OSD AUDIO XMP300BT, XMP100BT Stereo Power Amplifiers Owner’s Manual

XMP300BT, XMP100BT Stereo Power Amplifiers

“`html

Specifications:

• Model: XMP100BT Gen2 / XMP300BT Gen2

• Amplifier Type: Stereo Four Channel (2A,
  2B)

• Design Type: Digital Class D

• Bluetooth (version): V5.3

• Rated Output Power:

  • 8-Ohm Load: 50W x 2 Channel RMS/Output, 100W x 2 Channel
    RMS/Output

  • 4-Ohm Load: 100W x 2 Channel RMS/Output, 200W X 1 Channel RMS
    (A or B)/Output

• Frequency Response: 20Hz – 20kHz

• Impedance: 8-Ohm to 4-Ohm Stable

• Signal to Noise Ratio: 90dB

• Channel Separation: 50dB @1kHz referred to 50W
  Output into 8

• Input Sensitivity: 700mV Input rated 50W
  Output into 8

• Sources/Inputs: Bluetooth/USB/Line-In
  (Interupt/Main)

• Output THD: Lowpass Filter

• Bass and Treble Controls: (+/-) 12dB @ 100Hz
  and 10kHz

• Other Back Panel Controls: Trigger
  Functions/Bridged Mono-Stereo

• Front Panel Controls: Power/Speaker
  (A/B)/Balance/Volume

• AC Power: Multi-Voltage 100V-240V
  50-60Hz/250V

• Dimensions: 430mm W x 44.0mm H x 159.4mm D
  (XMP100BT Gen2), 430mm W x 44.0mm H x 201.20mm D (XMP300BT
  Gen2)

• Net Weight: 2.4 KG/5.29 Pounds (XMP100BT
  Gen2), 3.2 KG/7.05 Pounds (XMP300BT Gen2)

Product Usage Instructions:

XMP100BT Gen2 Front Panel Controls:

• Power Switch: Turn the power On (Green LED) or
  OFF; LED changes to Red when in Standby.

• Speaker Selector: Choose between Speaker A,
  Speaker B, or Both.

• Balance Knob: Adjust the speaker output
  between the R & L channels.

• Volume Control Knob: Adjust the volume
  level.

XMP100BT Gen2 Rear Panel:

The rear panel includes various inputs and outputs for
connecting to different devices and speakers.

XMP300BT Gen2 Specifications:

Detailed specifications for the XMP300BT Gen2 model with similar
functionalities as XMP100BT Gen2 but with higher power output.

Applications:

The product can be used for stereo setups or multiple source
setups in distributed audio systems, allowing for flexibility in
audio distribution.

Frequently Asked Questions (FAQ):

Q: What should I do if any part of the product is damaged or

missing?

A: In case of any damage or missing parts, please contact your
dealer for assistance.

Q: How do I switch between different speakers on the XMP100BT

Gen2?

A: You can use the Speaker Selector on the front panel to choose
between Speaker A, Speaker B, or both simultaneously.

Q: Can I adjust the bass and treble settings on the

amplifier?

A: Yes, you can adjust the bass and treble controls on the
amplifier to customize your audio output.

Q: What is the power output of the XMP300BT Gen2 in bridged

mono mode?

A: The XMP300BT Gen2 provides a power output of 600W X 1 Channel
RMS in bridged mono mode.

“`

XMP300BT Gen2 / XMP100BT Gen2 Stereo Power Amplifiers
OWNERS’S MANUAL

Cover Sheet

775 Columbia St, Brea, CA 92821

www.osdaudio.com

XMP100BT Gen2 / XMP300BT Gen2

FEATURES: XMP100BT Gen2 / XMP300BT Gen2
· Automatic Source Switching Interrupt-Priority/Main · Main Input with Main Output Pass thru · Speaker A or B, A and B w/Front panel Switches’ · Front Panel Balance and Volume Controls · Signal Sensing “Power On” and Trigger In/Out · Rear Mounted Bass and Treble Controls · Internal Bluetooth Source/ USB Music Playback

Congratulations on your purchase of this product.
Please take a few moments to read this entire manual, And be sure to retain this document for future reference. Please read and observe all safety instructions detailed. NOTE: If any part of this product is damaged or missing, please call your dealer. Please read your warranty and retain your receipt and original carton for possible future use.

XMP100BT Gen2

FRONT PANEL CONTROLS
2
1

3

4

1. Power Switch Power On (Green LED) or OFF LED changes to Red when in Standby
2. Speaker Selector Select Speaker A or Speaker B or Both at once

3. Balance Knob Fades Speaker output between the R & L Channels
4. Volume Control Knob Adjusts Volume Level

1

775 Columbia St, Brea, CA 92821

www.osdaudio.com

REAR PANEL

XMP100BT Gen2 / XMP300BT Gen2

XMP300BT Gen2 XMP100BT Gen2
2

775 Columbia St, Brea, CA 92821

www.osdaudio.com

XMP100BT Gen2 / XMP300BT Gen2

XMP300BT Gen2

Specifications: Model
Amplifier Type Design Type
Bluetooth (version) Rated Output Power
8-Ohm Load 4-Ohm Load Bridged Mono Frequency Response Impedance Signal to Noise Ratio
Channel Seperation Input Sensitivity Sources/Inputs Output THD
Bass and Treble Controls Other Back PanelControls
Front Panel Controls AC Power Dimensions
Net Weight
3

XMP100BT Gen2
Stereo Four Channel (2A, 2B) Digital Class D Bluetooth V5.3 200 Watts Max
50W x 2 Channel RMS/Output 8-ohm 100W x 2 Channel RMS/Outout 4-ohm 200W X 1 Channel RMS (A or B)/Output 8
20Hz – 20kHz 8-Ohm to 4-Ohm Stable
90dB 100W output into 4-ohms 20kHz 20kHz Lowpass Filter
50dB @1kHz referred to 50W Output into 8 700mV Input rated 50W Ouptu into 8 Bluetooth/USB/Line-In (Interupt/Main)
Signal (low) level/Speaker (High) Level Outputs
«1% @ ouput Rated power / « 0.07%@ output 1~80W
(+/-) 12dB @ 100Hz and 10kHz Trigger Functions/Bridged Mono-Stereo
Power/Speaker (A/B)/Balance/Volume Multi-Voltage 100V-240V 50-60Hz/250V
430mm W x 44.0mm H x 159.4mm D 16.92″ W x 1.73″ H x 6.27″ D 2.4 KG/5.29 Pounds

XMP300BT Gen2
Stereo Four Channel (2A, 2B) Digital Class D Bluetooth V5.3 600 Watt Max
150W x 2Chanel RMS/Output 8-ohm 300W x 2 Channel RMS/Output 4-ohm 600W X 1 Channel (A or B)/Output 8
20Hz – 20kHz 8-Ohm to 4-Ohm Stable
90dB 300W output into 4-ohms 20kHz 20kHz Lowpass Filter
50dB @1kHz referred to 150W Output into 8 700mV Input rated 150W Output into 8 Bluetooth/USB/Line-In (Interupt/Main)
Signal (low) level/Speaker (High) Level Outputs
«1% @ ouput Rated power / « 0.07%@ output 1~240W (+/-) 12dB @ 100Hz and 10kHz Trigger Functions/Bridged Mono-Stereo
Power/Speaker (A/B)/Balance/Volume Multi-Voltage 100V-240V 50-60Hz/250V 430mm W x 44.0mm H x 201.20mm D
16.92″ W x 1.73″ H x 7.92″ D 3.2 KG/7.05 Pounds

