Charbroil 461731603 Grill Installation Guide

Charbroil 461731603 Grill

Product Specifications

• Model: Charbroil 461731603
• Parts Included: Leg Assembly, Front Panel, Side Support Brace, Carriage Bolts, Tee Knobs, Grill Lid, Handle Assembly, Metal Wing Nuts, Hinge Pins, Hitch Pins, Logo Plate
• Material: Metal
• Color: Black
• Dimensions: Varies based on assembly

Product Usage Instructions

Assembly:

1. Leg Assembly:

2. Lay leg assemblies on their sides.

3. Place front panel on legs.

4. Attach braces to the inside of legs.

5. Secure with carriage bolts and tee knobs.

6. Grill Bottom Assembly:

7. Stand cart upright.

8. Ensure ignitor wire is connected to ignitor.

9. Place grill bottom onto supports with control panel overlapping
   the front panel.

10. Secure with carriage bolts and wing nuts.

11. Grill Lid Assembly:

12. Attach lid to grill bottom using hinge and hitch pins.

13. Attach handle assembly to lid with metal wing nuts.

14. Snap logo plate into grill lid.

Frequently Asked Questions

• Q: How do I prevent scratching during assembly?
  • A: To prevent scratching, lay the grill on the packing material while assembling.
• Q: How should I position the tee knobs during assembly?
  • A: Leave the tee knobs loose on the right side during assembly.
• Q: What should I do if the lid style varies?
  • A: Follow the instructions provided for attaching the handle assembly and logo plate, regardless of lid style variation.

Parts to assemble: 2 Leg Assembly 1 Front Panel 1 Side Support Brace 4 Carriage Bolt, 2″ 4 Plastic Tee Knob

A. Lay leg assemblies on their sides. B. Place front panel on legs. C. Braces attach to inside of legs. D. Secure with carriage bolts and tee knobs.
NOTE: Leave tee knobs loose on right side.
Front Panel

Leg Assembly

Leave these loose.

Qty. 4 Qty. 4

Side Support Brace (Fits inside legs.)
NOTE: To prevent scratching, lay grill on packing material to assemble.

4

Parts to assemble: 1 Grill Bottom Assembly 4 Carriage Bolt, 1¼” 4 Metal Wing Nut
A. Stand cart upright. B. Make sure ignitor wire is connected
to ignitor. C. Place grill bottom onto supports. Control
panel overlaps front panel. D. Secure with carriage bolts and wing nuts.

Ignitor Wire

Qty. 4

Grill Bottom Control Panel

Qty. 4

7

Parts to assemble: 1 Grill Lid 1 Handle Assembly 2 Metal Wing Nut 2 Hinge Pin 2 Hitch Pin 1 Logo Plate
A. Attach lid to grill bottom with hinge and hitch pins.
B. Attach handle assembly to lid with two metal wing nuts.
C. Snap logo plate into grill lid.

Handle Assembly
Grill Lid
(Lid style may vary.)

References

• Repair Your Grill: Shop Replacement Parts for 24,880 Models
• Charbroil Grill Parts - Select From 3617 Models

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>