Hyuhome 26 36V 12.5Ah-13Ah Electric Bikes for Adult Bicycles All Terrain Instruction Manual

Hyuhome 26 36V 12.5Ah-13Ah Electric Bikes for Adult Bicycles All Terrain

Product Information

Specifications:

• Vehicle weight: TBD
• Load capacity: Max 120kg (including rider weight)
• Max speed: TBD
• Climbing ability: TBD
• Power: Electric
• Motor voltage: TBD
• Charging time: TBD
• Color: TBD

Product Usage Instructions

Mountain Bike Assembly:

1. Take out all parts from the carton.
2. Remove the protector from the front fork.
3. Use quick release to install the front wheel on the front fork, spin, and tighten the buckle.
4. Adjust the handlebar connector to face forward and tighten screws on both sides.
5. Insert the handlebar into the connector, screw up all screws, adjust, and tighten.
6. Install the saddle.
7. Insert the seat post into the seat post clamp, adjust height, and lock the buckle.
8. Install pedals with labels ‘R’ on the right side and ‘L’ on the left side. Tighten them securely.
9. Install front and rear mudguards.
10. Install the Rear Carrier.
11. Place the battery box on the stand, turn the key, and lock it.

Operation Instructions:

• Accelerate slowly when starting to avoid heavy start-up current.
• Use the pedal while climbing to increase mileage.
• Ride at a safe speed and do not overload (max load 120kg).
• Shut off power if not riding for a long time.

Parking:

• Shut off the power switch when getting off the bike.
• When parking, shut off the power and remove the key.

Maintenance:

• Ensure all screws are tightened.
• Check tires and driving system regularly.
• If not in use for a long time, charge once a week.
• Clean with a wet cloth and then wipe with a dry cloth (no watering).

Important Notes:

• Charge the battery in time before riding if it is out of power.
• Do not dismantle the bike without authorization.
• Avoid using the front brake first at high speeds.
• Avoid oil on the brake system.
• Ensure brakes, seat, frame, and handle are in good condition before riding.
• Avoid driving on stairs and stone roads.
• Keep the battery away from fire and do not remove the battery box shell.

FAQ:

• Q: How often should I charge the battery?
  A: If you ride regularly, it’s recommended to charge the battery once a week. If not in use, still charge it once a week to maintain battery health.

• Q: What is the maximum load capacity of the bike?
  A: The maximum load capacity is 120kg, including the weight of the rider. Do not overload the bike beyond this limit for safety reasons.

Assembly Instruction

• Step 1: Take out all parts from the carton.
• Step 2: Take off the protector from the front fork.
• Step 3: Using quick release to install the front wheel on the front fork, spin and tighten the buckle.
• Step 4: Adjust the handlebar connector to face forward and then tighten the screws on both sides.
• Step 5: Insert the handlebar into the connector, screw up all screws, and adjust again then tighten all screws.
• Step 6: Installing saddle.
• Step 7: Insert the seat post into the seat post clamp, adjust the height, and then lock the buckle.
• Step 8: Instaling pedal with the label“R” on the right side, and “J 》 on the left side.Must tighten them the first time.
• Step 9: Installing front mudguard and rear mudguard.
• Step 10: Installing Rear Carrier.
• Step 11: Put the battery box on the stand, turn the key, and lock it.

OPERATION INSTRUCTION

NOTES

1. Before riding, please read this operation instructions. Please check whether the parts are in good condition to ensure the safety of your riding.
2. Please slow down when you go through a slippery area on a rainy day and snowy day. To ensure safety, make sure there is enough braking distance.
3. This bike can be ridden on a rainy day and snowy day, but please do not put water into the bike. When the water goes into the motor wheel, it will cause an electrical short circuit and damage the electrical motor.
4. Please do not use wet hands to touch the battery.
5. Please don’t remove the parts. If it needs to change anything, please contact the professional bike repair workshop.
6. For the safety of others, please don’t let people who can not ride the bike well.

TECHNICAL PARAMETERS

CHARGING

1. When charging, the red indicator light of the charger will light up. When the light changes to green, it means that the battery is full.
2. Standard charging time: about 3~4 hours.
3. When charging, please keep children away from it.
4. The charger contains a high-voltage circuit, please do not open it without authorization.
5. When using and storing, please prevent liquid and metal scrap into the charger, to avoid damage.
6. When the charger is working, do not cover anything on it.
7. This charger is for indoor use only, please use it in a dry and ventilated environment.
8. When charging, if the temperature of the charger is too high or it smells bad. Please stop charging.

RIDING

1. Please accelerate slowly when the bike has just started. In order not to cause the start-up current too heavy and waste electricity, Starting with a pedal is better.
2. To increase the mileage, when climbing by bike, please use a pedal.
3. To ensure the safety, please do not ride too fast.
4. The maximum load is 120kg(including the rider’s weight). Do not overload.
5. If you don’t ride for a long time, please shut off the power.

PARKING

1. When you get off the bike, you should shut off the power switch.
2. When parking, you should shut off the power and remove the key.

MAINTENANCE

1. Before riding, please charge in time if the battery is out of power.
2. If the bike is without authorization, it will cause danger.
3. When the speed is high, please do not use the front brake first.
4. Do not put oil on the brake.
5. Please confirm the brake, seat, frame, handle are good before riding.
6. Please avoid driving on the stairs and stand-stone road。
7. Keep the battery away from fire.
8. Please do not remove the shell of the battery box.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>