DOSS SoundBox Pro Plus Stereo Wireless Bluetooth Speaker User Guide

Stereo Wireless Bluetooth Speaker Model Name: SoundBox Pro+
Quick Start Guide

Packing content

• DOSS SoundBox Pro+ x 1
• Micro USB charging cable x 1
• User manual x 1

Specifications

Bluetooth version: V5.0
Range: 20 m/66ft
Output: 12W x 2
Input: 5V=2A
Battery: Li-ion 3.7V=4400mAh
Weight: 758g
Unit dimension: 8.9 x 3.3 x 3.5 inches
Play time: 15 hours ( at 50% volume )
Warranty: One-year

Product overview

Buttons and controls

Answer/end a call
Disconnect the device| Press and hold
Reject a call
7| MODE| Switch modes| Press
Change the light colors| Press and hold
8| | Use handfree function| Speak to the Mic
9| ****| Play via audio-in| Plug in AUX cable
10| | Play via Micro SD card| Insert the Micro SD card
11| | Charge the speaker| Insert the charging cable
12| | Reset the speaker| Poke it with a needle

Indicators

Pairing your device via Bluetooth

1. Enable Bluetooth on your device and search for the speaker.
2. Select SoundBox Pro+ on the Bluetooth list.
3. Once paired, you can see the connected status on your device.

• The speaker will auto power off after 15 minutes without any media input. To remove the function, please contact < support@dossav.com > for support.
• The music volume will drop down 15% automatically when the speaker is on low battery.

Having problems connecting?

• Make sure that your device is within 1 meter from the speaker.
• Press and hold the Play/Pause button for 5 seconds.
  Still have problems? Contact DOSS customer service at support@dossav.com for assistance.

Pairing your device via Auxiliary cable

Play via 3.5mm Auxiliary cable(not supplied)

Play music from a Micro SD card

Play in download order
Support capacity: 32G or less
Support format: MP3, WAV, WMV

How to set up true wireless stereo pairing

• Make sure both speakers didn’t connect to any device via Bluetooth, if they did, please press and hold play/pause button for 5 seconds.
• Turn on both speakers.
• Press and hold the ADD button on one of the speakers for 3s.
• Waiting for pairing.
• Once paired successfully, the speaker with the left led on is the Primary, the speaker with the right led on is the Secondary.
• Turn on Bluetooth on your device and select DOSS Soundbox Pro+ on your Bluetooth list.

Warning
DO NOT drop, hit or shake the speaker.
DO NOT disassemble, repair or modify the speaker by yourself.
DO NOT use cleaning products that contain benzene, solvents or alcohol.
DO NOT expose the speaker to excessive heat or direct sunlight for a long time.
DO NOT store the speaker in a place with humidity or dust.
DO NOT place heavy objects on top of the speaker.
DO NOT use the speaker near a microwave oven or wireless LAN products.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
1.This device may not cause interference.
2.This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.

For updates, promotions, and experience sharing, join our customer community.
@dossav / @dossfans
@dossdirect
www.dossaudio.com
1-833-275-3677 Mon-Fri 9AM-5PMPT (USA)
Customer Service Email:
US: support@dossav.com
UK: support_uk@dossav.com
FR: support_fr@dossav.com
IT : support_it@dossav.com
CA: support_ca@dossav.com
DE: support_de@dossav.com
ES: support_es@dossav.com
JP: support_jp@dossav.com

| EVATOST CONSULTING LTD
Suite 11, First Floor, Moy Road Business
Centre, Taffs Well, Cardiff, Wales, CF 15 7QR
contact@evatmaster.com
---|---
| eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main,Germany
contact@evatmaster.com

Wonders Technology Co.,Ltd

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>