Posey 5716 Soft Rails Instruction Manual

July 15, 2024
Posey

Posey-LOGO

Posey 5716 Soft Rails

Posey-5716-Soft-Rails-PRODUCT

Product Specifications

  • Model Numbers: REF 5716, REF 5716SC, REF 5718, REF 5718SC
  • Types: Soft Rails
  • Options: Double Bolster with Brushed Polyester Cover, Double Bolster with Vinyl Cover, Single Bolster with Brushed Polyester Cover, Single Bolster with Vinyl Cover
  • Material: Brushed Polyester or Vinyl
  • Attachment: Quick-release buckles

Product Usage Instructions

  • Inspect the product before use. Do not use if soiled or damaged.
  • Orient the Posey Soft Rails so that the removable bolster is on the bed exit side of the mattress.
  • Place the Posey Soft Rails on top of the mattress with quick-release buckles away from the resident.
  • Position the rails approximately 18 inches (46 cm) from the headboard.
  • Wrap the quick-release straps around the movable part of the bed frame and secure the buckles.
  • To remove the adjustable bolster, pull up to detach from the foundation.
  • To reattach the bolster, press down firmly to connect the hook-and-loop.
  • Remove the outside cover and machine wash in warm water on a gentle cycle.
  • Tumble dry on low heat.
  • Wipe clean with soap and water or disinfectant.
  • Properly dispose of the product according to your facility’s policy for biohazardous materials.
  • This device is suitable for normal indoor environments. Store in ambient warehouse temperatures with normal humidity levels. Avoid excess moisture or high humidity that may damage the product materials.

FAQ

  • Q: Can the Posey Soft Rails completely prevent falls from bed?
  • A: The Posey Soft Rails are designed to help prevent patients at risk for falls from rolling out of bed, but they are not a substitute for side rails or other protective devices. Always follow your facility’s policies and procedures for patient safety.
  • Q: How do I know which model to choose?
  • A: The model choice depends on your preference for bolster type (single or double) and cover material (brushed polyester or vinyl). Choose the one that best suits your needs.
  • Q: Are the Posey Soft Rails easy to install?
  • A: Yes, the Posey Soft Rails easily attach to the bed with quick-release buckles. Follow the application instructions provided in the manual for proper installation.

Introduction

Posey Soft Rails are a safe alternative to side rails and help prevent patients at risk for falls from rolling out of bed while allowing sufficient space for patient comfort. The adjustable bolster may be repositioned to accommodate individual resident needs or may be completely removed. The Posey Soft Rails easily attach to the bed with quick-release buckles and are available in machine-washable brushed polyester, or wipe-clean vinyl covers.

  • REF 5716 Soft Rails, Double Bolster, Brushed Polyester Cover
  • REF 5716SC Soft Rails, Double Bolster, Vinyl Cover
  • REF 5718 Soft Rails, Single Bolster, Brushed Polyester Cover
  • REF 5718SC Soft Rails, Single Bolster, Vinyl Cover

Posey-5716-Soft-Rails-FIG-1

Product Features

  • Soft, durable foam bolsters help deter unassisted bed exit and reduce the risk of rolling out of bed.
  • A removable/adjustable bolster increases the ease of patient bed exit. Also acts as a positioning device to increase patient comfort.
  • Quick-release buckles allow for easy attachment to the bed.
  • 33” (84 cm) length helps guard against rolling out of bed, without restricting bed exit.
  • 17” (43 cm) width between bolsters provides a comfortable sleeping area without restricting the patient.
  • The foundation measures 33” L x 33” W (84 cm x 84 cm) and will fit on top of a standard twin and hospital-style bed.
  • Individual bolsters are 33” L x 8” W x 8” H (84 cm x 20 cm x 20 cm).
  • Attachment straps are 35” (89 cm) long.
  • Meets CA #117, Section E Flame Retardancy Standards.

Monitoring

  • WARNING: This device is not a substitute for side rails or other protective devices for patients at risk of injury from falls due to unassisted bed exits. ALWAYS follow your facility’s policies and procedures for patient assessment, monitoring and rehabilitation.

Application instructions

  1. Inspect the product before use. DO NOT use soiled or damaged products.
  2. Orient the Posey Soft Rails so that the removable bolster is on the“bed exit” side of the mattress. Place the Posey Soft Rails on top ofthe mattress with quick-release buckles away from the resident.
  3. The Posey Soft Rails should be positioned approximately 18” (46 cm)from the headboard.
  4. Wrap the quick-release straps once around the movable part of the bed frame and secure the buckles.
  5. To remove the adjustable bolster, simply pull it up to detach it from the foundation.
  6. To reattach the bolster, press down firmly to connect the hook-and-loop.

Washing Instructions – Brushed Polyester Cover

  • Remove outside cover and machine wash (gentle cycle) in warm water; tumble dry low.

Cleaning Instructions – Vinyl Cover

  • Wipe clean with soap and water or disinfectant.

Disposal

  • WARNING: Properly dispose of the product per the facility’s policy for BIOHAZARDOUS materials.

Storage and Handling
This device is designed for use in normal indoor environments. This device may be stored in ambient warehouse temperatures at normal humidity levels. Avoid excess moisture or high humidity that may damage product materials.

CONTACT

  • TIDI Products, LLC
  • 570 Enterprise Drive, Neenah, WI 54956 USA
  • Phone: 1.800.521.1314
  • International: +1.920.751.4036
  • www.tidiproducts.com

© 2024 TIDI Products, LLC. All rights reserved. Posey is a registered trademark of TIDI Products, LLC.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals