Televes AZS612FZ F 6W Terminal Tap Owner’s Manual
- July 13, 2024
- Televes
Table of Contents
Televes AZS612FZ F 6W Terminal Tap
Product Specifications
- Frequency Range: 5 – 2400MHz
- Tap Loss : 12dB
- Connectors: F connectors
- Signal Type: SMATV
- Shielding: Class A
- Installation: Indoor
- Chassis Material: Zamak
- Assembly Options: Wall, rack plate, standard DIN rail
- Packing : 10-unit boxes
- Weight : Net – 125.00g, Gross – 125.00g
- Dimensions : Width – 176.00mm, Height – 54.00mm, Depth – 18.00mm
Product Usage Instructions
-
Installation:
The 6-way tap is designed for indoor installation. It can be mounted on the wall, rack plate, or standard DIN rail assembly. -
Connection:
Connect the F connectors of the tap to the corresponding input and output cables for SMATV signals. -
Grounding:
Ensure to use the included ground screw for proper grounding to avoid electrical issues. -
Maintenance :
Regularly check the connections and overall condition of the tap to ensure optimal signal distribution.
F 6W terminal tap 5…2400MHz 12dB
6-way tap with F connectors, for SMATV signals. Its tap losses (12dB) as well
as the lack of pass output, make it suitable for installation in floor 1. It
presents a high efficient electrical behavior thanks to the miniaturization
applied in the electronic components included. In addition, its Zamak chassis
provides great shielding. It is conceived for indoor installation, for wall,
rack plate or standard DIN rail assembly. Supplied in 10-unit boxes.
- Ref. 519362
- Logical ref. AZS612FZ
- EAN13 8424450267950
Packing
- Box 10 pcs.
Physical data
- Net weight 125.00 g
- Gross weight 125.00 g
- Width 176.00 mm
- Height 54.00 mm
- Depth 18.00 mm
Highlights
- Assembly flexibility: it can be installed screwed to the wall, on rack plates with nuts on their connectors, or on a standard DIN rail (with adapter ref. 519901)
- Comfortable screwing of the cable, thanks to a 10º inclination angle of the F-connectors from the installation wall
- Space optimization in registers and cabinets: their inputs/outputs are always located on the same side
- Better organization of the installation: allows cabling passage through its rear part
- F-Series elements can be chained between them with the ground screw, requiring in this case a single grounding cable
- Signal level is maintained in outlets, even with long cable deployment, thanks to a better flatness response
- Outstanding reliability: robotized manufacturing using new generation micro-components 100% European design, quality and manufacturing
Main features
- Great shielding (class A), made of Zamak
- F connectors with a longer threaded length, to facilitate and secure the installation on a rack plate
- Indoors installation
- Ground screw included
- Does not have any pass outputs
FAQ
Q: Can the 6-way tap be used for outdoor installations?
A: No, the tap is specifically designed for indoor use.
Q: Does the tap have pass outputs?
A: No, the tap does not have any pass outputs.
Q: What is the material used for shielding?
A: The tap features great shielding made of Zamak for improved signal quality.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>