RYDEEN V90 AHD Vehicle Safety Camera Owner’s Manual

July 15, 2024
RYDEEN

RYDEEN logo CM-V90 Owner’s Manual
Included Items

V90 AHD Vehicle Safety Camera

RYDEEN V90 AHD Vehicle Safety Camera

Specifitions

Model CM-V90
Sensor SONY IMX307-LQR
Resolution 1945*1097
Frames 30fps
Min Illumination <0.1 Lux
Viewing Angle D 170°, H 175°, V 94°(+5°)
Power Voltage 5V
Video Output Signal AHD
Image Standard Image
Camera Lens Construction 6G +1IR
Water Proof IP67
Operation Temperature -20°C∼+65°C
Storage Temperature -30°C∼+85°C

Product Introduction

Thank you for purchasing the Rydeen CM-V90. The CM-V90 is a high definition backup camera which is compatible with the following Rydeen rear view mirrors (TOMBO 360, TOMBO 360X, 360 VIEW).

Installation of Camera Brackets

The CM-V90 can be mounted using any of the following methods. Choose the configuration that best suits your vehicle.
Use Wing Mount attached on camera (pre-installed)

Camera Installation Position Option

Rear windshield mounting location (Interior Top Mounted)RYDEEN V90 AHD
Vehicle Safety Camera - Position OptionAbove license plate mounting location (Exterior Mounted)RYDEEN
V90 AHD Vehicle Safety Camera - Position Option 1

Electrical Connection

RYDEEN V90 AHD Vehicle Safety Camera - Position Option
2

Note: The mirror should be the Rydeen products, please contact RYDEEN Technical Support for more detalls.

Application Scenario

CM-V90 has large Vertical Angle, over 90 degrees, compatible with RYDEEN digital monitors (TOMBO 360X, 360VIEW, PV8, R10), often used in mid-size car.

RYDEEN V90 AHD Vehicle Safety Camera - Position Option
3

Technical Support Contact Info

For any questions about CM-V90, please contact your retailer or RYOEEN Technical Support:

RYDEEN logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals