Schreder 03-2024 Tflex Base Stainless Steel Installation Guide
- July 16, 2024
- Schreder
Table of Contents
Schreder 03-2024 Tflex Base Stainless Steel
INSTALLATION INSTRUCTIONS
- Led colour code 740 NW
- Light source energy efficiency class – High power: C
FIXED BRACKETS Ansi3G
Dimensions and weight
SAFETY INSTRUCTIONS
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. Always switch off the power prior to installation, maintenance or repair activities.
- RISK GROUP 2 – CAUTION! Hazardous optical radiation may be emitted from this product. Do not stare at the luminaire when operating as it may be harmful to
the eyes. The luminaire should be positioned so that prolonged staring at the luminaire at a distance of less than 0.94m is not expected.
ENERGY EFFICIENCY
This product contains a light source of an energy efficiency class G or higher
or see table on first page.
PVC INSULATION AND Y CONNECTION
In case of PVC insulated mains cable, the installer MUST ensure that the WHOLE
cable is protected against climatic conditions, especially UV rays and rain,
by making sure that the cable is contained inside the luminaire and pole.
Y-connection: In case of damage to the wire, it has to be replaced only by the
manufacturer, distributor or by an expert, to avoid risks.
www.schreder.com
Documents / Resources
|
Schreder 03-2024 Tflex Base Stainless
Steel
[pdf] Installation Guide
03-2024 Tflex Base Stainless Steel, 03-2024, Tflex Base Stainless Steel, Base
Stainless Steel, Stainless Steel, Steel
---|---