Visionaid v1.2 Readeasy Evolve Max User Guide
- June 10, 2024
- Visionaid
Table of Contents
Visionaid v1.2 Readeasy Evolve Max
Removing & Connecting the Camera
- The camera is stored at the back of the unit, along the bottom. With the unit facing towards you, run your fingers 1 inch (2.5cm) up the back of the left edge. You will feel a half circle shaped cut-out. Push the camera head backwards via this recess & fully remove it.
- Unfold the camera
- Locate the camera slot, positioned on the top of the unit, at the front, 1.4 inches (3.5cm) from the left-hand side.
- With the shorter arm (containing the USB port) facing downwards & the other part of the arm facing towards you, angle the camera head a few degrees forwards & gently insert into the camera slot.
Plugging In
Plug the tip of the power brick into the unit’s power socket, located on the rear of the unit, on the far-right hand-side, 2.5 inches (6cm) up (a round area with a round recess). Ensure the power brick’s cable is plugged in and connect it to the mains.
Turning On / Off
The on / off button is located on the top back right of the machine. It is a round button recessed in a round hole. It illuminates blue when the device is on. It takes 20 seconds for ReadEasy to start & announce it is ready.
Positioning Documents for Capture
- Align the top edge of A4 (Letter) documents with the front of the unit.
- Align A3 (Tabloid), magazines and larger documents in landscape (long edge left-to-right). Push the document up against the unit and slide it right so that the right edge of the document is in line with the edge of the opened fold-out positioning guide.
- For thick books, packets, boxes or cylindrical objects, position them directly below the centre of the camera for best results.
Controls
- Capture (quick press): Green rectangular button located on the far right. It has a raised tactile line at the bottom.
- Capture as Table (press & hold): Only to be used when table documents are not automatically recognised correctly.
- Play / Pause: Blue circular button located between the two grey crescent buttons. It has a raised bump in the centre.
- Next & Previous sentence: Grey right & left crescent buttons located to the right & left of the Play / Pause button. They have raised right & left arrows in the middle of them.
- Next & Previous cell (when in table)
- Press & hold 3 or 4: Next & Previous word (with spelling on release)
- Press & hold 2 & quick press 3 or 4: Next & Previous Paragraph
- Next & Previous Row (when in table)
- Faster & Slower: Yellow, in-line, half-tablet shaped buttons on the far left. They have up and down facing arrows on them.
- 5 & 6 together: Cycle Reading Voice
- Press & hold 2 & quick press 5 or 6: Cycle Recognition Profiles
Additional Controls
- For additional controls, such as enhanced navigation and changing recognition profiles, please read the complete user manual.
Volume and Headphones socket
- To increase or decrease the volume, raise or lower the volume slider. This is located on the right edge of the machine, 1.5 inches (4 cm) from the back.
- To use the included headphones (or any others with a 3.5mm jack), plug them into the headphone socket. This is located on the right-hand edge of the machine, at the bottom of the volume slider section.
Assistance
- If you have any queries with the operation of your ReadEasy Evolve MAX, please contact your local distributor.
Designed and Manufactured by
Visionaid International Ltd
- Bridge Lodge, Spalding Common, Spalding, Lincolnshire PE11 3AU United Kingdom
- Telephone: +44 (0)1775 711 977
- Email: info@visionaid.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>