 50 Hz
- Sewage
- Domestic use
- Civil use
- Industrial use
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>