Posey 5708 Side Rail Wedge Instruction Manual

: July 15, 2024
: Posey

Table of Contents

Posey 5708 Side Rail Wedge
Specifications
Product Usage Instructions
FAQ
Introduction
Monitoring
Application Instructions
Cleaning Instructions
Storage and Handling
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Posey 5708 Side Rail Wedge

Specifications

Model: Posey Side Rail Wedges
Material: Durable, medium-density foam covered in soft, water-repellent vinyl
Flame Retardancy Standards: Meets CA #117, Section E
REF 5708: 35L x 17H x 2D (89 cm x 43 cm x 5 cm)
REF 5708S: 30L x 17H x 2D (76 cm x 43 cm x 5 cm)

Product Usage Instructions

Posey Side Rail Wedges are designed to help protect patients from injury but will not prevent determined patients from exiting the bed. Do not articulate the bed if the product is applied. Always adhere to your facility’s policies for patient assessment, monitoring, and rehabilitation.

Inspect the product before use. Do not use soiled or damaged products.
With the bed flat, position the Side Rail Wedge on the inside of the side rail to fit snugly between the mattress and the side rail.
Open the hook and loop straps and secure the Side Rail Wedge to the side rail.
Check for proper fit. Note that modified beds may not be compatible with Posey Side Rail Wedges.

Multiple Uses of Side Rail Wedges

Use one to close the gap between half-side rails.
Use one to cover the half-side rail at the head or foot of the bed.
Zip two together to provide full-length protection up to 6′ (1.83 m) of double half rails, three-quarter, or full side rails.
Use one at the head or foot of the bed to cover/protect the headboard or footboard.
Wipe clean with soap and water or disinfectant regularly to maintain hygiene.
Properly dispose of the product following your facility’s policy for BIOHAZARDOUS materials.

This device is suitable for use in normal indoor environments. Store in ambient warehouse temperatures with normal humidity levels to avoid damage. Refer to the Posey Catalog for compatibility with specific bed models.

FAQ

Q: Can Posey Side Rail Wedges prevent all patients from exiting the bed?
A: No, they are designed to help protect patients but may not prevent determined patients from leaving the bed.
Q: How should I clean the Side Rail Wedges?
A: Wipe them clean with soap and water or a disinfectant regularly.
Q: Can I use Posey Side Rail Wedges on any type of bed?
A: They are compatible with most standard beds, but modified beds may not be suitable for use with Side Rail Wedges. Check for compatibility before use.

Introduction

Posey Side Rail Wedges help protect patients from injury by helping close the gaps around the perimeter of the mattress and by cushioning the side rails and the headboard or footboard. They also help to deter the patient’s release of restraints. Each Side Rail Wedge attaches with hook and loop straps and is made of durable, medium-density foam and covered in soft, water-repellent vinyl. Meets CA #117, Section E Flame Retardancy Standards.

REF 5708 35”L x 17”H x 2”D (89 cm x 43 cm x 5 cm)
REF 5708S 30”L x 17”H x 2”D (76 cm x 43 cm x 5 cm)

Monitoring

WARNING: Posey Side Rail Wedges will not prevent a determined patient from exiting the bed, going over, or attempting to go between or through side rail gaps. DO NOT articulate the bed if the product is applied. ALWAYS follow your facility’s policies and procedures for patient assessment, monitoring, and rehabilitation.

Application Instructions

Inspect the product before use. DO NOT use soiled or damaged products.
With the bed flat, position the Side Rail Wedge on the inside of the side rail so that the wedge fits snugly between the mattress and the side rail (Fig. 1).
Open the hook and loop straps and reapply them so that the side Rail Wedge is secured to the side rail.
Check for proper fit. Modified beds may not be compatible with Posey Side Rail Wedges.

Side Rail Wedges have multiple uses

Figure A: Use one to close the gap between the half-side rails.
Figure B: Use one to cover the half-side rail at the head or foot of the bed.
Figure C: Zip two together to provide full-length protection up to 6’ (1.83 m) of double half rails, three-quarter, or full-side rails.
Figure D: Use one at the head or foot of the bed to cover/protect the headboard or footboard.

Cleaning Instructions

Wipe clean with soap and water or disinfectant.

Disposal

WARNING: Properly dispose of the product per the facility’s policy for BIOHAZARDOUS materials.

Storage and Handling

This device is designed for use in normal indoor environments. This device may be stored in ambient warehouse temperatures at normal humidity levels. Avoid excess moisture or high humidity that may damage product materials.
Refer to the Posey Catalog for the Posey product/bed cross-reference guide to check for compatibility with certain bed models.