SIGMA NUGGET II Rear Light Instruction Manual

July 16, 2024
SIGMA

SIGMA-LOGO SIGMA NUGGET II Rear Light

Product Specifications

  • Model: NUGGET II
  • LED Safe
  • Water Resistance: IPX4
  • Battery: DC 5V / 1A
  • Charging Time: ~2 hours
  • Range: 400m
  • Mounting Height: 250 – 1200 mm

Product Usage Instructions

  • Alignment
    Ensure the final side of the tail lamp is perpendicular to the roadway and at right angles to the vehicle center axis.

  • Charging
    Always keep the silicone plug closed after charging to maintain protection.

Button Operation

  • Use the button to control the light:
  • 1 click = on
  • 1 click = off

Battery Indicator
If the red indicator is activated, charge the battery immediately. The LEDs are not replaceable; if one fails, replace the entire tail light.

  • Battery Levels:
  • 100% – 71%
  • 70% – 31%
  • 30% – 0%

Charging Process
During charging, the battery monitoring system lights up. Once fully charged, both indicators will turn off.

Mounting
Mount the light at a height between 250 – 1200 mm and ensure a secure fit using the provided O-rings bracket.

Frequently Asked Questions (FAQ)

  • Q: Can the LEDs be replaced?
    A: No, the LEDs are not replaceable. If an LED fails, the entire tail light needs to be replaced.

  • Q: What should I do if the red indicator is activated?
    A: If the red indicator is activated, it means the battery needs immediate charging to ensure proper functionality.

  • Q: Where can I find the CE declaration for the product?
    A: You can find the CE declaration at ce.sigmasport.com/nugget for compliance information.

ALIGNMENT

  • Final side of the tail lamp perpendicular to the roadway and at right angles to the vehicle center axis.

  • Reference axis parallel to the roadway

BUTTON

SIGMA-NUGGET-II-Rear-Light- \(3\)

BATTERY INDICATOR

  • The battery needs to be charged immediately if the monitoring device/red indicator has been activated. The LEDs are not replaceable. If an LED fails, replace the tail light.
    SIGMA-NUGGET-II-Rear-Light- \(4\)

CHARGING

  • Please always keep the silicone plug closed after charging.
    SIGMA-NUGGET-II-Rear-Light- \(5\)

  • Energy extraction through the Micro USB port is not possible. These lamp needs to be replaced in case of defective light source.SIGMA-NUGGET-II-Rear-Light- \(6\)

  • During charging, the battery monitoring system lights up.

  • If the battery is ready for use again, both indicators will go out after charging.

ACCESSORIES

  • Ref. No. 18552

  • Charger +

  • Charging cable Micro-USB Laddare +

  • Ref. No. 18553

  • Charging cable Micro-USB

  • Ref. No. 00468

  • O- ring bracket

MOUNTING

  • Do not cover the rear light!
  • Mounting height between 250 -1200 mm.
    SIGMA-NUGGET-II-Rear-Light- \(11\) SIGMA-NUGGET-
II-Rear-Light- \(12\)

CE INFORMATION

  • SIGMA-ELEKTRO GmbH hereby declares that the NUGGET II complies with the fundamental requirements and other relevant regulations of Directive 2014/30/EU and RoHS
  • Directive 2011/65/EU. You can find the CE declaration at:
  • ce.sigmasport.com/nuggetll
  • EN/SE/NO/FI
  • sigma.bike
  • SIGMA-ELEKTRO GmbH Dr.-Julius-Leber-Straße 15 67433 Neustadt/Wstr. Germany
  • service@sigma.bike

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals