TCL MOVEAUDIO S600 Wireless Earbuds User Manual
- June 15, 2024
- TCL
Table of Contents
TCL MOVEAUDIO S600 Wireless Earbuds
Specifications
- Model : TW30
- Bluetooth compatibility : Bluetooth profile
- Operating temperature : 20°C
Important Safety Information:
Read all the safety information before using your product. Failure to
follow these safety instructions could result in injury, or damage to your
product or other property.
Important Handling Information:
Handle your earbuds and the case with care. They contain sensitive
electronic components, including batteries, and can be damaged if dropped,
burned, punctured, crushed, disassembled, or if exposed to excessive heat or
liquid. Clean your device regularly with a dry and soft cloth. Do not use
liquids or cleaning products.
Note : Before cleaning, remove earbuds from the case, and disconnect the USB cable from both the case and your computer or power adaptor.
Bluetooth:
This product is designed for use with mobile devices that support Bluetooth
standards specified by Bluetooth SIG, Inc. and are compatible with the
following Bluetooth profile: Bluetooth profile.
Hearing Loss:
Listening to sound at high volume may cause permanent hearing loss. Check
the volume after inserting earbuds in your ears and before playing audio.
WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods.
Medical Device Interference:
Your device contains magnets that may interfere with medical devices such
as pacemakers, defibrillators, or other medical devices within the range of 15
cm (6 inches). IF YOU ARE A USER OF ANY OF THESE MEDICAL DEVICES, PLEASE
CONSULT WITH YOUR PHYSICIAN.
Choking Hazard:
Your device may present a choking hazard or cause other injury to small
children. Keep them away from small children.
Charging:
Charge the case with the supplied USB cable. Only charge with an adaptor
that is compliant with the applicable international and regional safety
standards. Charging with other adaptors could causedamage to the case or pose
a risk of injury or death. It is important to keep your device and the power
adaptor in awell-ventilated area when charging. Don’t use damaged cables or
chargers.
Battery:
Do not attempt to replace the device batteries yourself. You may damage the
batteries, which could cause overheating and injury. The batteries in your
device should be serviced only by an authorized service provider. Batteries
must be recycled or disposed of separately from household waste. Don’t
incinerate the batteries. Check your country’s local waste regulations for the
proper disposal of electronic products.
Operating Temperature:
The recommended operating temperature for your device is 20°C.
Regulatory Compliance Informatio0n:
This section introduces regulatory information, certification, and
compliance information specific to your product.
Electromagnetic Fields (EMF):
This product complies with all applicable standards and regulations
regarding exposure to electromagnetic fields.
FCC Compliance Statement:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operated
in conjunction with any other antenna or transmitter.
Important safety information
Read all the safety information before using your product. Failure to follow
these safety instructions could result in injury or damage to your product or
other property.
Important handling information
- Handle your earbuds and the case with care. They contain sensitive electronic components, including batteries, and can be damaged if dropped, burned, punctured, crushed, disassembled, or if exposed to excessive heat or liquid.
- Clean your device regularly with a dry and soft cloth.
- Do not use liquids or cleaning products.
Note : Before cleaning, remove earbuds from the case, and disconnect the USB cable from both the case and your computer or power adaptor.
Bluetooth
This product is designed for use with mobile devices that support Bluetooth
standard specified by Bluetooth SIG, Inc. and are compatible to the following
Bluetooth profile:
Bluetooth profile
- HFP – Hands-free profile
- A2DP – Advanced audio distribution profile (Bluetooth stereo supported)
- AVRCP – Audio video remote control profile
It is considered improper use when this product is used for any application not named in this user manual. TCL Communication Ltd. bears no responsibility for accidents or damage caused by improper use of this product.
Hearing loss
Listening to sound at high volume may cause permanent hearing loss. Check the volume after inserting earbuds in your ears and before playing audio.
WARNING : To prevent possible hearing damage, do not listen at high volume levels for long periods.
Medical device interference
Your device contains magnets which may interfere with medical devices such as
pacemakers, defibrillators, or other medical devices within the range of 15 cm
(6 inches).
IF YOU ARE A USER OF ANY OF THESE MEDICAL DEVICES, PLEASE CONSULT WITH YOUR PHYSICIAN.
Choking hazard
Your device may present a choking hazard or cause other injury to small
children. Keep them away from small children.
Charging
Charge the case with the supplied USB cable. Only charge with an adaptor that
is compliant with the applicable international and regional safety standards.
Charging with other adaptors could cause damage to the case or pose a risk of
injury or death. It is important to keep your device and the power adaptor in
a well-ventilated area when charging. Don’t use damaged cables or chargers.
Battery
Do not attempt to replace the device batteries yourself. You may damage the
batteries, which could cause overheating and injury. The batteries in your
device should be serviced only by an authorized service provider.
Batteries must be recycled or disposed of separately from household waste.
Don’t incinerate the batteries. Check your country’s local waste regulations
for the proper disposal of electronic products.
Operating temperature
Your device is designed to work and be stored in ambient temperatures between 0 °C and 45 °C (32 °F and 113 °F). Your device can be damaged and battery life shortened if stored or operated outside of these temperature ranges.
Regulatory compliance information
This section introduces regulatory information, certification, and compliance
information specific to your product.
Electromagnetic fields (EMF)
This product complies with all applicable standards and regulations regarding
exposure to electromagnetic fields.
FCC compliance statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operated
in conjunction with any other antenna or transmitter.
Canadian compliance statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CAN ICES-3(B)/NMB-3(B)
IC Radiation Exposure Statement
This equipment complies with Canada’s radiation exposure limits set forth for
uncontrolled environments. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Caution : The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
California battery charger efficiency
Declaration of conformity
Hereby, TCL Communication Ltd. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
You can find the Declaration of Conformity at https://www.tcl.com/global/en /service-support-mobile/eu-doc.html.
Disposal and recycling information
At TCL, we continually strive to improve our operations and products and
minimize our impact on the environment.
Your product is designed and manufactured with high-quality materials and
components, which can be recycled and reused. Please observe the local
regulations regarding the disposal of packaging materials, exhausted batteries
and old equipment. For recycling information, please visit
www.tcl.com.
This symbol on a product means that the product is covered by European
Directive 2012/19/EU.
This symbol means that the product contains a built-in rechargeable battery
covered by European Directive 2013/56/EU which cannot be disposed of with
normal household waste. We strongly advise you to take your product to an
official collection point.
FAQ’s
Can I clean the earbuds and case with liquids or cleaning products?
No, you should only clean your device with a dry and soft cloth. Liquids or cleaning products can damage sensitive electronic components.
Can I replace the batteries in the device myself?
No, attempting to replace the batteries yourself may damage them and cause overheating. The batteries should only be serviced by an authorized service provider.
What should I do if my device interferes with my medical device?
If you are a user of pacemakers, defibrillators, or other medical devices, consult with your physician to ensure your device does not interfere with them.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>