PEDROLLO BC 35 Double-Channel Submersible Pumps Instruction Manual

PEDROLLO BC 35 Double-Channel Submersible Pumps

DOUBLE-CHANNEL

• BC electric pumps are DOUBLE CHANNEL pumps, specially designed and made using the most advanced expertise of Pedrollo that can rely on 50 years of experience in pump construction.
• Made from stainless steel and exceptionally sturdy, abrasion-resistant, long-lasting, heavy-gauge cast iron, BC series pumps feature high-efficiency DOUBLE CHANNEL type impellers for high flow rates. They are therefore suitable for draining foul and waste water, sewage, water mixed with solids, activated and putrid sludge with solids in suspension up to 50 mm in diameter.
• Thanks to enhanced oversizing of the electric motor, shaft and bearings, these new BC electric pumps guarantee unprecedented service life, high hydraulic performance, low operating costs and easy maintenance. The sturdy electric motor construction allows continuous mode operation even if partially uncovered.

PERFORMANCE RANGE

• Flow rate up to 2300 l/min (138 m3/h) · Head up to 31 m

APPLICATION LIMITS

• 10 m maximum immersion depth below the water level (with a properly long power cable)
• Maximum liquid temperature +40 °C
• Passage of suspended solids: ­ up to Ø 35 mm for BC 35 ­ up to Ø 50 mm for BC 50 Minimum immersion depth for continuous service: 500 mm

CONSTRUCTION AND SAFETY STANDARDS

• 10 m power cable length

INSTALLATION AND USE

Made from stainless steel and exceptionally sturdy, abrasion-resistant, long- lasting, heavy-gauge cast iron, the BC pump series features a DOUBLE-CHANNEL impeller and is therefore suitable for draining dirty, sewage and waste water, and water mixed with putrid sludge. The pumps are suitable for installation in sewers, tunnels, excavations, canals, underground car parks, etc.

PATENTS – TRADE MARKS – MODELS

• Registered EU Design n. 003863158-0001

OPTIONS AVAILABLE ON REQUEST

• Other voltage ratings or 60 Hz frequency

WARRANTY

2 years in accordance with our general terms of sale

BC Submersible pumps

CHARACTERISTIC CURVES AND PERFORMANCE DATA

MODEL

Three- phase

| POWER (P2)| Q| m³/h| 0| 18| 30| 42| 54| 66| 78| 90| 102| 114
---|---|---|---|---|---|---|---|---|---|---|---|---|---
kW| HP| l/min| 0| 300| 500| 700| 900| 1100| 1300| 1500| 1700| 1900
BC 40/35| 3| 4|

H metres

| 21.4| 18.5| 16.6| 14.7| 12.8| 10.6| 8.2| 5.5|  |
BC 55/35| 4| 5.5| 25.8| 22.5| 20.6| 18.8| 17| 15| 12.9| 10.4| 7.5|
BC 75/35| 5.5| 7.5| 31| 27.5| 25.4| 23.5| 21.6| 19.8| 17.8| 15.6| 13| 10
MODEL

Three- phase

| POWER (P2)| Q| m³/h| 0| 18| 30| 45| 60| 75| 90| 108| 126| 138
---|---|---|---|---|---|---|---|---|---|---|---|---|---
kW| HP| l/min| 0| 300| 500| 750| 1000| 1250| 1500| 1800| 2100| 2300
BC 40/50| 3| 4|

H metres

| 16.5| 16| 14.8| 13.1| 11.1| 9| 6.8| 4.5|  |
BC 55/50| 4| 5.5| 21.5| 20| 19.1| 17.5| 15.6| 13.5| 11.3| 8.7| 6|
BC 75/50| 5.5| 7.5| 26.5| 24.5| 23.2| 21.5| 19.6| 17.5| 15.3| 12.4| 9.4| 7.5
POS.| COMPONENT| CONSTRUCTION CHARACTERISTICS
---|---|---
1| PUMP BODY| Cast iron with Epoxy Electro Coating treatment, with flanged and threaded port in compliance with ISO 228/1

2

| ****

IMPELLER

| ****

Cast iron with Epoxy Electro Coating treatment DOUBLE-CHANNEL type

3

| ****

MOTOR CASING

| ****

AISI 304 stainless steel

4

| ****

MOTOR CASING PLATE

| ****

Cast iron with Epoxy Electro Coating treatment

5

| ****

MOTOR SHAFT

| ****

AISI 431 stainless steel

6 TWO MECHANICAL SEALS SEPARATED

Seal Shaft

| ****

BY AN OIL CHAMB

Position

| ****

ER

| ****

Materials

|
Model| Diameter|  | Stationary ring| Rotational ring| Elastomer
AR- 27| Ø 27 mm| Motor side| Silicon carbide| Graphite| NBR
AR- 25| Ø 25 mm| Pump side| Silicon carbide| Silicon carbide| NBR

