JOYROOM VCW-517 Magnetic Wireless Charger User Manual
- July 15, 2024
- Joyroom
Table of Contents
JOYROOM VCW-517 Magnetic Wireless Charger
Features
- Mag safe compatible.
- Easy operation and installation.
- Supports up to 15W fast wireless charging.
- Comes with an easy-to-install hook that securely attaches to the car air vent.
- Comes with an 18W quick-charge car charger.
What is in the Package
- Magnetic Wireless Charger
- Air Vent Hook
- Quick Charge 3.0 Charger
- Type-C Charging Cable
- User Manual
Descriptions
Instructions
-
Install the air vent hook to the back of the wireless charger.
-
Fix the magnetic wireless charger to the air vent of the car.
-
Insert the car charger into the cigarette lighter socket of the car. Connect the car charger and wireless charger with a type-c charging cable for charging.
Note: It can also be used with other USB-A or USB-C output adapters to power the wireless charger.
-
After power on, red light long on indicates that fast charging is supported. If you do not use it with the cable and quick charger in the package, the blue light may turn on to indicate that normal charging is supported.
-
This product is specially designed for magnetically adsorbing mobile phones. If your phone does not have a built-in magnet, you can use it with an iron sheet.
LED Indicator Status
Wireless Charging
- After the wireless charger is successfully installed in the car, you can fix your phone on it and wirelessly charge your phone.
- The device supports up to 15W wireless charging.
Note: Wireless charging only supports mobile phones enabled wireless charging function.
Specifications
- Wireless Charger Input: DC 5V/2A 9V/2A
- Baseline power profile: 15W Max
- Charging port: Type-C
- Standby power consumption: <0.5W
Troubleshooting
Safety Precautions
CAUTION
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Please note product features will be upgraded without any notice.
FCC STATEMENT
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used under
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines. This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body: Use only the supplied antenna.