Schreder 40 Tflex Combi Stainless Steel Tunnel Lighting Installation Guide
- July 16, 2024
- Schreder
Table of Contents
Schreder 40 Tflex Combi Stainless Steel Tunnel Lighting
Product Specifications:
- Brand : TFLEX COMBI
- Material : Stainless Steel
- Voltage : 220-240 V
- Frequency : 50/60Hz
- IP Rating : IP IK
- Weight :
- COMBI 40: 24.9 kg (54 lb)
- COMBI 60: 28.9 kg (63 lb)
- COMBI 100: 39.8 kg (87 lb)
Product Usage Instructions
Installation Instructions:
Follow the provided installation instructions in the manual for proper setup.
Mounting:
Use the fixed brackets provided for mounting, ensuring they are vibration-
compliant and suitable for the luminaire size.
Connection:
Use QPD connectors or cable glands for electrical connections. Ensure proper
cable gland sizes and connections as per the manual.
Main and Controls Separation:
Ensure proper separation and connections as indicated in the manual for mains
and controls.
Maintenance:
For any maintenance or repairs, always disconnect the power supply first. Wear
protective gloves when handling the product.
REQUIRED TOOLS
DIMENSION
FIXED BRACKETS
QPD CONNECTORS
SAFETY INSTRUCTIONS –
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person. Always switch
off the power prior to installation, maintenance or repair activities
RISK GROUP 2 – CAUTION! Hazardous optical radiation may be emitted from this product. Do not stare at the luminaire when operating as it may be harmful to the eyes. The luminaire should be positioned so that prolonged staring at the luminaire at a distance of less than 0.94m is not expected
ENERGY EFFICIENCY: This product contains a light source of an energy efficiency class G or higher or see the table on the first page
PVC INSULATION AND Y CONNECTION: In the case of PVC insulated mains cable, the installer MUST ensure that the WHOLE cable is protected against climatic conditions, especially UV rays and rain, by making sure that the cable is contained inside the luminaire and pole. Y-connection: In case of damage to the wire, it has to be replaced only by the manufacturer, distributor or an expert, to avoid risks
FAQ
Q: Can I use a different type of bracket for mounting?
A: Fixed brackets are provided and recommended for mounting due to their
vibration compliance. Ensure you use the correct bracket thickness as
specified.
Q: How do I connect the mains and controls?
A: Use the designated QPD connectors or cable glands provided with or without
cables for proper electrical connections. Follow the instructions for proper
connection.
Q: What precautions should I take during installation?
A: Always disconnect the power before installation, maintenance, or repairs.
Wear protective gloves to ensure safety during handling.