MiBoxer PUSH2 2.4GHz Wireless Dimming RGB+CCT Owner’s Manual

MiBoxer PUSH2 2.4GHz Wireless Dimming RGB+CCT

Product Information

Specifications

• Product Name: 2.4GHz Wireless Dimming (RGB+CCT)
• Model No.: PUSH2
• Input Voltage: 3V CR2032 * 1PCS
• Transmitting Power: RF 6dBm 2.4GHz
• Control Distance: 30m
• IP Rating: IP20
• Working Temperature: -10~40°C
• Standby Power Consumption:

Product Usage Instructions

1. Connection to PUSH Switch
   To connect the MiBoxer Wireless Dimming to the PUSH switch, follow these steps:

2. Insert the CR2032 battery into the device.

3. Press and hold the pairing button on the device until the LED indicator blinks.

4. Press the pairing button on the PUSH switch within 30 seconds to establish the connection.

5.  Wireless Dimming Control

6. You can easily implement wireless dimming with existing MiBoxer / Mi-Light 2.4G series lamps using the PUSH switch:

   • Control multiple MiBoxer / Mi-Light 2.4G series lamps within a 30-meter range.
   • Adjust color, color temperature, brightness, and switch of the light using the PUSH switch.

Frequently Asked Questions (FAQ)

• Q: Can I control other brands’ lights with this wireless dimming system?
  A: The system is designed to work specifically with MiBoxer / Mi-Light 2.4G series lamps and may not be compatible with other brands’ lights.

• Q: What should I do if the control distance is shorter than 30 meters?
  A: Ensure there are no obstructions or interference in the signal path between the PUSH switch and the lamps for optimal control distance.

2.4GHz Wireless Dimming (RGB+CCT)
Model No.: PUSH2

Features

• MiBoxer Wireless Dimming features an easy connection to the PUSH switch, eliminating the need for tedious installation steps. Easily implement wireless dimming with existing MiBoxer / Mi-Light 2.4G series lamps. The control distance is 30 meters, supports controlling multiple MiBoxer /
• Mi-Light 2.4G series lamps, and supports controlling the color, color temperature, brightness and switch of the light through the PUSH switch.
• CR2032 battery powered
• No wiring required, easy to implement PUSH switch to wirelessly control the color, CCT, brightness and switch of lights.
• Compatible with MiBoxer / Mi-Light 2.4G series lamps.
• Using 2.4G RF wireless transmission technology, the control distance is 30 meters, and the number of lamps is unlimited.
• Supports 4096 levels of smooth dimming, the lowest brightness is 0.1%.
• Dimming range: 0.1%-100%

Product Parameters

• Product Name: 2.4GHz Wireless Dimming (RGB+CCT)
• Model No.: PUSH2
• Input Voltage: 3V (CR2032*1PCS)
• Transmitting Power. 6dRml
• RF: 2.4GHz
• Control Distance: 30m
• IP Rating: IP20
• Working Temperature: -10~40°C
• Standby Power Consumption: <34A
• Dimming Grayscale: 4096 Levels
• Dimming Range: 0.1%-100%
• EMC Standard (EMC): ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-3 V2.1.1
• Safety Standard (LVD): EN 61347-1: 2015+A1: 2018 EN 61347-2-11: 2001+A1:201
• Radio Equipment (RED): ETSI EN 300 440 V2.2.1
• Certification:: CE, EMC, LVD, RED

Connection Diagram

Install batteries

1. Open battery cover
2. Install CR2032 battery （Requires separate purchase）
3. Close the battery cover

Linking Code Instructions

1. Power off, then power on again after 10 seconds
2. Short press the “SET” 3 times within 3 seconds
3. The lamp flashes slowly 3 times, indicating successful linking

If the lamp does not flash slowly, the code binding failed, please re-perform the above steps. (Note: Already coded lamps cannot be coded again)。

Unlinking Code Instructions

1. Power off, then power on again after 10 seconds
2. Short press the “SET” 5 times within 3 seconds
3. The lamp flashes quickly 10 times, indicating successful unlinking

If the light does not flash quickly, the code clearing failed, please perform the above steps again.
(Note: Already coded lamps cannot be coded again)。

Dimming control

• ON/OFF/Brightness
  Short press to turn on/off the light, long press to adjust the light brightness.

• CCT
  Short press to switch to white light, long press to adjust color temperature.

• RGB
  Short press to switch to colored light, long press to adjust the light color.

Notice

1. Please do not use it in a humid or high temperature environment for a long time. When not in use for a long time, please remove the battery and store it in a dry, static-free environment.
2.  Do not use it in an environment with a large area of metal or near strong electromagnetic waves, otherwise the control distance will be seriously affected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>