KOHLER Verdera K-99003-TLC 20×30 Inch Lighted Medicine Cabinet Owner’s Manual
- July 10, 2024
- Kohler
Table of Contents
KOHLER Verdera K-99003-TLC 20×30 Inch Lighted Medicine Cabinet
Specifications
- Product: 20 x 30 Lighted Medicine Cabinet K-99003-TLC
- Dimensions: 20″ x 30″
- Material: Chip-resistant finish
- Electrical Outlet Rating: 120V, 15A, 60Hz
- Lighting Output: 65 lumens per watt
- Shelf: Internal aluminum with two electrical outlets
- Shelves: Two adjustable tempered-glass shelves
- Codes/Standards: UL Listed, cUL Listed, UL 962 C22.2 No. 0 CA Title 24 JA8
Product Usage Instructions
Features
- Internal LED light guides provide optimally bright bathroom vanity lighting for grooming tasks
- Brightness at 2200 lumens ensures consistent lighting with no hot spots or dark spots. Produces 65 lumens per watt
- Approx. 3000 Kelvin light appearance delivers a neutral light ideal for overall bathroom aesthetics as well as tasks
- Minimum 90 CRI (color rendering index) lets you see yourself in the truest light for makeup application, grooming, and skincare
- Integrated LED bulbs have an estimated life expectancy of 59,000 hours
- Compatible with wall-mount LED dimmers (not included), which allow you to control lighting from multiple locations in the space
- The internal aluminum shelf has two electrical outlets for powering small devices such as toothbrushes and shavers
- Two adjustable tempered glass shelves offer additional bathroom storage
- The front mirror, inside door mirror, and back panel mirror provide superior visibility
- 110° door swing with slow-close hinges
Material
Anodized aluminum construction with a durable rustproof and chip-resistant
finish
Installation
- Follow the installation instructions provided with the product.
- For recess mount, frame the wall cavity and secure the cabinet to framing studs.
- Ensure electrical and water supply lines are rerouted from the cavity.
- Consult a professional for any encountered drain or vent piping.
- Can be installed with left- or right-hand swing
- Includes mounting hardware for surface or recessed installation
- Side kits for surface-mount installation sold separately
- Hang-and-secure mounting system for easier surface-mount installation
- Recommend professional electrician installation
Required Products/Accessories
K-99012 30″ mirrored side kit for medicine cabinet
Recommended Products/Accessories
K-23723 Faucet cleaner
Codes/Standards
- UL 962
- C22.2 No. 0
- CA Title 24 JA8
- cUL Listed
- UL Listed
KOHLER® One-Year Limited Warranty
See the website for detailed warranty information.
Required Electrical Service
One circuit is required, protected with Class A Ground-Fault Circuit-
Interrupter (GFCI). Outside North America, this device may be known as a
Residual Current Device (RCD).
- Outlet, Lights: 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
- Lighting included: Yes
- Electrical component Outlet: 120 V, 15 A, 60 Hz
- rating: Lights: 120 V, 0.4 A, 60 Hz
Electrical Requirements
- One circuit required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI).
- For international use, use a Residual Current Device (RCD).
Notes
Install this product according to the installation instructions. To recess
mount, the wall cavity must be framed and the cabinet secured to framing
studs. Reroute electrical or water supply lines from the cavity. Consult a
professional if drain or vent piping is encountered, or if the wall is load-
bearing. To determine the height of the cabinet, ensure the door will clear
all obstacles (such as a faucet). A minimum 3″ (76 mm) distance is required.
- Cutout for recess-mount installations: 18-1/2″ (470 mm) wide x 28-1/4″ (718 mm) high x 3-11/16″ (94 mm) deep. A dimmer switch is required. This product is compatible with most residential dimmer switches intended for incandescent and dimmable LED bulbs.
- Cutout for recess-mount installation: 19-1/2″ (495 mm) width x 28-1/4″ (718 mm)
Dimension
Dimmer Switch Compatibility
- A dimmer switch is required and compatible with most residential dimmer switches for incandescent and dimmable LED bulbs.
Cutout Dimensions for Recess-Mount Installation
- Width: 18-1/2″,
- Height: 28-1/4″,
- Depth: 3-11/16″
Height Considerations
- Ensure the cabinet door clears all obstacles, maintaining a minimum 3″ distance.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications. For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada 6-17-2024 22:24 – US
Frequently Asked Questions
Q: Can this medicine cabinet be installed without professional help?
A: While it is possible for DIY installation, professional help is recommended
for encountering drain or vent piping.
Q: Are additional accessories necessary for installation?
A: The K-99012 30 mirrored side kit is required, and the K-23723 Faucet
cleaner is recommended for maintenance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>