775 Columbia St, Brea, CA 92821

www.osdaudio.com

XMP100BT Gen2 / XMP300BT Gen2

APPLICATIONS
STEREO SETUP
In this configuration, the mode switch is set to “Stereo”. Connect the line out jacks from a stereo pre-amplifier or source to the MAIN input jacks of your XMP300BT Gen2. Next connect your speakers to the terminals marked “Speaker A” observing proper polarity. Select the “A” speakers using the front panel zone selection buttons. Connect a second (optional) pair of speakers to the terminals marked “Speaker B”. If you are connecting 4 speakers to the XMP300BT Gen2 they must be 8-ohm speakers only. Press A and B together to use both zones

Back Panel RCA Inputs/outputs

SETUP FOR MULTIPLE SOURCE
In the multiple source set up, a distributed audio system is connected to the XMP300BT Gen2 as a local zone amplifier via the MAIN inputs. Normally the distributed audio system will be the audio source for the XMP300BT Gen2 The distributed audio is then passed on to be used by additional zones or sub zones in the distributed system via the MAIN outputs.

Back Panel RCA Inputs/outputs

(From Local Source Line Out) (From Pre-amp Line Out) (Out to Additional Zones)
The audio output of a local source, such as an MP3 Player, CD, television, computer, etc., is connected to the XMP300BT Gen2 via the INTERRUPTING inputs, and whenever the local source is active its signal will take priority over the distributed audio signal present at MAIN input . However, the distributed audio signal will still be present at the MAIN input. In this circumstance the audio output of the local source will be heard via the XMP300BT Gen2. Once the local source is turned off or muted, the XMP300BT Gen2 will automatically switch back to the distributed audio system as an audio source, assuming the local source remains inactive. There is a delay of up to 6 seconds when switching from INTERRUPTING input back to MAIN inputs.

PAIRING BLUETOOTH
Pair Button located on the Back Panels of the XMP100/300 BT Gen2. Press the White Button, see the Front Panel Blue Power Button LED indicator starts to Flash in Setup mode. Select OSD BT SPKR on the Bluetooth Enabled Device. If the connection is successful, The Power LED will change from Flashing to a steady Blue.

Front Panel Power Button w/Status LED

Back Panel Bluetooth Pairing Button

4

775 Columbia St, Brea, CA 92821

www.osdaudio.com

XMP100BT Gen2 / XMP300BT Gen2

5

775 Columbia St, Brea, CA 92821

www.osdaudio.com

XMP100BT Gen2 / XMP300BT Gen2
Limited Warranty
OSD Audio warrants its amplifier products against defects in materials and workmanship for a limited period of time. For a period of two years from date of original purchase, we will repair or replace the product, at our option, without charge for parts and labor. Customer must pay all parts and labor charges after the limited warranty period expires. The limited warranty period for factory refurbished products expires after ninety (90) days from date of original purchase.
This limited warranty applies only to purchases from authorized OSD Audio electronics retailers. This limited warranty is extended only to the original purchaser and is valid only to consumers in the United States.
Consumers are required to provide a copy of the original sales invoice from an authorized OSD Audio dealer when making a claim against this limited warranty. This limited warranty only covers failures due to defects in materials or workmanship that occur during normal use. It does not cover failures resulting from accident, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, modification, service by anyone other than OSD Audio, or damage that is attributable to Acts of God. It does not cover costs of transportation to OSD Audio or damage in transit. The customer should return his defective product, freight prepaid and insured, to OsdAudio ® only after receiving a Return Authorization.
This warranty will become void if the serial number identification has been wholly or partially removed, altered or erased. Repair or replacement under the terms of this warranty does not extend the terms of this warranty. Should a product prove to be defective in workmanship or material, the consumer’s sole remedies will be repair or replacement as provided under the terms of this warranty. Under no circumstances shall OSD Audio be liable for loss or damage, direct, consequential or incidental, arising out of the use of or inability to use the product. There are no express warranties other than described above.

6

775 Columbia St, Brea, CA 92821

www.osdaudio.com

FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Back Cover

775 Columbia St, Brea, CA 92821

www.osdaudio.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>