TRIKDIS FireCom Empower Your Fire Security Owner’s Manual

: July 10, 2024
: TRIKDIS

Table of Contents

TRIKDIS FireCom Empower Your Fire Security
Product Usage Instructions
Messages to the security company
Inputs and outputs
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TRIKDIS FireCom Empower Your Fire Security

Specifications:

LTE Modem Frequencies: EU (Europe), LA (Latin America)
Power Supply Voltage: 15-32 V DC, 2.5A
Current Consumption: Up to 300 mA (transmitting), Up to 2.5 A (after connecting the maximum possible load with external devices)
Backup Power Source: Battery charge current up to 500 mA
Power Voltage and Current for External
Devices: 12 V DC, up to 1 A
Transmission Protocol: TRK, SIA DC-09_2007, SIA DC-09_2012, SIA DC-09_IPcom, TL150
Encryption Key: 6 symbol encryption key
Connection to CMS: TCP/IP or UDP/IP
LAN Module: LAN network configuration type
SIM Card: Built-in DHCP or manual 2, NANO size
Report Transmission Directions:
- To main and backup receivers of 2 different security companies
- To Protegus 2 cloud, to iOS/Android Protegus 2 mobile apps
- To 8 mobile phones via SMS messages
- Calls 8 mobile phones
Event Reporting Transmission Channels: 4G, Ethernet (LAN), SMS, Call
Message Encryption: Yes
Internal Clock: Yes
User: 40
Dual Purpose Terminals [I/O]: 10; IN or OUT function selected during programming. When IN is selected, available types: NC, NO, EOL, EOL_T, ATZ, ATZ_T. When OUT is selected, the terminal becomes open collector (OC) type with up to 100 mA current

Product Usage Instructions

Installation and Setup

Ensure power supply voltage is within the specified range (15-32 V DC, 2.5A).
Connect additional modules for expandable input/output options via RS485.
Configure the device settings either using a USB cable or remotely using TrikdisConfig software.

Messaging and Control

Send SMS messages about events to users.
Use the Protegus 2 application for push notifications and special sound event alerts.
Enable remote temperature monitoring.

User Interaction

FireCom can call selected phone numbers (up to 8 users) for notifications.
Remote control of outputs is possible via the Protegus 2 app,by calling the device’s phone number, or through SMS messages.

Firmware Updates

Remote updating of firmware is supported for easy maintenance and enhancements.

Access Levels:

Two access levels are available for setting parameters: one for the installer and another for the administrator.

Frequently Asked Questions (FAQ):

Q: Can FireCom report events to multiple monitoring centers simultaneously?
A: Yes, FireCom supports reporting events to main and backup receivers of two different security companies.
Q: How many users can FireCom call for notifications?
A: FireCom can call up to 8 mobile phones for event notifications.

Your Solution for Reliable Fire Communication
As a security company or installer, you understand the critical importance of ﬁre communication. Don’t compromise on reliability and performance. FireCom, the ultimate ﬁre communicator that ensures seamless and secure ﬁre reporting to monitoring centers. With its cutting-edge features and robust design, FireCom is the trusted choice for security professionals who demand the best. Secure your world with FireCom today.

Support for CID and SIA DC09 Reporting
FireCom provides ﬂexible reporting options, allowing you to choose the method that best ﬁts your monitoring center requirements.

Compact Design with Multiple Enclosure Options
FireCom comes in small plastic enclosure for easy integration into ﬁre panels, as well as medium plastic or metal enclosure options with additional power supply, battery, and expansion card for added versatility.

Wide Power Input Range and Backup Battery Charger
FireCom can be powered from 24V ﬁre panels or external power supply (15-32V DC) and includes a backup battery charger for uninterrupted operation.

LTE or LTE-M Connectivity with 2 SIM Card Holders
FireCom oﬀers reliable and secure connectivity options with LTE or LTE-M, and the convenience of 2 SIM card holder for easy setup.

Onboard Temperature Sensor and Watchdog Timer
FireCom features built-in temperature sensing and watchdog timer for enhanced performance and reliability.

Expandable Input/Output Options
The FireCom system can be easily expanded by adding extra modules that connect to RS485, allowing for additional inputs (zones). This ﬂexibility caters to various installation requirements.

Indication and Control
FireCom includes onboard buzzer, LED indicators for system status, connector for LCD board for advanced status indication, reset and silence button.