BEARINGS 6306 ZZ C3 / 6304 ZZ C3 ****

• ELECTRIC MOTOR three-phase 400 V – 50 Hz
  with automatically resettable thermal motor  protector built into the motor (THREE-PHASE)

• Insulation: class F

• Protection: IP X8

POWER CABLE “H07 RN-F” type
Standard length 10 metres

DIMENSIONS AND WEIGHT

MODEL

Three- phase

| Passage of solids| DIMENSIONS mm| ****

3~

---|---|---|---
a| b| c| h| h1| d| p| **
BC 40/35| **

Ø 35 mm

| ****

170

| ****

113

| ****

225

| 595| ****

100

| ****

40

| ****

800

| ****

500

| 56.0
BC 55/35| 635| 62.2
BC 75/35| 665| 67.0
BC 40/50| ****

Ø 50 mm

| ****

178

| ****

107

| ****

210

| 655| ****

150

| ****

85

| ****

800

| ****

500

| 58.5
BC 55/50| 695| 64.7
BC 75/50| 725| 69.4

PORT FLANGE

MODEL

Three- phase

| FLANGE

DN

| F| K

mm

| D

mm

| HOLES
---|---|---|---|---|---
N°| Ø (mm)
BC 40/35| ****

65

(PN10)

| ****

2½”

| ****

145

| ****

185

| ****

4

| ****

18

BC 55/35
BC 75/35
BC 40/50| ****

80

(PN10)

| ****

3″

| ****

160

| ****

200

| ****

8

| ****

18

BC 55/50
BC 75/50

ABSORPTION

MODEL

Three- phase

| VOLTAGE

400 V

---|---
BC 40/35| 6.2 A
BC 55/35| 8.3 A
BC 75/35| 13.5 A
BC 40/50| 7. 0 A
BC 55/50| 9. 0 A
BC 75/50| 13. 5 A

SEWAGE LIFTING SYSTEM

VERTICAL DELIVERY VERSION WITH ¾” GUIDE TUBES (B)

Kit comprising:

1. footing connection complete with counterflange;
2. slide guide with screws and seals;
3. support for guide tubes.

VERTICAL DELIVERY VERSION WITH 2″ GUIDE TUBES (C)

Kit comprising:

1. footing connection complete with counterflange;
2. slide guide with screws and seals;
3. support for guide tubes.

ACCESSORIES AVAILABLE ON ORDER

SLIDE GUIDE (Can also be ordered separately)

Complete with screws and seals

INTERMEDIATE SUPPORT (on request)

GUIDE TUBES (AISI 304 stainless steel)

1. To ensure stability, install the intermediate support: ­
2. every 2 metres with ¾” guide tubes (mandatory);
3. ­ every 3 metres with 2″ guide tubes (recommended).
4. Maximum length of the tube plank: 6 metres

DIMENSIONS (Horizontal delivery version)

Version with ¾” guide tubes

MODEL| Passage of solids

mm

| PORT

DN

| DIMENSIONS mm
---|---|---|---
a| b| c| d| e| p| h1| h2| h3| i1| i2| i3| i4| i5| Øg| Øm| Øn| Ør
BC /35| Ø 35| 3″| 231| ****

61

| ****

69

| ****

150

| ****

190

| 550| 69| ****

216

| ****

280

| ****

130

| ****

112

| ****

84

| ****

15

| ****

50

| ****

¾”

| ****

14

| ****

11

| ****

18

BC /50| Ø 50| 222| 553| 19

Version with 2″ guide tubes

MODEL| Passage of solids

mm

| PORT

DN

| DIMENSIONS mm
---|---|---|---
a| b| c| d| e| p| h1| h2| h3| i1| i2| i3| i4| i5| i6| Øg| Øm| Øn| Ør
BC /35| Ø 35| 3″| 319| 86| 95| 160| 200| 710| 107| 264| 392| 250| 150| 34| –| 80| 186| 2″| 22| 13.5| 18
BC /50| Ø 50| 328| 714| 57

TYPICAL INSTALLATION

1. Pump
2. Footing connection
3. Guide tubes
4. Support for guide tubes
5. Lifting chain
6. Control box
7. Alarm float switch
8. Starting float switch
9. Stop float switch
10. Non-return valve

The features and specifications here in are in no way binding for the manufacturer. Pedrollo S.p.A. reserves the right to modify the product in accordance with its production improvement policy at any time and without prior notice.

Pedrollo S.p.A. Via Enrico Fermi, 7 – 37047 San Bonifacio (Verona)
Italy tel. +39 045 6136311
fax +39 045 7614663
vendite@pedrollo.com – sales@pedrollo.com – www.pedrollo.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>