B-TECH DD 700 Weighing Terminal User Guide
- June 3, 2024
- B-TECH
Table of Contents
B-TECH DD 700 Weighing Terminal
Unpacking and Installation
Take the terminal, quick start guide, USB with manual, and sealing screws out of the package.
Available connections
- A. Optional board slots
- B. Scale 1
- C. COM1 port
- D. COM2 port
- E. Terminal board for I/O.
- F. Serial USB port
- G. HOST USB port
- H Power supply 12 V (by means of external power supply)
- I Digital scale (optional) or Analog scale 2 (optional)
- J. Calibration Switch
- K. N/A
- L. 12V Power Supply Input
Install the terminal. Press to turn on the terminal.
Display
| Stable weight| | ****
Zero
---|---|---|---
| ****
Tare
| | Tare
entered from keyboard
| Minimum weight| | Gross weight in pounds
| Weighing range indication| | ****
Net weight
| Weight within range indication| | Weight below range indication
| | | Weight above range indication
Keyboard
| ****
Zero scale
| | Entering and deleting tare weight
---|---|---|---
| Entering and deleting tare weight| | Printing and/ or starting transmission
| Customizable
keys
| | ****
Enter
| Alphanumeric keys and symbols| | On/Off
Truck In and Out (ID#)
Inbound
- Truck pulls on scale (light or heavy)
- Press “I.D. #” key ( on keypad)
- Key in truck’s ID# (keys are alphanumeric like cellphone, so you may have to press a key repeatedly toget desired character or use the USB keyboard)
- Press Enter key
- Display returns to weight on scale withExample “RcD ID: 1234” below the weight.
- Press Print key.
- Ticket prints with time, date, ID# and inbound weight
Outbound
-
Truck returns to scale (heavy or light)
-
Press “I.D.#” key ( key on keypad)
-
Key in truck’s ID# If ID# is the same, just pressENTER, you don’t have to key it in again.
-
Press Enter key
-
Display returns to weight on scale with
Example “RcD ID: 1234” and “Inbound W eight: 15000lb” below it. -
Press Print key.
-
Ticket prints with time, date, ID# and Gross, Tare, andNet weights.
After outbound print, truck ID# is erased from memory and can be used again.
800.266.8900 • Fax: 330.471.8909 Monday – Friday 7:00 AM – 5:00 PM www.B-TEK.com • sales@b-tek.com Technical Support: 330 754-3880 x2
Connection of Analog Load Cells (Female DB9 Connector
COM1 & COM2 Serial Port Connection in RS232 (Male DB9 Connector)
Connection of COM2 in RS422 Configuration (Male DB9 Connector)
800.266.8900 • Fax: 330.471.8909 Monday – Friday 7:00 AM – 5:00 PM www.B-TEK.com • sales@b-tek.com Technical Support: 330 754-3880 x2
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>