Messages to the security company

Sends events via the built-in LAN module or cellular 4G modem.
Events are sent via available communication channels with the selected priority.
Any CMS can receive reports, as long as they have TRIKDIS software/IP receiver or any other manufacturer’s IP receiver supporting SIA DC-09 IP protocol.
Prioritizing the transmission of events to the CMS: messages are ﬁrst transmitted to the CMS and only then to Protegus 2.
Possibility to send event reports to CMS of two diﬀerent security companies.
Event messages are sent in Contact ID or SIA codes.

Messages to users

Calls selected phone numbers (up to 8 users).
Sends SMS messages about events.
Push and special sound event notiﬁcations using the Protegus 2 application.
Remote temperature monitoring.

Remote control of outputs

Via Protegus 2 app.
By calling the device‘s phone number.
Via SMS messages.

Settings and installation

Quick and easy installation.
Device conﬁguration either using an USB cable or remotely using TrikdisConﬁg software.
Remote updating of ﬁrmware.
Two access levels (types of accounts) for setting parameters: for the installer and for the administrator.

Inputs and outputs

3 relay outputs (1 A, 30V DC).
Input “FLOOP” is intended for connection of two-wire ﬁre detectors.
10 I/O terminals, each of which can be set as an input (IN) or output (OUT) terminal. Selectable Input (IN) types: NC, NO, EOL, EOL-T, ATZ, ATZ-T. Resistors of diﬀerent ratings can be used in EOL and ATZ circuits.
With iO expander modules, the number of IN inputs can be expanded up to 32 units, and the number of OUT outputs can be expanded up to 16 units.
RS485 bus is used to connect iO series expander modules.

Parameter	Description

LTE modem frequencies: EU (Europe)
LA (Latin America)| LTE-FDD: B1/B3/B5/B7/B8/B20/B28
LTE-FDD: B2/B3/B4/B5/B7/B8/B28/B66
Power supply voltage| 15-32 V DC, 2.5A
Current consumption| Up to 50 mA (stand-by).
Up to 300 mA (transmitting).
Up to 2.5 A (after connecting the maximum possible load with external devices).
Backup power source
[BAT]| 12 V lead – acid battery, 4 Ah/7 Ah
Battery charge current| Up to 500 mA
Power voltage and current for external devices [AUX]| 12 V DC, up to 1 A
Transmission protocol| TRK, SIA DC-09_2007, SIA DC-09_2012, SIA DC-09_IPcom, TL150
Encryption key| 6 symbol encryption key.
Connection to CMS| TCP/IP or UDP/IP
Event codes| Contact ID, SIA codes.
LAN module| Yes, built-in
LAN network configuration type| DHCP or manual
SIM card| 2, NANO size
Report transmission directions|

To main and backup receivers of 2 different security companies;
To Protegus 2 cloud, to iOS/Android Protegus 2 mobile apps;
To 8 mobile phones via SMS messages.
Calls 8 mobile phones.

Event reporting transmission channels| 4G, Ethernet (LAN), SMS, call
Message encryption| Yes
Internal clock| Yes
User| 40
Dual purpose terminals [I/O]| 10; IN or OUT function selected during programming. When IN is selected, available types: NC, NO, EOL, EOL_T, ATZ, ATZ_T. When OUT is selected, the terminal becomes open collector (OC) type with up to 100 mA current
No. of groups| 8
No. of zones| 10 (20 zones if using ATZ), (can be expanded to 32 zones using expanders)
No. of PGM outputs| 3 relay (1 A, 30V DC). (can be 13 if IO terminals are set as outputs. Can be expanded to 16 outputs with expanders)
Buffer memory capacity| 60 events
Events log memory| Up to 1000 events. Oldest entries deleted automatically.
Configuration| Remotely using TrikdisConfig software or locally using USB Type-C. Remotely using SMS messages.
1-Wire data bus length [1 WIRE]| Up to 30 m
Compatible temperature sensors| Maxim«/Dallas« DS18S20, DS18B20; AM2301 series
Max. number of temperature sensors connected to 1-Wire data bus| 8 (Dallas) or 1 (if an AM2301 series sensor is used)
RS485 bus| 2
RS485 bus length| Up to 100 m
Supported modules| iO-8 – expander module;
iO-MO – iO-WL radio wave transceiver; iO-LORA – expander module;
iO8-LORA – expander module; PB-LORA – panic button;
REL-LORA – expander module.
Operating environment| Temperature from -10 C to +50 C, relative air humidity – up to 80% at +20 C.
Dimensions| 139 x 78 x 20 mm
Weight| 1.19 kg